Glass

Designed to count the time interval of laboratory procedures. The marking of the nominal time is on the glass. Made of glass HS1 according to GOST 21400-75.TU 4321-009-52876859-2005

Designed to count the time interval of laboratory procedures. The marking of the nominal time is on the glass. Made of glass HS1 according to GOST 21400-75.TU 4321-009-52876859-2005

Designed to count the time interval of laboratory procedures. The marking of the nominal time is on the glass. Made of glass HS1 according to GOST 21400-75. TU 4321-009-52876859-2005

Borosilicate glass is used to make the cell body due to its chemical inertness and resistance to high temperatures. It does not react with most chemicals and has high thermal stability, which allows it to be used in a variety of conditions. The advantages of borosilicate glass electrochemical cell include: - High chemical resistance: Borosilicate glass is highly resistant to various chemical agents, allowing the cell to be used with a variety of reagents. - Thermal Resistance: Borosilicate glass can withstand high temperatures, allowing you to work with high temperature reactions or use the cell in elevated temperature environments. - Transparency: Borosilicate glass is transparent to visible light, allowing the processes occurring inside the cell to be observed. - Mechanical strength: Borosilicate glass has high impact resistance and mechanical strength, which allows the cell to be used in a variety of operating conditions. Borosilicate glass electrochemical cells are widely used in various fields, including chemical, biological, pharmaceutical and energy industries, as well as scientific research. They are reliable and efficient devices that allow various electrochemical processes to be carried out.

Designed to count the time interval of laboratory procedures. The marking of the nominal time is on the glass. Made of glass HS1 according to GOST 21400-75.TU 4321-009-52876859-2005

Designed to count the time interval of laboratory procedures. The marking of the nominal time is on the glass. Made of HS1 glass according to GOST 21400-75.TU 4321-009-52876859-2005

Designed to count the time interval of laboratory procedures. The marking of the nominal time is on the glass. Made of glass HS1 according to GOST 21400-75.TU 4321-009-52876859-2005

The test tubes contain a buffer solution of sodium citrate, which is an anticoagulant. The ratio of citrate to the amount of blood taken is 1:9. Material for research............... citrate plasma, blood Scope of application............................ coagulation study Centrifugation................................ 2000 - 2500 g - 10-15 minutes

The PrimeLab water jet pump is a simple but effective laboratory device for pumping air from an evaporator, reactor and other equipment, as well as creating a vacuum without connecting to an electrical network. For operation, the use of water supply is sufficient. The pump is made of tempered heat-resistant glass, which ensures a long service life in the absence of serious mechanical damage. At the top of the pump there is a tube to which a soft hose is attached. Through it, water enters the water jet pump. There is a drain pipe at the bottom through which the water drains. A device is connected to the side tube in which it is necessary to pump out the air.

Flat-bottomed flask P-2-1000-42 Primelab, TS is one of the most popular types of flasks for a wide range of laboratory processes. This is due to its successful form, which has many advantages. Among the main ones: • A flat bottom with a spherical shape, which allows you to place the flask on any flat surface without an additional stand. • Ball shape with a diameter of 131 mm, in which the entire contents are evenly heated and brought to a boil; • Narrow neck (diameter 42 mm), protecting against excessive evaporation when boiling. Designed to work with any substance whose volume does not exceed 1000 ml.

The conical flask KN-2-500-34 Primelab is made of borosilicate glass, resistant to temperature changes. Designed for chemical reactions in laboratory conditions, including storage, mixing, heating, cooling and more. Has the following characteristics: • Volume – 500 ml • Neck diameter – 34 mm • Base diameter – 105 mm • Height – 180 mm.

Designed for dispensing volatile liquids. The applied scale of brown or white colors is completely resistant to any influences. TU 9464-013-52876351-2014, GOST 1770-74, pack.6/144 pcs, MiniMedProm Manufactured according to specifications 9464-013-52876351-2014 in accordance with the technical requirements of GOST 1770-74. The products are made of chemical laboratory glass according to GOST 21400. Version 2, accuracy class 2. RU No. RZN 2016/4740 dated 10/25/2021