Accessories

It is designed to accommodate thermostatically controlled objects in the inner bath of the T40 liquid thermostat. A basket with a height-adjustable bottom allows objects to be immersed in the coolant to the required depth. Overall dimensions 305x305x390 mm Internal dimensions 260x250mm Weight 2.8 kg

ConFlat (CF) standard connections are used еo ensure the connection of components of vacuum systems operating in the field of high and ultra-high vacuum.

The height-adjustable bottom allows the tubes to be immersed in the coolant to the required depth. Overall dimensions 515x310x215 mm Weight 2.8 kg

When determining the total gas content (air) and humidity of transformer oil, direct injection of transformer oil into the evaporator of the chromatograph is used. The sample volume is up to 25 µl, the evaporator temperature is 250-350 °C. The main problem with such an input is the protection of the chromatographic column from transformer oil. For this purpose, a special evaporator is used with the possibility of oil accumulation at the bottom of the evaporator and its subsequent discharge, and a replaceable pre-column that protects the column from oil residues that have passed the evaporator. technical specifications The volume of the evaporator is 10 ml. The number of replaceable pre—columns in the device kit is 5. The temperature of the evaporator is from 250 to 350 °C. The possibility of draining the transformer oil accumulated in the evaporator.

Four workstations with a diameter of 140 mm and a height-adjustable bottom allow the sample containers to be immersed in the coolant to the required depth. Overall dimensions 515x310x215 mm Weight 3.5 kg

It is intended for placement in the inner bath of the liquid thermostat VT25 or VT25-2 forms with samples when testing grouting cements in accordance with the State Standard 26798.2. Ventilation openings are nedeed for better convection of the coolant. Internal dimensions 290x250x140 mm Weight 2.5 kg

It is used for determining the pour point of petroleum products in accordance with GOST 20287 (method B).

It is used in determining the pour point of petroleum products in accordance with the State Standard 20287 (method B).

The ISO-KF connection (DIN 28 403 and ISO 2861) allows quick installation and replacement of components in vacuum systems. The connection consists of two symmetrical ISO-KF flanges (1), a centering ring with an O-ring seal (2) and a quick-release clamp (3). High-vacuum ISO-KF connections can be mounted without using a tool by simply turning the nut of the quick-release clamp.