Equipment

Designation SSO-4.8/11 Power, kW 42 Diameter, mm 400 Height, mm 400

WB series baths can be used for sample evaporation, incubation, defrosting, conduction of chemical reactions. Temperature setting range, oC +35...+95 Temperature error, oC ±1.0 Protection against temperature exceeding RAINBOW TSR-150S F-C hydraulic thermostat Supply voltage, V 230+-10% Current consumption 3.3 A Power consumption, W 750 Overall dimensions L х W х H, mm 380 x 325 x 260 Bath dimensions L x W x H, mm 290 x 300 x 205 Total / engine capacity, 17.6/14.6 l

The electric drying vacuum compression cabinet SNVS-4,5.4,0/2-I2PD (autoclave) is designed for drying and heating various materials in an air environment, in vacuum, under pressure up to 1.5 atm. and in an inert gas environment at temperatures up to 250 oC.

KLM-D520-10-3 laser modules are optimal sources of coherent radiation for the construction of control and automation systems, alignment and marking devices, for scientific and medical purposes

Designed for measuring the average square values of the electric field strength in the frequency range from 10 kHz to 30 MHz in continuous generation mode.

Durable ceramic muffle; Semi-open heaters on four sides of the chamber; Microprocessor temperature controller; Conveniently located control panel and bright LED display; Ease of management and control; LED indicators of heater operation and protection operation; Automatic shutdown of heating when opening the door; The door opens up and faces the user with the cold side; Alarm when the current temperature exceeds the limits of the permissible range; Highly efficient thermal insulation of the housing; The furnace body is made of high-quality sheet steel and painted with heat-resistant powder paint.

The electric vacuum drying cabinet SHSV-27/3.5 is designed for drying and heating various materials in air and in vacuum at a maximum temperature of 350 ° C. In the model with the index "C", the door is made of heat- resistant glass. Technical specifications The electric cabinet operates at ambient temperature from 10 to 35 ° C and relative humidity up to 80% at 25 ° C Operating temperature- 350 ⁰C Power consumption - 2000 W The dimensions of the working chamber are 340x300x340 or Ø435x30 mm Dimensions WxDxH- 520x860x67 mm Weight - 75* kg (* - mass with microprocessor unit and pump)

Devices capable of generating oxygen have found the widest application in various fields of medicine. The equipment is also used in training centers, educational institutions and oxygen rooms. Medical oxygen concentrators make it possible to accelerate the recovery of patients suffering from cardiovascular diseases, chronic respiratory diseases, as well as other pathologies that make it difficult to saturate the blood with oxygen. This equipment is a mandatory equipment for anesthesiology and intensive care units. Oxygen concentrators demonstrate high efficiency in restorative treatment. Unlike oxygen sources, which use compressed gas, generators are characterized by high safety and efficiency Capacity: 330 l/min 19.8 m3/h 26.4 kg/h Oxygen purity: 95 % Oxygen pressure: 4-5 bar

The electric vacuum drying cabinet SHSV-65/5.0 is designed for drying and heating various materials in air and in vacuum at a maximum temperature of 500 ° C. In the model with the index "C", the door is made of heat- resistant glass. Technical specifications The electric cabinet operates at ambient temperature from 10 to 35 ° C and relative humidity up to 80% at 25 ° C Operating temperature- 500 ⁰C Power consumption - 5000 watts Dimensions of the working chamber-Ø430x430 mm Dimensions WxDxH- 680x990x620 mm Weight - 95* kg (* - mass with microprocessor unit and pump)

The operating temperature range is +15...+25 °C. Nine workplaces for the placement of electrical resistance measures. Stability and uniformity of temperature in the working bath is not worse than ± 0.05 ° C Bath volume 40 l Overall dimensions 730x440x600 mm Bath depth 210 mm Weight 38 kg Power consumption 2.2 kW

designation - SNOL-F-120/350-I2 volume,l - 120 temperature,oS - 350 Supply voltage, V - 220±10%+PE

Receiving and transmitting modules for electrical communication lines in SFP metal enclosures with separate optical input/output for an RJ-45 type electrical connector for data transmission over a category 5 twisted pair.