Catalog
Back to search results
External VT-D temperature sensor
Back to search results
External VT-D temperature sensor
It is necessary for accurate temperature maintenance in external objects.
The diameter and length of the submerged part are 3 and 240 mm, respectively.
The nominal static characteristic of Pt1000.
The diameter and length of the submerged part are 3 and 240 mm, respectively.
The nominal static characteristic of Pt1000.
External temperature sensor PT 1000
from
6 120 ₽
Основные характеристики
Диапазон измерения температуры, °С От -70 до + 200
Погрешность измерения температуры, °С, не более 1
Номинальное сопротивление при 25 С,кОм 1.0
Длина рабочей части PT 1000 (погружной) 250 мм
Длина ручки 50 мм, диаметр ручки М12
Длина провода до 600 мм
Primelab
Mytishchi
Produced in: Moscow region, Mytishchi
Thermoelectric converter THA.GPKSH.013
The thermoelectric converter THA.GPKSH.013 is designed for measuring the temperature of gaseous and liquid chemical environments that do not destroy the protective shell. It measures the temperature in the clean air atmosphere, gaseous chemically non-aggressive environments with humidity up to 95 %
Termokon
Korolev
Produced in: Moscow region, Korolev
External temperature sensor LA-501
Designed to measure the temperature in the external circuit of the LOIP LT-200 and LT-400 series thermostats. An external temperature sensor is connected to the temperature control unit and directly monitors the temperature in the external circuit of the thermostat, which significantly increases the accuracy of temperature maintenance.
Temperature range, °C from -50 to +250
Cable length, m 1.4
LOIP
Saint Petersburg
Produced in: Saint Petersburg
External temperature sensor PT 1000, height 40 cm
Main characteristics
Temperature measurement range, °C From -70 to + 300
Temperature measurement error, °C, no more than 1
Nominal resistance at 25 C, kOhm 1.0
Dimensions, weight Height 40 cm
Sensor projection from the stand is 16 cm
Primelab
Mytishchi
Produced in: Moscow region, Mytishchi
Thermoelectric converter THA.GPKSH.011
The thermoelectric converter THA.GPKSH.011 is designed to measure the temperature of gaseous and liquid chemical environments that do not destroy protective fittings, as well as the surfaces of solids.
Termokon
Korolev
Produced in: Moscow region, Korolev
Distilate cooler for the AE-25 distiller
from
8 550 ₽
The distillate cooler is installed directly on the body of the aquadistillator and provides cooling of the finished distillate from 80 ° C to 40 ° C.
Livam
Belgorod
Produced in: Belgorod
External temperature sensor PT 1000
from
6 120 ₽
Основные характеристики
Диапазон измерения температуры, °С От -70 до + 200
Погрешность измерения температуры, °С, не более 1
Номинальное сопротивление при 25 С,кОм 1.0
Длина рабочей части PT 1000 (погружной) 250 мм
Длина ручки 50 мм, диаметр ручки М12
Длина провода до 600 мм
Primelab
Mytishchi
Produced in: Moscow region, Mytishchi
Quartz cuvette
from
1 700 ₽
Designed for devices of the SF, Minigem, Specord series when operating in the spectral range from 260 to 2500 nm. Chemically resistant to acids (except hydrofluoric acid) and dilute alkalis.
MiniMed
Suponevo
Produced in: Bryansk region
CRYO basket-VT-06-K
It is designed to accommodate thermostatically controlled objects in the inner bath of the liquid low-temperature thermostat CRYO VT 06. The height-adjustable bottom allows objects to be immersed in the coolant to the required depth.
Internal dimensions 300x200x120 mm
Weight 2.7 kg
Termeks
Tomsk
Produced in: Tomsk
Holder of the TMP-D
It is designed for simultaneous polishing of four copper plates measuring 75×12.5×2 mm used in determining the corrosive effect of fuels in accordance with GOST ISO 2160, GOST 32329, GOST 6321, GOST 2917 and ASTM D130.
Termeks
Tomsk
Produced in: Tomsk
CRYO-W Basket-12-12/ 26K
It is designed to accommodate 26 tubes with a diameter of up to 12 mm when thermostated in the inner bath of a low-temperature liquid thermostat CRYO-VT-12 or CRYO-VT-12-1.
Overall dimensions 130x78x170 mm
Weight 0.2 kg
Termeks
Tomsk
Produced in: Tomsk
Clamps for ISO-K
The clamp connection (DIN 28 404 and ISO 1609) allows connecting components from DN 63 to DN 630 in any position, on any fixed flange regardless of the location of the bolt holes.
Vakuummash
Kazan
Produced in: Kazan
LA-230 cooling heat exchanger
Inner diameter, mm 6
Outer diameter, mm 8
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Basket VT25-K
It is intended for placement in the inner bath of the liquid thermostat VT25 or VT25-2 forms with samples when testing grouting cements in accordance with the State Standard 26798.2.
Ventilation openings are nedeed for better convection of the coolant.
Internal dimensions 290x250x140 mm
Weight 2.5 kg
Termeks
Tomsk
Produced in: Tomsk
Discs with high sealing capacity for SVB connections (aluminum) for ISO-F flanges
Vakuummash
Kazan
Produced in: Kazan
Tripod for test tubes LA-204
Number of sockets, pcs 27
Hole diameter, mm 22
Immersion depth, mm 200
Overall dimensions (WxDxH), mm 235x80x215
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Crimp support rings (stainless steel) for sealing rings with high sealing capacity
The ISO-KF connection (DIN 28 403 and ISO 2861) allows quick installation and replacement of components in vacuum systems. The connection consists of two symmetrical ISO-KF flanges (1), a centering ring with an O-ring seal (2) and a quick-release clamp (3). High-vacuum ISO-KF connections can be mounted without using a tool by simply turning the nut of the quick-release clamp.
Vakuummash
Kazan
Produced in: Kazan
LTA-KC thermometer case
The safety valves are conveniently fixed with magnets, and in the working position they can be fixed in the lower part of the case, without interfering with access to the thermometer.
Termeks
Tomsk
Produced in: Tomsk
Set of VT18-K devices
The set of devices is designed to accommodate thermostatically controlled objects in the inner bath of the VT18 or VT18-2 liquid thermostat when they are immersed to a depth of 40 or 70 mm from the bottom of the inner bath.
Overall dimensions 350x260x70 mm
Weight 2.1 kg
Termeks
Tomsk
Produced in: Tomsk
Clamping flanges with a branch pipe (nickel-plated steel / stainless steel)
Vakuummash
Kazan
Produced in: Kazan