Catalog
Back to search results
KF flanges in the assortment
Back to search results
KF flanges in the assortment
Clamps for ISO-K
The clamp connection (DIN 28 404 and ISO 1609) allows connecting components from DN 63 to DN 630 in any position, on any fixed flange regardless of the location of the bolt holes.
Vakuummash
Kazan
Produced in: Kazan
Discs with high sealing capacity for SVB connections (aluminum) for ISO-F flanges
Vakuummash
Kazan
Produced in: Kazan
Crimp support rings (stainless steel) for sealing rings with high sealing capacity
The ISO-KF connection (DIN 28 403 and ISO 2861) allows quick installation and replacement of components in vacuum systems. The connection consists of two symmetrical ISO-KF flanges (1), a centering ring with an O-ring seal (2) and a quick-release clamp (3). High-vacuum ISO-KF connections can be mounted without using a tool by simply turning the nut of the quick-release clamp.
Vakuummash
Kazan
Produced in: Kazan
Clamping flanges with a branch pipe (nickel-plated steel / stainless steel)
Vakuummash
Kazan
Produced in: Kazan
Adapters for CF / ISO-KF SVB connections
ConFlat (CF) standard connections are used еo ensure the connection of components of vacuum systems operating in the field of high and ultra-high vacuum.
Vakuummash
Kazan
Produced in: Kazan
CF flanges with a branch pipe
ConFlat (CF) standard connections are used to ensure the connection of components of vacuum systems operating in the field of high and ultra-high vacuum.
Vakuummash
Kazan
Produced in: Kazan
Double cross-shaped connectors
ConFlat (CF) standard connections are used to ensure the connection of components of vacuum systems operating in the field of high and ultra-high vacuum.
Vakuummash
Kazan
Produced in: Kazan
Bolts with mounting plate and gaskets
ConFlat (CF) standard connections are used to ensure the connection of components of vacuum systems operating in the field of high and ultra-high vacuum.
Vakuummash
Kazan
Produced in: Kazan
Set of screws, nuts and washers for CF flanges
ConFlat (CF) standard connections are used to ensure the connection of components of vacuum systems operating in the field of high and ultra-high vacuum.
Vakuummash
Kazan
Produced in: Kazan
Transitional centering rings (aluminum / stainless steel) with O-ring of circular cross-section
The ISO-KF connection (DIN 28 403 and ISO 2861) allows quick installation and replacement of components in vacuum systems. The connection consists of two symmetrical ISO-KF flanges (1), a centering ring with an O-ring seal (2) and a quick-release clamp (3). High-vacuum ISO-KF connections can be mounted without using a tool by simply turning the nut of the quick-release clamp.
Vakuummash
Kazan
Produced in: Kazan
CF bellows
ConFlat (CF) standard connections are used to ensure the connection of components of vacuum systems operating in the field of high and ultra-high vacuum.
Vakuummash
Kazan
Produced in: Kazan
Distilate cooler for the AE-25 distiller
from
8 550 ₽
The distillate cooler is installed directly on the body of the aquadistillator and provides cooling of the finished distillate from 80 ° C to 40 ° C.
Livam
Belgorod
Produced in: Belgorod
External temperature sensor PT 1000
from
6 120 ₽
Основные характеристики
Диапазон измерения температуры, °С От -70 до + 200
Погрешность измерения температуры, °С, не более 1
Номинальное сопротивление при 25 С,кОм 1.0
Длина рабочей части PT 1000 (погружной) 250 мм
Длина ручки 50 мм, диаметр ручки М12
Длина провода до 600 мм
Primelab
Mytishchi
Produced in: Moscow region, Mytishchi
Quartz cuvette
from
1 700 ₽
Designed for devices of the SF, Minigem, Specord series when operating in the spectral range from 260 to 2500 nm. Chemically resistant to acids (except hydrofluoric acid) and dilute alkalis.
MiniMed
Suponevo
Produced in: Bryansk region
CRYO basket-VT-06-K
It is designed to accommodate thermostatically controlled objects in the inner bath of the liquid low-temperature thermostat CRYO VT 06. The height-adjustable bottom allows objects to be immersed in the coolant to the required depth.
Internal dimensions 300x200x120 mm
Weight 2.7 kg
Termeks
Tomsk
Produced in: Tomsk
Holder of the TMP-D
It is designed for simultaneous polishing of four copper plates measuring 75×12.5×2 mm used in determining the corrosive effect of fuels in accordance with GOST ISO 2160, GOST 32329, GOST 6321, GOST 2917 and ASTM D130.
Termeks
Tomsk
Produced in: Tomsk
CRYO-W Basket-12-12/ 26K
It is designed to accommodate 26 tubes with a diameter of up to 12 mm when thermostated in the inner bath of a low-temperature liquid thermostat CRYO-VT-12 or CRYO-VT-12-1.
Overall dimensions 130x78x170 mm
Weight 0.2 kg
Termeks
Tomsk
Produced in: Tomsk
Clamps for ISO-K
The clamp connection (DIN 28 404 and ISO 1609) allows connecting components from DN 63 to DN 630 in any position, on any fixed flange regardless of the location of the bolt holes.
Vakuummash
Kazan
Produced in: Kazan
LA-230 cooling heat exchanger
Inner diameter, mm 6
Outer diameter, mm 8
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Basket VT25-K
It is intended for placement in the inner bath of the liquid thermostat VT25 or VT25-2 forms with samples when testing grouting cements in accordance with the State Standard 26798.2.
Ventilation openings are nedeed for better convection of the coolant.
Internal dimensions 290x250x140 mm
Weight 2.5 kg
Termeks
Tomsk
Produced in: Tomsk
Discs with high sealing capacity for SVB connections (aluminum) for ISO-F flanges
Vakuummash
Kazan
Produced in: Kazan
Tripod for test tubes LA-204
Number of sockets, pcs 27
Hole diameter, mm 22
Immersion depth, mm 200
Overall dimensions (WxDxH), mm 235x80x215
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Crimp support rings (stainless steel) for sealing rings with high sealing capacity
The ISO-KF connection (DIN 28 403 and ISO 2861) allows quick installation and replacement of components in vacuum systems. The connection consists of two symmetrical ISO-KF flanges (1), a centering ring with an O-ring seal (2) and a quick-release clamp (3). High-vacuum ISO-KF connections can be mounted without using a tool by simply turning the nut of the quick-release clamp.
Vakuummash
Kazan
Produced in: Kazan
LTA-KC thermometer case
The safety valves are conveniently fixed with magnets, and in the working position they can be fixed in the lower part of the case, without interfering with access to the thermometer.
Termeks
Tomsk
Produced in: Tomsk
Set of VT18-K devices
The set of devices is designed to accommodate thermostatically controlled objects in the inner bath of the VT18 or VT18-2 liquid thermostat when they are immersed to a depth of 40 or 70 mm from the bottom of the inner bath.
Overall dimensions 350x260x70 mm
Weight 2.1 kg
Termeks
Tomsk
Produced in: Tomsk
Clamping flanges with a branch pipe (nickel-plated steel / stainless steel)
Vakuummash
Kazan
Produced in: Kazan