Equipment

The software and measurement complex includes a set of sensors and is intended for use as a demonstration material, setting up an experiment. The complex consists of a set of sensors and a software package. The measurement results are displayed in the form of graphs and digital values on the PC screen. The sensors are designed to work together with a PC via a USB 2.0 interface, running software compatible with Microsoft Windows 10 PRO. The software and measurement complex includes a set of sensors and is intended for use as a demonstration material, setting up an experiment. The complex consists of a set of sensors and a software package. The measurement results are displayed in the form of graphs and digital values on the PC screen. The sensors are designed to work together with a PC via a USB 2.0 interface, running software compatible with Microsoft Windows 10 PRO. The complex is accompanied by: - product passport; - instruction manual; - an inventory of investments. The warranty period for the product is at least 24 months.

The LP-250 flow-through water trap is installed on the inlet flange of the diffusion pump and is designed to reduce the flow of working fluid vapors into the pumped volume by condensing them on the cooled elements of the freezing device.

The use of a 2VVN2-50(H) water-ring vacuum pump for pumping out water-gas mixtures is allowed only if the bulk of the water is separated and discharged at the pump entrance. Failure to comply with this requirement may lead to unacceptable overload of the electric motor and destruction of the working parts of the 2VVN2-50(H) pump. The 2VVN2-50(H) vacuum water ring pump is manufactured in the climatic version of UHL 4 and O4 (i.e. for moderate and cold climate) according to GOST standard 15150-69, meets the requirements of technical specifications TU 3648-015-00218526-2000, designed and manufactured taking into account the requirements of GOST R 52615-2006. The quality of electricity must meet the requrimemnts of GOST 32144-2013.

The electric furnace is designed for various thermal processes of annealing, degassing, sintering and other processes in vacuum at temperatures up to 1600 ° C and small gas emissions, in which there is no interaction of the residual gas medium with heater materials, screen insulation and other structural elements.

Vibration electrodynamic testing installations of the VEDS series are designed for testing products for the effects of single-component harmonic vibration in the vertical direction and tests for vibration strength and resistance

Designed to measure the insulation resistance of electrical circuits that are not under voltage, in the range from 10 kOhm to 100 Gom. Technical specifications: Ranges: 10kOhm–100gohm Measurement error: ±(1.5–2.5)% Test voltage: 2500 V 3 digit digital indicator Built-in battery Dimensions, weight: 150x170x200 mm, 4 kg Power supply: ~110, ~220, 15 VA, 12V battery Operating temperature: -20 °C – +50 °C

Designation: SNO-8.16.8 Temperature: 1200 Open.doors: electromechanical Camera size (w.G.V.):600x1200x400 Regulation zones: 1

The flame spectrometer is designed for rapid determination of a wide range of concentrations (up to 8 orders of magnitude) of sodium, lithium, potassium, calcium, barium, caesium, rubidium in technological solutions. The excitation of atoms occurs in an air-acetylene flame. The device consists of a three-slit burner with flame control, a pneumatic sprayer, a spray chamber, an optical radiation input system into the "Hummingbird-2" spectrometer and an automatic air and acetylene supply system, with the possibility to control and adjust gas flow. The use of a three-slit burner provides increased flame temperature over the central slit of the burner due to the external flame layers. This makes it possible to determine low concentrations of calcium and barium. At the same time, it remains the possibility to determine impurities in highly concentrated solutions without clogging the burner slots. The lighting system of the spectrometer is mirror-lens, thanks to this, radiation collected from both sides of the burner is introduced into the polychromator.

The "10GBASE-SR SFP+ Module" optical modules are capable of operating at a data transfer rate of up to 10 Gbit/s and are used in fiber-optic communication systems. They have a form factor similar to the previous SFP standard, namely, they have much smaller dimensions compared to other 10G transceivers. They can be installed on network equipment with a large number of ports.

Technical specifications: Temperature range, °C without external cooling (Current+10)...+100 with tap water cooling (Tvody+5)...+100 Accuracy of temperature maintenance, not more than, ° C ± 0.1 Power consumption, max., W 2200 Power supply 220±20 V, 50 Hz Working fluid water, water-glycerin mixture Dimensions of the working part of the bath / depth, mm 360x296 / 200 Overall dimensions, mm 532x335x400 Bath volume, l 24 Weight, kg 15.7

Atomic Emission Complex "Grand Stream" is designed for rapid determination of the composition of powder samples of natural and industrial origin, includes a "Grand" spectrometer, a "Stream" installation and auxiliary equipment for sample preparation.