Search

It is designed to maintain a set temperature of a liquid coolant circulating both in an internal bath and in external closed-type consumers. Feed pump for external closed-type thermostating systems. All-metal stamped tub with a volume of 4 liters and a depth of 150 mm. The stability and uniformity of the temperature in the inner bath is not worse than ± 0.1 ° C. The operating temperature range is +20...+200 °C. Bath volume 4 l Overall dimensions 185x410x430 mm The open part of the bath is 120x55 mm Bath depth 150 mm Weight 11 kg Power consumption 2.2 kW

The LOIP LT-112b modification device consists of an immersion thermostat-circulator LOIP LT-100 and a working bath with a lean-to hinged lid. Technical specifications: Temperature range: without external cooling, °C Current+10 ... +100 with tap water cooling °C Water+5 ... +100 Accuracy of temperature maintenance, °C ± 0.1 The error of setting the set temperature, no more than ° C ± 0.2 Heater power, W 1900 Pump: max. flow rate, l/min 7.5 pressure, bar 0.17 Bath volume, l 12 The working fluid is water, water-glycerin mixture. Open part of the bath / depth, mm 190x296/150 Overall dimensions, mm 355x335x370 Weight, kg 10.2

Table top to the island table on the support tables Material: LAMINATE Length, mm: 1200 Depth, mm: 1500

Furniture for laboratory work. Table-sink LAB-M MO 80.65.90 T6V Width, mm: 800 Depth, mm: 650 Height, mm: 900 equipment: Table top – TRESPA TopLabPlus – monolithic slab of ultra-high pressing thickness of 6mm with a chemically resistant surface made of polyurethane-acrylic composition, on a substrate of wood-containing material (plywood 15mm or melamine 16mm), edged around the perimeter of PVC edge 2mm 1 built–in bowl - epoxy compound VITE. The location of the bowl in the center, fixing the bowl flush with the level of the countertop. Inner bowl size – 450*365*280 mm The base of the sink table is a support pedestal made of white melamine Facades – laminated MDF of white color with a thickness of 16 mm, dark gray ABS edging Without shelves

The kit is designed for staining micro-preparations on slides in research laboratories. Overall dimensions, mm - 145x145x70. Advantages of using: -the minimized working volume of the container reduces the volume of the dye (245-250 ml); - compactness of the product and low weight ensure ergonomics; - a hermetically sealed lid prevents the evaporation of methanol, which is part of the dye.

The muffle shaft furnace with digital control SSHOL-70/11 (hereinafter referred to as the "furnace") is designed for firing products, melting and heat treatment of metals. It can be used as a universal laboratory muffle furnace in metallurgical, ceramic, jewelry production, dental, chemical and food laboratories.

It will help relay protection and automation services, the chief power engineer of industrial enterprises and a wide range of specialists engaged in setting up, monitoring, diagnostics and operation of electrical installations to solve the following tasks: − record emergency waveforms on 4 current channels and 4 voltage channels, with data stored in COMTRADE format - take daily load schedules and carry out long−term monitoring of the parameters of the power grid (recorder) - to monitor the conduct of switching in switchgear − identify the causes of the emergency mode − to evaluate the correctness of the operation of the RSiA and PA devices − determine the harmonic composition of current and voltage (up to and including the 14th harmonic) − control phase alternation − remove the voltage characteristics − measure the phase shift angle and perform the construction of vector diagrams of voltage and current − control the circuits in the SHPT − check the integrity of electrical conductors (ringing) − carry out maintenance of relay protection circuits and power circuits of electrical installations − monitor the status and diagnostics of DC circuits

It is designed to control the excess pressure during the crimping of pipelines before putting them into operation, as well as during scheduled system health checks. The devices are registered in the State Register of Measuring Instruments for No. 30414-11, No. 43646-10 and are approved for use in the Russian Federation. Features of the CHU-N kit Carrying out pressure testing before the start of commissioning allows you to identify possible defects in seams and pipes, ensuring their tightness and reliability of insulation. The kit is designed to work in the field in order to record and archive the measured results to identify possible defects. The CHU-M kit is a portable complex with autonomous power supply.

Tubes without fillers are used for the study of blood serum in biochemical, immunological and serological tests. Material for research............... blood serum Scope of application............................ blood serum research in biochemistry, immunology, serology Centrifugation................................ 1000 - 1500 g - 10 minutes

The material of the working surface is monolithic, water-resistant, chemical resistant laboratory plastic (Lab HPL). One-piece sink (without welds) made of AISI 304 stainless steel (analog of Russian 08X18N10T and 12X18N10T). The sink is installed below the level of the work surface for ease of operation. 1.LK-600 SMS (1 sink, 1 mixer) Width - 600 CHIPBOARD- 42 280 ₽ 2. LK-900 SMS (1 sink, 1 mixer) Width - 900 CHIPBOARD - 46 730 ₽ 3. LK-1200 SMS (1 sink, 1 mixer) Width - 1200 CHIPBOARD - 55 690 ₽ 4. LK-1200 SMS (2 sinks, 1 mixer) Width - 1200 CHIPBOARD - 76 450 ₽ 5. LK-1500 SMS (1 sink, 1 mixer) Width - 1500 Chipboard- 62 160 ₽ 6. LK-1500 SMS (2 sinks, 1 mixer) Width - 1500 CHIPBOARD - 80 700 ₽

It is intended for thermostating samples in glasses, flasks and other laboratory utensils in cases when high accuracy of temperature maintenance is not required and good uniformity of the temperature field in the working volume is not needed. The operating temperature range is Current +5...+200 °C. Four workstations with a diameter of 110 mm with five steel O-rings, tripods and feet with a clip. Stamped steel tub with a volume of 8 liters and a depth of 60 mm. Bath volume 8 l Overall dimensions 540x640x610 mm The open part of the bath is 325x290 mm Bath depth 60 mm Weight 10 kg Power consumption 2.5 kW

Designed for use in the Kjeldahl apparatus used to determine nitrogen. Variants: 2-250-26 TS 2-100-22 TU 9464-019-29508133-2015, TS 2-1000-34 TU 9464-019-29508133-2015, TS 2-250-34 TU 9464-019-29508133-2015, TS 2-500-34 TS TU 9464-019-29508133-2015