Designed to measure the temperature in the external circuit of the LOIP LT-200 and LT-400 series thermostats. An external temperature sensor is connected to the temperature control unit and directly monitors the temperature in the external circuit of the thermostat, which significantly increases the accuracy of temperature maintenance.

Temperature range, °C from -50 to +250

Cable length, m 1.4

TNS-index black-ball meter

from 9 000 ₽

Eco-E

Москва

measuring equipment (except for electro- and chemistry)

occupational Safety and Health

accessories

metrology

Produced in: Moscow

External VT-D temperature sensor

It is necessary for accurate temperature maintenance in external objects. The diameter and length of the submerged part are 3 and 240 mm, respectively. The nominal static characteristic of Pt1000.

Tomsk

Produced in: Tomsk

Heat flow sensors DRTP-15

Mendeleevo

Produced in: Mendeleevo, Moscow region

Thermoelectric converter THA.GPKSH.011

The thermoelectric converter THA.GPKSH.011 is designed to measure the temperature of gaseous and liquid chemical environments that do not destroy protective fittings, as well as the surfaces of solids.

Termokon

Korolev

measuring equipment (except for electro- and chemistry)

Produced in: Moscow region, Korolev

Thermal controller AK-10.03

Mendeleevo

Produced in: Mendeleevo, Moscow region

External temperature sensor PT 1000

from 6 120 ₽

Основные характеристики Диапазон измерения температуры, °С От -70 до + 200 Погрешность измерения температуры, °С, не более 1 Номинальное сопротивление при 25 С,кОм 1.0 Длина рабочей части PT 1000 (погружной) 250 мм Длина ручки 50 мм, диаметр ручки М12 Длина провода до 600 мм

Mytishchi

Produced in: Mytishchi, Moscow region

External temperature sensor PT 1000, height 40 cm

Main characteristics Temperature measurement range, °C From -70 to + 300 Temperature measurement error, °C, no more than 1 Nominal resistance at 25 C, kOhm 1.0 Dimensions, weight Height 40 cm Sensor projection from the stand is 16 cm

Mytishchi

Produced in: Mytishchi, Moscow region

Thermoelectric converter THA.GPKSH.013

The thermoelectric converter THA.GPKSH.013 is designed for measuring the temperature of gaseous and liquid chemical environments that do not destroy the protective shell. It measures the temperature in the clean air atmosphere, gaseous chemically non-aggressive environments with humidity up to 95 %

Termokon

Korolev

chemical analysis

measuring equipment (except for electro- and chemistry)

Produced in: Moscow region, Korolev

Sensor TH-485

VNIIFTRI

Mendeleevo

measuring equipment (except for electro- and chemistry)

Produced in: Mendeleevo, Moscow region

BOI-01 universal operator console

from 24 900 ₽

Eco-E

Москва

barometer

measuring equipment (except for electro- and chemistry)

Produced in: Moscow

May be interested in

Tripod for test tubes LA-203

Number of sockets, pcs 33 Hole diameter, mm 17 Immersion depth, mm 200 Overall dimensions (WxDxH), mm 235x80x215

Saint Petersburg

Produced in: Saint Petersburg

Tripod for placing butyrometers in cryostats and thermostats LA-209

Number of sockets, pcs 11 Hole diameter, mm 25 Immersion depth, mm 200 Overall dimensions (WxDxH), mm 180x80x215

Saint Petersburg

Produced in: Saint Petersburg

Discs with high sealing capacity for SVB connections (aluminum) for ISO-F flanges

Kazan

Produced in: Kazan

It is designed for thermostating glasses, flasks and evaporating cups with samples in the laboratory bath LB33 and LB33-Sh. Overall dimensions 310x250x210 mm Weight 2.0 kg

Tomsk

Produced in: Tomsk

Tripod for test tubes LA-207

Number of sockets, pcs 21 Hole diameter, mm 17 Immersion depth, mm 200 Overall dimensions (WxDxH), mm 180x80x215

Saint Petersburg

Produced in: Saint Petersburg

Clamps for ISO-K

The clamp connection (DIN 28 404 and ISO 1609) allows connecting components from DN 63 to DN 630 in any position, on any fixed flange regardless of the location of the bolt holes.

Kazan

Produced in: Kazan

Copper gaskets for CF flanges

Copper gaskets for CF flanges (oxygen-free copper).

Kazan

Produced in: Kazan

Distilate Cooler for AE-4/AE-5 distiller

from 5 160 ₽

The distillate cooler is installed directly on the body of the aquadistillator and provides cooling of the finished distillate from 80 ° C to 40 ° C.

Belgorod

Produced in: Belgorod

Temperature equalization unit THERMOTEST-B1

It is designed to improve short-term temperature stability during verification and calibration of electronic thermometers LT 300 (except LT-300-F), LT and ExT-01/1 in calibration thermostats TERMOTEST 100, TERMOTEST-100-40, TERMOTEST 05 and TERMOTEST-05-1.

Termeks

Tomsk

general laboratory

temperature equalization unit

accessories

Tomsk

Produced in: Tomsk

Clamping flanges with a branch pipe (nickel-plated steel / stainless steel)

Kazan

Produced in: Kazan

Fixing unit to the LA-130 tripod stand

Saint Petersburg

Produced in: Saint Petersburg

Basket T40-K

It is designed to accommodate thermostatically controlled objects in the inner bath of the T40 liquid thermostat. A basket with a height-adjustable bottom allows objects to be immersed in the coolant to the required depth. Overall dimensions 305x305x390 mm Internal dimensions 260x250mm Weight 2.8 kg

Tomsk

Produced in: Tomsk

KF flanges in the assortment

Kazan

Produced in: Kazan

Accessories for water distillers

from 1 100 ₽

Zhukov

Produced in: Kaluga region, Zhukov

Adapters for CF/ ISO-K SVB connections

ConFlat (CF) standard connections are used еo ensure the connection of components of vacuum systems operating in the field of high and ultra-high vacuum.

Kazan

Produced in: Kazan

The height-adjustable bottom allows the tubes to be immersed in the coolant to the required depth. Overall dimensions 515x310x215 mm Weight 2.8 kg

Tomsk

Produced in: Tomsk

Four workstations with a diameter of 140 mm and a height-adjustable bottom allow the sample containers to be immersed in the coolant to the required depth. Overall dimensions 515x310x215 mm Weight 3.5 kg

Tomsk

Produced in: Tomsk