Catalog
Back to search results
NV-1200 SHV-U Fume cupboard with plumbing and countertop made of granite tiles
Back to search results
NV-1200 SHV-U Fume cupboard with plumbing and countertop made of granite tiles
from
48 282 ₽
from
48 282 ₽
Go to the manufacturer's website
The Kors NV-1200 SHV-U laboratory fume hood is a single—frame cabinet with a ceramic granite countertop 1100 mm wide and a small built-in polypropylene sink.
External dimensions of the cabinet (W×D×H): 1100×700×1960 mm.
Dimensions of the working area (W×D×H): 1068×540×750 mm.
Table top: granite tiles.
Reliable fume cupboard for laboratories
The cabinet is available in two versions: with a hood from the lower cabinet and without it. In a cabinet with a hood, various aggressive reagents can be stored, in a cabinet without a hood, it is better to store only laboratory glass or instruments.
Working surface material: porcelain tile. It is moisture-resistant and perfectly withstands high temperatures. It is resistant to prolonged exposure to concentrated acids, alkalis and organic solvents. Limited resistance to hydrofluoric acid. This is one of the most popular types of countertops for laboratory furniture.
The small sink-drain is made of polypropylene, resistant to aggressive chemicals. Its diameter is 135 mm and its depth is 110 mm.
The base of the cabinet is made on an all-welded metal frame in powder coating. The side laminated panels (chipboard 16 mm thick) are edged on the facade with a durable PVC edge 2 mm thick, which increases their impact resistance and mechanical strength.
The cabinet legs are adjustable in height within two centimeters, allowing you to place the cabinet even on a fairly uneven floor.
Working area of the fume cupboard
The working area is closed by one lifting frame with a counterweight. It has two exhaust zones: the hood of the exhaust box and the level of the countertop. Diameter of the flange for connection to the ventilation system: 150 mm.
Working area size (W×D×H): 1068×540×750 mm. Please note that the cabinet narrows upwards. At a height of 50 cm, the depth of the working area will be 410 mm, at a height of 70 cm: 365 mm. If you need to place high equipment, then make sure that it is small enough in length, otherwise you will not be able to close the cabinet.
The working area is illuminated by a fluorescent lamp (included in the package). The switch is located on the right side of the cabinet, next to the sockets.
The fume cupboard is equipped with two sockets, one of them with grounding. Sockets have the IP20 degree of protection, maximum load: 1.5 kW.
What are the other options?
If you need to place large equipment, you may be interested in the cabinets for muffle furnaces. Also in the line there are large cabinets with plumbing fixtures: NV-1500 NV-U and two-frame NV-1500 SHV-U and NV-1800 SHV-U.
External dimensions of the cabinet (W×D×H): 1100×700×1960 mm.
Dimensions of the working area (W×D×H): 1068×540×750 mm.
Table top: granite tiles.
Reliable fume cupboard for laboratories
The cabinet is available in two versions: with a hood from the lower cabinet and without it. In a cabinet with a hood, various aggressive reagents can be stored, in a cabinet without a hood, it is better to store only laboratory glass or instruments.
Working surface material: porcelain tile. It is moisture-resistant and perfectly withstands high temperatures. It is resistant to prolonged exposure to concentrated acids, alkalis and organic solvents. Limited resistance to hydrofluoric acid. This is one of the most popular types of countertops for laboratory furniture.
The small sink-drain is made of polypropylene, resistant to aggressive chemicals. Its diameter is 135 mm and its depth is 110 mm.
The base of the cabinet is made on an all-welded metal frame in powder coating. The side laminated panels (chipboard 16 mm thick) are edged on the facade with a durable PVC edge 2 mm thick, which increases their impact resistance and mechanical strength.
The cabinet legs are adjustable in height within two centimeters, allowing you to place the cabinet even on a fairly uneven floor.
Working area of the fume cupboard
The working area is closed by one lifting frame with a counterweight. It has two exhaust zones: the hood of the exhaust box and the level of the countertop. Diameter of the flange for connection to the ventilation system: 150 mm.
Working area size (W×D×H): 1068×540×750 mm. Please note that the cabinet narrows upwards. At a height of 50 cm, the depth of the working area will be 410 mm, at a height of 70 cm: 365 mm. If you need to place high equipment, then make sure that it is small enough in length, otherwise you will not be able to close the cabinet.
The working area is illuminated by a fluorescent lamp (included in the package). The switch is located on the right side of the cabinet, next to the sockets.
The fume cupboard is equipped with two sockets, one of them with grounding. Sockets have the IP20 degree of protection, maximum load: 1.5 kW.
What are the other options?
If you need to place large equipment, you may be interested in the cabinets for muffle furnaces. Also in the line there are large cabinets with plumbing fixtures: NV-1500 NV-U and two-frame NV-1500 SHV-U and NV-1800 SHV-U.
Exhaust cabinet for working with acids LAB-PRO SHVK 150.84.230 VI
BASIC EQUIPMENT:
Working box
front guide posts – aluminum profile painted with powder paint (RAL 7035/RAL 5023), in the right rack there are a light switch and 2 splash–proof sockets with a 3.2kW cover (IP54)
the front anti-spill side is acid-resistant polished stainless steel. AISI 316 steel
rear, upper, side panels – metal painted with powder paint (RAL 7035) with the texture of shagreen leather
inner capsule made of polypropylene lined with ceramic plates of the rear and side panels to a height of 380mm
2 dependent lifting screens – tempered glass in aluminum frames, lifting 0-780mm, do not change the dimensions of the cabinet when lifting
the upper fixed screen – polypropylene
on the top panel:
LED dust– and moisture-proof lamp 2x22 W (IP65) is separated from the workspace by tempered glass with a thickness of 4mm
flange d=250mm (distance from the back panel to the center of the flange - 170mm)
switching box with automatic emergency power off 16A
3 exhaust levels
easily removable exhaust visors
counterweights are placed in the front pylon racks and are easily serviced
Frame base
collapsible frame made of rectangular metal profile painted with powder paint (RAL 7035) with the texture of shagreen leather
service panel - aluminum profile painted with powder paint (RAL 5023) with the texture of shagreen leather
adjustable supports
LOIP
Saint Petersburg
Produced in: Saint Petersburg
General purpose exhaust cabinet LAB-PRO SHV 120.74.230 SS
BASIC EQUIPMENT
Working box
guide racks – aluminum profile painted with powder paint (RAL 7035/RAL 5023)in the right rack there are a light switch and 2 splash–proof sockets with a 3.2kW cover (IP54)
the front anti-spill side is acid-resistant polished stainless steel AISI 304
side panels – tempered glass
2 dependent lifting screens – tempered glass in aluminum frames, lifting 0-780mm, do not change the dimensions of the cabinet when lifting
the upper fixed screen – metal painted with powder paint (RAL 5023) with the texture of shagreen leather
on the top panel:
LED lamp dust- and moisture-proof (10W IP65)
switching box with automatic emergency power off 16A
flange d=250mm (the distance from the back panel to the center of the flange is 170mm)
easily removable exhaust canopies
3 levels of exhaust (lower, side and front)
counterweights are placed in the front pylon racks and are easily serviced
by the rear and upper panels – polypropylene
Frame base
collapsible frame made of rectangular metal profile painted with powder paint (RAL 7035) with the texture of shagreen leather
service panel - metal box painted with powder paint (RAL 5023) with the texture of shagreen leather:
adjustable supports
LOIP
Saint Petersburg
Produced in: Saint Petersburg
NV-1200 SHV-B Fume cupboard with countertop made of granite tiles
from
44 257 ₽
Kors NV-1200 SHV-B laboratory fume hoods are single—frame cabinets with a width of 1100 mm with a countertop made of granite tiles.
External dimensions of the cabinet (W×D×H): 1100×700×1960 mm.
Dimensions of the working area (W×D×H): 1068×540×750 mm.
Table top: granite tiles.
Convenient fume cupboards for comfortable work in the laboratory
The cabinet is available in two versions: with a hood from the lower cabinet and without it. In a cabinet with a hood, various aggressive reagents can be stored, in a cabinet without a hood, it is better to store only laboratory glass or instruments.
Working surface material: porcelain tile. It is moisture-resistant, perfectly withstands high temperatures. It is resistant to prolonged exposure to concentrated acids, alkalis and organic solvents. It has limited resistance to hydrofluoric acid. This is one of the most popular choices for work surfaces, suitable for most laboratories. Drying cabinets or other highly heated appliances can be placed on such a countertop.
The working area is closed by a single lifting frame with a counterweight. It has two exhaust zones: the hood of the exhaust box and the level of the countertop. Diameter of the flange for connection to the ventilation system: 150 mm.
Working area size (W×D×H): 1068×540×750 mm. Please note that the cabinet narrows upwards. At a height of 50 cm, the depth of the working area will be 410 mm, at a height of 70 cm: 365 mm. If you need to place high equipment, then make sure that it corresponds to the dimensions of the camera, otherwise you will not be able to close the cabinet.
The height of the raised glass above the cabinet: 510 mm, that is, with the glass raised, the total height of the cabinet will be 2470 mm.
The working area is illuminated by a fluorescent lamp (included in the package). The switch is located on the right side of the cabinet, next to the sockets.
The fume cupboard is equipped with two sockets, one of them with grounding. Sockets with IP20 degree of protection, maximum load: 1.5 kW.
The base of the cabinet is an all-welded metal frame in powder coating. The side laminated panels (chipboard with a thickness of 16 mm) are edged with a durable PVC edge with a thickness of 2 mm, which increases their impact resistance and mechanical strength.
The legs of the cabinet are adjustable in height within two centimeters, allowing you to place the cabinet even on a rather uneven floor.
NV LAB
Moscow
Produced in: Moscow, Moscow region
Exhaust cabinet for working with LVZH LAB-PRO SHVLVZH 150.74.230 KG
BASIC EQUIPMENT
Working box
the front guide posts are aluminum profile painted with powder paint (RAL 7035/RAL 5023), in the right rack there are a light switch and 2 splash–proof sockets with a 3.2kW cover (IP54)
the front anti-spill side is acid-resistant polished stainless steel. AISI 304 steel
rear, upper, side panels – metal painted with powder paint (RAL 7035) with the texture of shagreen leather
2 dependent lifting screens – tempered glass in aluminum frames, lifting 0-780mm, do not change the dimensions of the cabinet when lifting
the upper fixed screen – tempered glass in an aluminum frame
on the top panel:
4 anti-explosion the valve
lamp LED dust– and moisture-proof (2X10W IP65) is separated from the working space by tempered glass with a thickness of 4mm
flange d=250mm (the distance from the back panel to the center of the flange is 170mm)
switching box with automatic emergency power off 16A
easily removable exhaust visors
3 exhaust levels
on the rear panel:
4 holes d =22mm with plugs made of stainless steel for the installation of additional pipes or taps
technological hole d=50mm with a plastic plug
counterweights are placed in the front pillars-pylons and are easily serviced
Frame base
metal frame with a pedestal, painted with powder paint (RAL 7035) with a texture of shagreen leather:
double metal facades with a noise damper, opening angle 270°
handles – polypropylene
2 compartments with locks
1 shelf with the possibility of installation on three levels in any of the compartments
flange d=100mm
service panel – metal box painted with powder paint (RAL 5023) with the texture of shagreen leather:
adjustable supports
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Exhaust cabinet for organic synthesis LAB-PRO SHVOS 180.84.230 TR
BASIC EQUIPMENT
Working box
front guide posts – aluminum profile painted with powder paint (RAL 7035/RAL 5023), in the right rack there is a light switch and 2 splash–proof sockets with a 3.2kW cover (IP54)
the front anti-spill side is acid-resistant polished stainless steel. AISI 304 steel
rear, upper, side panels – metal painted with powder paint (RAL 7035) with the texture of shagreen leather
the inner surfaces of the working box are lined with chemically resistant HPL plastic
2 dependent lifting screens – tempered glass in aluminum frames, lifting 0-780mm, do not change the dimensions of the cabinet when lifting
the upper fixed screen – tempered glass in an aluminum frame
on the top panel:
LED dust- and moisture-proof lamp (2X22W IP65) is separated from the workspace by tempered glass thickness of 4mm
flange d=250mm (distance from the back panel to flange center – 170mm)
easily removable exhaust canopies
3 exhaust levels
on the left side panel service module with cold water supply pipe and wall-mounted drain sink made of polypropylene
cold water supply valve in the left rack of the box
counterweights are placed in the front racks-pylons and are easily serviced
Frame base
collapsible frame made of rectangular metal profile painted with powder paint (RAL 7035) with the texture of shagreen leather
service panel - aluminum profile painted with powder paint (RAL 7035/RAL 5023) with the texture of shagreen leather
adjustable supports
module with two drawers
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Exhaust cabinet LAB-1200 ballscrews
Working surface: Porcelain stoneware (ceramic tile 300*300mm)
Length, mm: 1232
Depth, mm: 925
Height, mm: 2100
equipment
Working box
the side and back panels are lined with a row of ceramic tiles to a height of 400mm
the case is melamine with a thickness of 16mm
lifting screen with the possibility of fixing at any height – organic acrylic glass with a thickness of 8mm, lifting 0–750mm, increases the height of the cabinet with a full lift by 430mm
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Exhaust cabinet for washing dishes LAB-PRO SHVM 150.74.230 TR
BASIC EQUIPMENT
Working box
guide posts – aluminum profile painted with powder paint (RAL 7035/RAL 5023) in the right rack there is a light switch
front anti–spill side - acid-resistant polished stainless steel AISI 304
side panels – tempered glass
2 dependent lifting screens – tempered glass in aluminum frames, lifting 0-780mm, do not change the dimensions of the cabinet when lifting
the upper fixed screen – metal painted with powder paint (RAL 5023) with the texture of shagreen leather
back and top panels – polypropylene
on the top panel:
LED lamp dust- and moisture-proof 10W IP65
switching box with automatic emergency shutdown power supply 16A
flange d=250mm (the distance from the back panel to the center of the flange is 170mm)
easily removable exhaust canopies
3 exhaust levels (lower, side and front)
counterweights are placed in the front pylon racks and are easily serviced
Frame base
metal pedestal painted with powder paint (RAL 7035) with the texture of shagreen leather
facades – laminated MDF with a thickness of 16mm
handles – polypropylene
2 compartments with locks
1 shelf with the possibility of installation on three levels in any of the compartments (when the cabinet is equipped with 2 bowls, shelves are not included)
flange d=100mm
service panel – aluminum profile painted with powder paint (RAL 5023) with the texture of shagreen leather:
adjustable supports
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Exhaust cabinet LAB-M SHV ME 180.74.210 F20
Furniture for laboratory work.
All-metal exhaust cabinet
Working surface: FRIDURIT (20 mm)
Overall dimensions:
Length, mm: 1800
Depth, mm: 740
Height, mm: 2100
equipment
Working box
anti–spill side – acid–resistant polished stainless steel AISI 316
housing - metal painted with white powder paint (RAL 9016)
guide posts – aluminum profile painted with dark gray powder paint (RAL 7011)
2 dependent lifting screens - tempered glass in aluminum frames, lifting 0-710mm, not change the dimensions of the cabinet when lifting.
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Exhaust cabinet for muffle furnaces Mod. -1500 SHVMP
from
131 472 ₽
The side, back walls and top are made of sheet metal. Automatic emergency power cut-off (16 A), two splash-proof sockets, a light-switch, an electrical box on the base panel's back. Flange to connect to exhaust system of ventilation (200 mm).
The cabinat's base is a relocatable reinforced frame made of steel shaped tube on adjustable bearings.
The exhaust box and the cabinet's base are painted with high-quality powder polymer paint, that protects the cabinet from the external effects of aggressive vapors, mechanical damage and high temperatures.
Additionally, the cabinet can be equipped with a metal box for other supplementary equipment storage, consumables, tools.
PK "Sovremennaya Laboratoriya"
Saint Petersburg
Produced in: Saint Petersburg
Fume Umbrella-Cupboard SHZV-NRZH.180
Overall dimensions 1800x800x1905 mm
Internal dimensions 1750x775x950 mm
The diameter of the exhaust pipe is 200 mm
Weight 165 kg
Termeks
Tomsk
Produced in: Tomsk
General purpose exhaust cabinet LAB-PRO SHV 180.74.230 SS
BASIC EQUIPMENT
Working box
guide racks – aluminum profile painted with powder paint (RAL 7035/RAL 5023)in the right rack there are a light switch and 2 splash-proof sockets with a 3.2kW cover (IP54)
the front anti–spill side is acid-resistant polished stainless steel AISI 304
side panels – tempered glass
2 dependent lifting screens – tempered glass in aluminum frames, lifting 0-780mm, do not change the dimensions of the cabinet when lifting
the upper fixed screen – metal painted with powder paint (RAL 5023) with the texture of shagreen leather
on the top panel:
LED lamp dust- and moisture-proof (22W IP65)
switching box with automatic emergency power off 16A
flange d=250mm (the distance from the back panel to the center of the flange is 170mm)
easily removable exhaust canopies
3 levels of exhaust (lower, side and front)
counterweights are placed in the front pillars-pylons and are easily serviced
by the rear and upper panels – polypropylene
The frame base
is a collapsible frame made of a rectangular metal profile painted with powder paint (RAL 7035) with the texture of shagreen leather
service panel is a metal box painted with powder paint (RAL 5023) with the texture of shagreen leather:
adjustable supports.
LOIP
Saint Petersburg
Produced in: Saint Petersburg
General purpose exhaust cabinet LAB-PRO SHV 180.74.230 KG
BASIC EQUIPMENT
Working box
guide posts – aluminum profile painted with powder paint (RAL 7035/RAL 5023)in the right rack there are a light switch and 2 splash-proof sockets with a 3.2kW cover (IP54)
the front anti–spill side is acid-resistant polished stainless steel AISI 304
side panels – tempered glass
2 dependent lifting screens – tempered glass in aluminum frames, lifting 0-780mm, do not change the dimensions of the cabinet when lifting
the upper fixed screen – metal painted with powder paint (RAL 5023) with the texture of shagreen leather
back and top panels –
polypropylene LED lamp dust- and moisture-proof (22W IP65)
switching box with automatic emergency power off 16A
flange d=250mm (the distance from the back panel to the center of the flange is 170mm)
easily removable exhaust visors
3 exhaust levels (lower, side and front)
counterweights are placed in the front pylon racks and are easily serviced
The frame base
is a collapsible frame made of a rectangular metal profile painted with powder paint (RAL 7035) with the texture of shagreen leather
service panel is a metal box painted with powder paint (RAL 5023) with the texture of shagreen leather:
adjustable supports.
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Exhaust cabinet floor metal LAB-PRO SHVN-ME 150.96.255
BASIC EQUIPMENT
guide racks – aluminum profile painted with powder paint (RAL 7035/ RAL 5023) in the right rack there are a light switch and 3 splash-proof sockets with a 3.2kW cover (IP54)
in the left rack there are a water valve and a nitrogen
valve, rear, upper, side panels - metal painted with powder paint (RAL 7035)
with the texture of shagreen leather
bottom – corrugated aluminum sheet 3mm
3 dependent lifting screens – tempered glass in aluminum profile frames, lifting 0-1800mm, do not change the dimensions of the cabinet when lifting, the middle and upper screens are equipped with sliding glass doors made of tempered glass with a thickness of 4mm
upper fixed screen – metal, powder-painted paint (RAL 7035) with the texture of shagreen leather in the upper part and tempered glass in the lower part in an aluminum profile frame
on the upper panel:
LED lamp dust– and moisture-proof (2x22 W IP65)
flange d=250mm (distance from the back panel to the center of the flange - 155mm)
switching box with automatic emergency power off 16A
3 extraction levels
technological opening d =50mm with a plug and outlet at the bottom of the right sidewall and right rear rack
counterweights are placed in the front pylon racks and are easily serviced
on the left side panel service module with cold water and nitrogen supply pipes on the service panel there is a wall-mounted drain sink made of polypropylene.
(ext. size 250*100*150mm)
pipe d/water
pipe d/nitrogen
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Exhaust cabinet with integrated glass-ceramic hob LAB-PRO SHVVP 120.84.230 VI
BASIC EQUIPMENT
Working box
front guide posts – aluminum profile painted with powder paint (RAL 7035/RAL 5023), in the right rack there are a light switch and 2 splash–proof sockets with a 3.2kW cover (IP54)
the front anti-spill side is acid-resistant polished stainless steel. steel (AISI 316)
rear, upper, side panels – metal painted with powder paint (RAL 7035) with the texture of shagreen leather
inner capsule made of polypropylene lined with ceramic plates of the rear and side panels to a height of 380mm
2 dependent lifting screens – tempered glass in aluminum frames, lifting 0-780mm, do not change the dimensions of the cabinet when lifting
the upper fixed screen – polypropylene
on the upper panel:
LED lamp dust- and moisture-proof 2x10 W (IP65) is separated from the workspace by tempered glass with a thickness of 4mm
flange d=250mm (distance from the back panel to the center of the flange – 170mm)
switching box with automatic emergency power off 16A
3 exhaust levels
easily removable exhaust canopies
the glass ceramic heating platform is located in the center of the countertop
size 640*500mm (working area 580*430mm, 2 independent heating zones)
power up to 5.7kW
heating up
to 400 ° C counterweights are placed in the front pylon racks and are easily serviced
Frame base
collapsible frame made of rectangular metal profile painted with powder paint (RAL 7035) with the texture of shagreen leather
service panel - aluminum profile painted with powder paint (RAL 5023) with the texture of shagreen leather
adjustable supports.
LOIP
Saint Petersburg
Produced in: Saint Petersburg
FUME HOOD FOR MUFFLE FURNACES
from
92 910 ₽
The SHVM fume hood is designed for the installation of muffle furnaces and drying cabinets. It can be equipped with cabinets made of steel.
1. LC-900 SHVM
Width - 960
GRANTEC - 72 550 ₽
2. LC-900 SHVM with protective screen
Width - 960
GRANTEC - 88 910 ₽
3. LC-1200 SHVM
Width - 1260
GRANTEC - 83 860 ₽
4. LC-1200 SHVM with protective screen
Width - 1260
GRANTEC - 100 390 ₽
5. LC-1500 SHVM
Width - 1560
GRANTEC - 95 270 ₽
6. LC-1500 SHVM with protective screen
Width - 1560
GRANTEC - 107 690 ₽
SpetsBaltMebel
г. Санкт- Петербург
Produced in: Saint Petersburg
Exhaust cabinet for working with LVZH LAB-PRO SHVLVZH 180.74.230 KG
BASIC EQUIPMENT
Working box
front guide posts – aluminum profile painted with powder paint (RAL 7035/RAL 5023), in the right rack there are a light switch and 2 splash–proof sockets with a 3.2kW cover (IP54)
the front anti-spill side is acid-resistant polished stainless steel. AISI 304 steel
rear, upper, side panels – metal painted with powder paint (RAL 7035) with the texture of shagreen leather
2 dependent lifting screens – tempered glass in aluminum frames, lifting 0-780mm, do not change the dimensions of the cabinet when lifting
the upper fixed screen – tempered glass in an aluminum frame
on the top panel:
4 anti-explosion the valve
lamp LED dust– and moisture-proof (2X10W IP65) is separated from the working space by tempered glass with a thickness of 4mm
flange d=250mm (the distance from the back panel to the center of the flange is 170mm)
switching box with automatic emergency power off 16A
easily removable exhaust visors
3 levels of exhaust
on the rear panel:
4 holes d =22mm with plugs made of stainless steel for installing additional pipes or taps
technological hole d=50mm with a plastic plug
counterweights are placed in the front pillars-pylons and are easily serviced
Frame base
metal frame with a pedestal, painted with powder paint (RAL 7035) with a texture of shagreen leather:
double metal facades with a noise damper, opening angle 270°
handles – polypropylene
4 compartments with locks
2 shelves with the possibility of installation on three levels in any of the compartments
2 flanges d=100mm
service panel – metal box painted with powder paint (RAL 5023) with the texture of shagreen leather:
adjustable supports
LOIP
Saint Petersburg
Produced in: Saint Petersburg
NV-1200 SHV-B-NERZH Fume cupboard with stainless steel countertop
from
75 052 ₽
Kors NV-1200 SHV-NERZH laboratory fume hoods are single—frame cabinets with a width of 1100 mm with a stainless steel countertop.
External dimensions of the cabinet (W×D×H): 1100×700×1960 mm.
Dimensions of the working area (W×D×H): 1068×540×750 mm.
Table top: stainless steel.
Convenient fume hoods for comfortable work in the laboratory
Working surface material: stainless steel. It is well suited for biological or medical laboratories, but it is better not to use it in chemical laboratories. It is resistant to prolonged exposure to temperature, organic solvents, and oils. It has limited resistance to short-term exposure to concentrated mineral acids and alkalis and is destroyed by prolonged exposure to concentrated acids.
The working area is closed by one lifting frame with a counterweight. It has two exhaust zones: the hood of the exhaust box and the level of the countertop. Diameter of the flange for connection to the ventilation system: 150 mm.
Working area size (W×D×H): 1068×540×750 mm. Please note that the cabinet narrows upwards. At a height of 50 cm, the depth of the working area will be 410 mm, at a height of 70 cm: 365 mm. If you need to place high equipment, then make sure that it corresponds to the dimensions of the camera, otherwise you will not be able to close the cabinet.
The height of the raised glass above the cabinet: 510 mm, that is, with the glass raised, the total height of the cabinet will be 2470 mm.
The working area is illuminated by an LED lamp (included in the package). The switch is located on the right side of the cabinet, next to the sockets.
The fume cupboard is equipped with two sockets, one of them with grounding. Sockets have the IP20 degree of protection, maximum load: 1.5 kW.
The base of the cabinet is an all-welded metal frame in powder coating. The side laminated panels (chipboard with a thickness of 16 mm) are edged with a durable PVC edge with a thickness of 2 mm, which increases their impact resistance and mechanical strength.
The cabinet legs are adjustable in height within two centimeters, allowing you to place the cabinet even on a rather uneven floor.
NV LAB
Moscow
Produced in: Moscow, Moscow region
NV-800 MO-B Wash table without dryer (800×600×850)
from
25 032 ₽
The NV-800 MO-B is a table with one stainless steel sink and no dryer. It is designed for standing work: its height is 85 cm.
Dimensions when assembled (W×D×H): 800×600×850 mm.
The overhead single sink is made of corrosion-resistant stainless steel. Dimensions of the sink (W×L×H): 400×400×180 mm. Drain diameter: 90 mm. The sink bowl is on the left-hand side. On the right-hand side there is a working surface.
The package includes a stainless steel mixer with flexible 300 mm flexible tap connectors and a siphon.
The side laminated panels of the table (chipboard 16 mm thick) are edged on the facade with a 2 mm PVC edge, which increases their impact resistance and mechanical strength.
The legs of the table are adjustable in height within two centimeters, allowing you to place it even on a rather uneven floor.
Advantages of NV-800 MO-B tables
A minimalistic compact model with a single stainless steel sink.
An inexpensive solution for laboratories that value the reliability and durability of furniture.
Its size makes it suitable for very small rooms.
Application of tables NV-800 MO-B
Tables of the NV series are used in laboratories of the widest profile: at food and light industry enterprises, in scientific and educational workshops, in chemistry classrooms, quality control centers, medical organizations and many others.
NV LAB
Moscow
Produced in: Moscow, Moscow region
Table island high LAB-PRO SOCv 150.150.90 TR
One-piece table top: TRESPA TopLabPlus 16 mm
Length, mm: 1500
Depth, mm: 1500
Height, mm: 900
BASIC EQUIPMENT
The base is a collapsible metal frame made of rectangular steel profile, painted with powder paint (RAL 7035) with the texture of shagreen leather
Four easily removable screens (RAL 7035) and two non-removable (RAL 5023)
Hidden fasteners
Adjustable supports (0-40 mm)
A set of end boxes-plugs
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Table top to the island table LAB-PRO RP 150.150 LA
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Wall-mounted high table LAB-PRO SPCv 150.80.90 TR-E16/23
BASIC EQUIPMENT
The base is a collapsible frame made of rectangular steel profile, painted with powder paint (RAL 7035) with the texture of shagreen leather
Hidden fasteners
Two easily removable rear screens (RAL 7035) and one non-removable (RAL 5023)
Rear side boxes
Adjustable supports (0-40 mm)
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Table-sink LAB-M MO 150.65.90 T6F
Furniture for laboratory work.
Table-sink LAB-M MO 150.65.90 T6F
Width, mm: 1500
Depth, mm: 650
Height, mm: 900
Equipment:
Table top – TRESPA TopLabPlus – monolithic slab of ultra-high pressing thickness of 6mm with a chemically resistant surface made of polyurethane-acrylic composition, on a substrate of wood-containing material (plywood 15mm or melamine 16mm), edged around the perimeter of PVC edge 2mm
1 built–in bowl - ceramic FRIDURIT. The location of the bowl in the center, fixing the bowl flush with the level of the countertop.
Inner bowl size – 400*400*250 mm
The base of the sink table is a support pedestal made of white melamine
Facades – laminated MDF of white color with a thickness of 16 mm, dark gray ABS edging
Without shelves
LOIP
Saint Petersburg
Produced in: Saint Petersburg
NV-800 LLn Laboratory table (700×700×750)
from
4 534 ₽
NV-800 LLn laboratory table for sitting work
The NV-800 LLn is a small laboratory table with a countertop width of only 700 mm. It is designed for sitting work (the height of the table is 750 mm, this is the height of a regular office desk).
The table top is made of laminated chipboard. This is an inexpensive solution suitable for office work, placement of devices, for school chemistry and physics classrooms.
The side laminated panels (chipboard 16 mm thick) are edged on the facade with a 2 mm PVC edge, which increases their impact resistance and mechanical strength.
The legs of the table are adjustable in height within two centimeters, allowing you to place it even on a rather uneven floor.
Dimensions of the table when assembled (W×D×H): 700×700×750 mm.
NV LAB
Moscow
Produced in: Moscow, Moscow region
NV-800 SHD Cabinet for documents (800*460*1820)
from
19 936 ₽
The NV-800 SHD cabinet with 4 shelves-inserts is designed for storing documents. The cabinet is made of laminated chipboard with a shockproof PVC edge of 2 mm on the facade.
Included in the set:
-2 glass doors on the upper compartment;
-2 glass doors in the lower compartment;
-4 shelves-inserts made of laminated chipboard;
-metal legs 100 mm high.
NV LAB
Moscow
Produced in: Moscow, Moscow region
NV-800 SCm Anti-vibration table for centrifuge (860×750×750)
from
17 801 ₽
The NV-800 SCm is a specialized laboratory table with a damping concrete slab on a sand cushion. Designed to accommodate centrifuges, sieves and other devices that vibrate strongly during operation.
Dimensions when assembled: 860×750×750 mm.
The table has a reinforced metal frame. The main countertop has a built-in drawer open from above, which contains a sand cushion. It is closed with a heavy concrete slab attached to a second, smaller countertop. The sand cushion and the concrete base of the second countertop provide good protection against vibrations.
The size of the anti-vibration countertop: 550×660 mm. Like the main countertop, it is made of chipboard, and visually they do not differ from each other.
The tables have a metal frame painted with powder paint. The side laminated panels (chipboard with a thickness of 16 mm) are edged with a durable PVC edge 2 mm thick, which increases their impact resistance and mechanical strength.
The legs of the table are adjustable in height within two centimeters, allowing you to place it even on a rather uneven floor.
NV LAB
Moscow
Produced in: Moscow, Moscow region
Laboratory work table high LAB-PRO SLv 180.65.90 KG
Laboratory work desk
Table top: KG (porcelain stoneware)
Length, mm: 1800
Depth, mm: 650
Height, mm: 900
BASIC EQUIPMENT
The base is a collapsible frame made of rectangular steel profile, painted with powder paint (RAL 7035) with the texture of shagreen leather
Hidden fasteners
Two easily removable rear screens (RAL 7035) and one non-removable (RAL 5023)
Adjustable supports (0-40 mm)
LOIP
Saint Petersburg
Produced in: Saint Petersburg
CHEMA ESD ANTISTATIC CHAIR
from
22 890 ₽
Suitable for comfortable seating at tables from 750 to 900 mm high. It is possible to replace the standard gas lift with a high one, which will allow changing the height adjustment range of the chair from 570 to 820 mm and using such a chair to work at tables above 900 mm. The permissible load on the product should not exceed 120 kg. Seat size - 455x440 mm, backrest - 410x370 mm.
SpetsBaltMebel
г. Санкт- Петербург
Produced in: Saint Petersburg
Safety cabinet LOIP SC-60/2
Features:
Flange for connection to ventilation systems
Compliance with European safety standards EN14470-1
Supply and exhaust ventilation system with shut-off valves (operating temperature 60 °C)
Fireproof insulation
Technical specifications:
Storage capacity, not less than 60 liters
The size of the shelf-pallet, WxDxH mm 380x410
Maximum load on the shelf-pallet, no more than 75 kg
Camera dimensions, HxWxD mm 320x380x420
External dimensions, HxWxD mm 630x600x657
Weight, not more than 140 kg
LOIP
Saint Petersburg
Produced in: Saratov
Table island high LAB-PRO SOCV 180.150.90 LA
Island table
Table top: LAMINAT (table top consists of 2 cohesive parts, the seam is treated with moisture-resistant glue)
Length, mm: 1800
Depth, mm: 1500
Height, mm: 900
BASIC EQUIPMENT
The base is a collapsible metal frame made of rectangular steel profile, painted with powder paint (RAL 7035) with the texture of shagreen leather
Four easily removable screens (RAL 7035) and two non-removable (RAL 5023)
Hidden fasteners
Adjustable supports (0-40 mm)
A set of end boxes-plugs
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Wall-mounted low table LAB-PRO SPKn 120.80.75 KG-ESS
Wall-mounted table
Combined working surface: main table top - KG-ESS (porcelain stoneware) with a side made of stainless steel, 650 mm deep / auxiliary table top made of TRESPA material with a depth of 150 mm
Length, mm: 1200
Depth, mm: 800
Height, mm: 750
BASIC EQUIPMENT
The base is a collapsible frame made of rectangular steel profile, painted with powder paint (RAL 7035) with the texture of shagreen leather
Hidden fasteners
Two easily removable rear screens (RAL 7035) and one non-removable (RAL 5023)
Rear side boxes
Adjustable supports (0-40 mm)
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Hinged cabinet LAB-M NSH 120.35.70
Furniture for laboratory work.
Mounted storage cabinet
Length, mm: 1200
Depth, mm: 350
Height, mm: 700
PACKAGE
CONTENTS the case is white melamine with a thickness of 16 mm, the ABS edge is dark gray
three compartments. Central compartment – open, side - with hinged doors
facades of side compartments – white melamine with dark gray ABS edge
in the central compartment there is 1 built-in shelf, in each side compartment there is 1 easily removable shelf with the possibility of rearrangement at 5 levels in height
the permissible load on the shelf is 20 kg.
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Metal single support cabinet with 4 drawers LAB-PRO TOMYA4 116.50.86
Metal single support cabinet with 4 drawers
Length, mm: 1160
Depth, mm: 500
Height, mm: 860
Completely made of steel painted with powder paint (RAL 7035) with the texture of shagreen leather
Frameless housing design
One compartment with 4 drawers
The side walls and facades are double. The thickness of the side walls is 19 mm, the facades are 18 mm
The facades are filled with noise-absorbing material
Handles - polypropylene
Telescopic guides of full extension
Internal size of the drawer: 1070*410*85 mm
The permissible load per box is 20 kg.
Hidden adjustable supports (0 - 40 mm). The adjustment of the supports is carried out from inside the pedestal through the base
of 8 standard variants of the working surfaces of LAB-PRO RP
LOIP
Saint Petersburg
Produced in: Saint Petersburg
NV-400 CHA Cabinet on wheels with 3 drawers (420*460*650)
from
7 154 ₽
The NV-400 TV cabinet on wheels has 3 drawers. The facade of the cabinet has a shockproof PVC edge.
The standard version of the cabinet on wheels for the laboratory table includes:
3 drawers on roller guides,
shockproof PVC edge 2 mm,
plastic wheel supports.
In the standard version, we offer cabinets for laboratory tables in gray color. However, in agreement with the customer, it is possible to change the color to white, without increasing the cost. We are also ready to adapt the size and materials so that they meet your needs.
NV LAB
Moscow
Produced in: Moscow, Moscow region
Storage cabinet general laboratory LAB-M SHL 50.50.194
Furniture for laboratory work.
General laboratory storage cabinet
Length, mm: 500
Depth, mm: 500
Height, mm: 1940
PACKAGE
CONTENTS housing – melamine white with a thickness of 16 mm, ABS edge dark gray
facades – melamine white with ABS edge dark gray
2 compartments (upper 686 mm high, lower 1076 mm high)
5 shelves (1 built-in, 4 removable (1 in the upper compartment, 3 in the lower) with the possibility of rearrangement on 3 levels in height each).
LOIP
Saint Petersburg
Produced in: Saint Petersburg