The tripod is made of aluminum, which allows them to be sterilized at any temperature; this material provides lightness and durability. It can be used in water baths. The tripod has an individual packaging. Designed for storing test tubes.

MiniMed

Suponevo

general laboratory

equipment

tripod

Bryansk region

Produced in: Bryansk region

Tripod for test tubes LA-208

Number of sockets, pcs 15 Hole diameter, mm 22 Immersion depth, mm 200 Overall dimensions (WxDxH), mm 180x80x215

Saint Petersburg

Produced in: Saint Petersburg

Metal tripod Sh-10/43, pack of 5 pcs, MiniMedProm

from 387 ₽

Suponevo

Produced in: Bryansk region

Metal tripod Sh-25/23, pack of 10 pcs, MiniMedProm

from 660 ₽

Suponevo

Produced in: Bryansk region

Set of devices VIS-T-06-9K

The set of devices is designed for installation in a vertical position of nine working viscometers in the bath of the VIS T 06 liquid thermostat when they are verified.

Tomsk

Produced in: Tomsk

A height-adjustable pallet collects coolant droplets. The collapsible design provides compact storage and quick assembly as needed. Overall dimensions 355x200x405 mm Weight 1.9 kg

Tomsk

Produced in: Tomsk

Set of devices VIS-T-06-5K

The set of devices is designed to install five working viscometers in a vertical position in the bath of the VIS T 06 liquid thermostat when they are verified.

Tomsk

Produced in: Tomsk

Tripod "workplace" for single and stripped 0.2 ml tubes, 96 seats

from 2 100 ₽

Tripod "workplace" for single and stripped 0.2 ml tubes, 96 seats

Berdsk

Produced in: Berdsk, Novosibirsk region

Tripod for test tubes LA-203

Number of sockets, pcs 33 Hole diameter, mm 17 Immersion depth, mm 200 Overall dimensions (WxDxH), mm 235x80x215

Saint Petersburg

Produced in: Saint Petersburg

Metal tripod SHMB-40/18, pack. 4 pcs, MiniMedProm

from 702 ₽

The microbiological tripod is designed to obtain a beveled surface of agarized media and cultures of aerobic and anaerobic organisms. A tripod with 40 test tubes can be installed at an angle of 5 or 20 degrees.

Suponevo

Produced in: Bryansk region

Metal tripod Sh-10/30 K, pack.15 pcs, MiniMedProm

from 525 ₽

Suponevo

Produced in: Bryansk region

Tripod for test tubes LA-207

Number of sockets, pcs 21 Hole diameter, mm 17 Immersion depth, mm 200 Overall dimensions (WxDxH), mm 180x80x215

Saint Petersburg

Produced in: Saint Petersburg

A PCR tablet for 96 wells of 0.1 ml.

from 100 ₽

96-hole PCR tablet, natural, thin-walled, low-profile. Due to the low-profile design of the PCR reagent, less space is available for the transition to the gas phase during heating, which reduces the accumulation on the walls of the tubes. Thus, stable reaction conditions are maintained, and a more efficient reaction is achieved. The presence of a skirt — Without a skirt Material — Polypropylene The wall thickness is 0.3-0.35 mm. Color — Natural Profile: Low

Berdsk

Produced in: Berdsk, Novosibirsk region

Tripod frame DPS-20, pack.50 pcs, n/a,

from 215 ₽

The tripod–frame DPS–20 is designed for painting preparations on slides in research laboratories. Designed for 20 slides. It has a convenient handle.

Suponevo

Produced in: Bryansk region

Set of devices VIS-T-11-K

It is designed for installation of two working viscometers in the VIS T 11 liquid thermostat when they are verified or when determining the viscosity of petroleum products in accordance with GOST 33.

Tomsk

Produced in: Tomsk

May be interested in

Device for lifting and lowering samples LA-220

Designed for immersion of objects in the baths of LOIP LT thermostats and LOIP LB-200 precision thermostatic baths to a predetermined depth. Thermostatable objects are placed on a movable pallet, which can be fixed at any required depth. The device is installed on the casing of thermostats and precision thermostatic baths instead of a hinged lid and is equipped with its own removable lid. Bath volume, l 17 and 24 Pallet size, mm 260x320 Maximum immersion depth, mm 200

LOIP

Saint Petersburg

general laboratory

specimen lifting-lowering device

Saint Petersburg

accessories

Produced in: Saint Petersburg

Set of devices for CRYO-VIS-T-06 the State Standard 20287 method B

It is used in determining the pour point of petroleum products in accordance with the State Standard 20287 (method B).

Tomsk

Produced in: Tomsk

Bracket for mounting the AE-4/AE-5 disstillator on the wall

from 3 600 ₽

The bracket for mounting the distiller provides the possibility of not only desktop, but also wall-mounted installation of the aquadistillator at the required height.

Belgorod

Produced in: Belgorod

Replacement O-rings for ISO-F flange connections

Kazan

Produced in: Kazan

Discs with high sealing capacity for SVB connections (aluminum) for ISO-F flanges

Kazan

Produced in: Kazan

Set of devices GOST 11851 method A

It is intended for placement in the BF bath and is used in determining the mass fraction of paraffins in oil in accordance with the method A of the State Standard 11851.

Tomsk

Produced in: Tomsk

The height-adjustable bottom allows the tubes to be immersed in the coolant to the required depth. Overall dimensions 515x310x215 mm Weight 2.8 kg

Tomsk

Produced in: Tomsk

Transitional centering rings (aluminum / stainless steel) with O-ring of circular cross-section

The ISO-KF connection (DIN 28 403 and ISO 2861) allows quick installation and replacement of components in vacuum systems. The connection consists of two symmetrical ISO-KF flanges (1), a centering ring with an O-ring seal (2) and a quick-release clamp (3). High-vacuum ISO-KF connections can be mounted without using a tool by simply turning the nut of the quick-release clamp.

Kazan

Produced in: Kazan

ISO-F flanges with a side and a locking ring for clamping flange connections (steel)

Kazan

Produced in: Kazan

Tripod for test tubes LA-208

Number of sockets, pcs 15 Hole diameter, mm 22 Immersion depth, mm 200 Overall dimensions (WxDxH), mm 180x80x215

Saint Petersburg

Produced in: Saint Petersburg

Heating element for a 3.5 kW 220 V distiller

from 1 860 ₽

The tank for the 3.5 kW aquadistillator is made of stainless steel.

Belgorod

Produced in: Belgorod

A set of BNTI devices-05-04- 4K

It is intended for placing vessels with samples in the working baths of the BNTI 05 04 bath when determining the low-temperature properties of petroleum products, if appropriate test vessels are available. Suitable for placing vessels with samples for the State Standard 20287 (Method A), EN 23015 or ASTM D97.

Tomsk

Produced in: Tomsk

Set of VT18-K devices

The set of devices is designed to accommodate thermostatically controlled objects in the inner bath of the VT18 or VT18-2 liquid thermostat when they are immersed to a depth of 40 or 70 mm from the bottom of the inner bath. Overall dimensions 350x260x70 mm Weight 2.1 kg

Tomsk

Produced in: Tomsk

A set of CRYO-T devices-05-01- K

It is used in determining the low-temperature characteristics of petroleum products and organic chemical products in accordance with the State Standard 5066 (Method B) and GOST 18995.5.

Tomsk

Produced in: Tomsk

ConFlat (CF) standard connections are used to ensure the connection of components of vacuum systems operating in the field of high and ultra-high vacuum.

Kazan

Produced in: Kazan