Catalog
Back to search results
SHVM NVK 1500 MON Metal fume cupboard without plumbing (1560×750×2250)
Back to search results
SHVM NVK 1500 MON Metal fume cupboard without plumbing (1560×750×2250)
from
120 792 ₽
from
120 792 ₽
Go to the manufacturer's website
The SHVM NVK 1500 MON is a metal fume cupboard for laboratory. The table top is made of monolithic piece of ceramics.
External dimensions of the cabinet (W×D×H): 1560×750×2250 mm.
Internal dimensions of the camera (W×D×H): 1500×600×1168 mm.
Table top material: monolithic ceramic.
A reliable and durable laboratory cabinet
The table top is made of monolithic ceramics. It is perfect for all chemical laboratories, including those that work with substances at high temperatures. It perfectly tolerates heat, is moisture-resistant, resistant to acids and alkalis. High-temperature equipment (drying cabinets, muffle furnaces) can be placed on the countertop. The width of the ceramic plate is 1200 mm, that is, there will be one seam in the countertop.
The cabinet is mounted on an all-welded metal frame covered with durable powder paint. All panels are made of polymer-coated metal. The front anti-spill side is made of the AISI-316 polished stainless steel.
There are four exhaust zones in the working chamber: they are located in the hood of the exhaust box and above the level of the countertop. Diameter of the flange for connection to the ventilation system: 150 mm. The hood area is also made of metal.
The protective screen of the cabinet can be easily lifted with one hand. It folds up and when lifted does not increase the overall height of the cabinet. It is made of 4-mm tempered glass in an aluminum frame.
The sockets and the switch of the LED lamp are located outside the working area, on the right-hand side of the front panel of the cabinet. The sockets are splash-proof and are designed for current up to 16 A and voltage up to 250 V. Next to the switch there is a toggle switch of the automatic emergency power off.
The reagents needed for work can be placed in the lower cabinet cabinet. The cabinet is also made of metal. The cabinet has swing doors and one non-removable shelf. It has its own hood (pipe diameter 100 mm), which can be connected to the general exhaust system of the cabinet using the nozzle included in the cabinet kit.
The cabinet legs are adjustable in height, allowing you to place the cabinet even on a rather uneven floor.
Advantages of the SHVM NVK 1500 MON cabinet
A metal fume cupboard, perfect for any laboratory;
The wide table top allows you to equip the workplace as conveniently as possible;
It is durable, reliable and very convenient to use;
The protective screen is made of tempered glass;
The cupboard is built into the cabinet, reagents can be safely stored in it.
Application of the SHVM NVK 1500 MON cabinet
Exhaust laboratory cabinets are used when working with toxic and harmful volatile materials, with clean materials, with dissolution or decomposition under heat treatment, when conducting sample analysis.
Fume cupboards of the NV-Comfort series are used in laboratories of the widest profile: at food and light industry enterprises, in higher educational and scientific institutions, in chemistry classrooms at school, in quality control centers, medical organizations.
External dimensions of the cabinet (W×D×H): 1560×750×2250 mm.
Internal dimensions of the camera (W×D×H): 1500×600×1168 mm.
Table top material: monolithic ceramic.
A reliable and durable laboratory cabinet
The table top is made of monolithic ceramics. It is perfect for all chemical laboratories, including those that work with substances at high temperatures. It perfectly tolerates heat, is moisture-resistant, resistant to acids and alkalis. High-temperature equipment (drying cabinets, muffle furnaces) can be placed on the countertop. The width of the ceramic plate is 1200 mm, that is, there will be one seam in the countertop.
The cabinet is mounted on an all-welded metal frame covered with durable powder paint. All panels are made of polymer-coated metal. The front anti-spill side is made of the AISI-316 polished stainless steel.
There are four exhaust zones in the working chamber: they are located in the hood of the exhaust box and above the level of the countertop. Diameter of the flange for connection to the ventilation system: 150 mm. The hood area is also made of metal.
The protective screen of the cabinet can be easily lifted with one hand. It folds up and when lifted does not increase the overall height of the cabinet. It is made of 4-mm tempered glass in an aluminum frame.
The sockets and the switch of the LED lamp are located outside the working area, on the right-hand side of the front panel of the cabinet. The sockets are splash-proof and are designed for current up to 16 A and voltage up to 250 V. Next to the switch there is a toggle switch of the automatic emergency power off.
The reagents needed for work can be placed in the lower cabinet cabinet. The cabinet is also made of metal. The cabinet has swing doors and one non-removable shelf. It has its own hood (pipe diameter 100 mm), which can be connected to the general exhaust system of the cabinet using the nozzle included in the cabinet kit.
The cabinet legs are adjustable in height, allowing you to place the cabinet even on a rather uneven floor.
Advantages of the SHVM NVK 1500 MON cabinet
A metal fume cupboard, perfect for any laboratory;
The wide table top allows you to equip the workplace as conveniently as possible;
It is durable, reliable and very convenient to use;
The protective screen is made of tempered glass;
The cupboard is built into the cabinet, reagents can be safely stored in it.
Application of the SHVM NVK 1500 MON cabinet
Exhaust laboratory cabinets are used when working with toxic and harmful volatile materials, with clean materials, with dissolution or decomposition under heat treatment, when conducting sample analysis.
Fume cupboards of the NV-Comfort series are used in laboratories of the widest profile: at food and light industry enterprises, in higher educational and scientific institutions, in chemistry classrooms at school, in quality control centers, medical organizations.
SHVM NVK 1200 MON+ Metal fume cupboard with plumbing (1260×750×2250)
from
116 089 ₽
The SHVM NVK 1200 MON+ is a metal fume cupboard with plumbing for work in the laboratory. The table top is made of monolithic ceramics, its width is 1200 mm.
External dimensions of the cabinet (W×D×H): 1260×750×2250 mm.
Internal dimensions of the camera (W×D×H): 1200×600×1168 mm.
Table top material: monolithic ceramic.
A reliable and durable fume cupboard for the laboratory
The table top is made of a single ceramic plate with a width of 1200 mm. The seamless monolith of the countertop provides the highest reliability and durability.
The ceramics are great for all chemical laboratories, including those that work with substances at high temperatures. It perfectly tolerates heat, is moisture-resistant, resistant to acids and alkalis. High-temperature equipment (drying cabinets, muffle furnaces) can be placed on the table top.
The cabinet is mounted on an all-welded metal frame covered with durable powder paint. All panels are made of polymer-coated metal. The front anti-spill side is made of AISI-316 polished stainless steel.
There are four exhaust zones in the working chamber: they are located in the hood of the exhaust box and above the level of the countertop. Diameter of the flange for connection to the ventilation system: 150 mm. The hood area is also made of metal.
The protective screen of the cabinet can be easily lifted with one hand. It folds up and when lifted does not increase the overall height of the cabinet. It is made of 4 mm tempered glass in an aluminum frame.
The small sink-drain is made of polypropylene, resistant to aggressive chemicals. Its internal dimensions: 218×115×122 mm. The faucet is made of brass and covered with polypropylene.
The sockets and the switch of the LED lamp are located outside the working area, on the right-hand side of the front panel of the cabinet. The sockets are splash-proof and designed for current up to 16 A and voltage up to 250 V. Next to the switch there is a toggle switch of the automatic emergency power off.
The reagents needed for work can be placed in the lower cabinet. The cabinet is also made of metal. It has three swing doors and one fixed shelf. It has its own hood (pipe diameter 100 mm), which can be connected to the general exhaust system of the cabinet using the nozzle included in the cabinet kit.
The cabinet legs are adjustable in height, allowing you to place the cabinet even on a rather uneven floor.
Advantages of the cabinet SHVM NVK 1200 MON+
A metal fume cupboard with plumbing, an excellent choice for any laboratory;
Durable, reliable and very convenient to use;
The protective screen is made of tempered glass;
The hood is built into the cabinet, reagents can be safely stored in it.
Application of the SHVM NVK 1200 MON+ cabinet
Exhaust laboratory cabinets are used when working with toxic and harmful volatile materials, with clean materials, with dissolution or decomposition under heat treatment, when conducting sample analysis.
Fume cupboards of the NV-Comfort series are used in laboratories of the widest profile: at food and light industry enterprises, in higher educational and scientific institutions, in chemistry classrooms at school, in quality control centers, medical organizations.
NV LAB
Moscow
Produced in: Moscow, Moscow region
SHVM NVK 1200 MON Metal fume cupboard without plumbing (1260×750×2250)
from
110 927 ₽
The SHVM NVK 1200 MON is a metal fume cupboard for laboratory. The table top is made of monolithic ceramics, its width is 1200 mm.
External dimensions of the cabinet (W×D×H): 1260×750×2250 mm.
Internal dimensions of the camera (W×D×H): 1200×600×1168 mm.
Table top material: monolithic ceramic.
Reliable and durable construction
The table top is made of a single ceramic plate with a width of 1200 mm. The seamless monolith of the countertop provides the highest reliability and durability.
THe ceramics are great for all chemical laboratories, including those that work with substances at high temperatures. It perfectly tolerates heat, is moisture-resistant, resistant to acids and alkalis. High-temperature equipment (drying cabinets, muffle furnaces) can be placed on the table top.
The cabinet has an all-welded metal frame covered with durable powder paint. All panels are made of polymer-coated metal. The front anti-spill side is made of polished stainless steel AISI-316.
There are four exhaust zones in the working chamber: they are located in the hood of the exhaust box and just above the level of the countertop. Diameter of the flange for connection to the ventilation system: 150 mm. The hood area is also made of metal.
The protective screen of the cabinet can be easily lifted with one hand. It folds up and when lifted does not increase the overall height of the cabinet. It is made of 4 mm tempered glass in an aluminum frame.
The sockets and the switch of the LED lamp are located outside the working area, on the right-hand side of the front panel of the cabinet. The sockets are splash-proof and are designed for current up to 16 A and voltage up to 250 V. Next to the switch there is a toggle switch of the automatic emergency power off.
The reagents needed for work can be placed in the lower cabinet also made of metal. The cabinet has three swing doors and one fixed shelf. It has its own hood (pipe diameter 100 mm), which can be connected to the general exhaust system of the cabinet using the nozzle included in the cabinet kit.
The cabinet legs are adjustable in height, allowing you to place the cabinet even on a rather uneven floor.
Advantages of the SHVM NVK 1200 MON cabinet
A metal fume cupboard suitable for any laboratory;
Durable, reliable and very convenient to use;
The protective screen is made of tempered glass;
A hood is built into the cabinet, reagents can be safely stored in it.
Application of the SHVM NVK 1200 MON cabinet
Exhaust laboratory cabinets are used when working with toxic and harmful volatile materials, with clean materials, with dissolution or decomposition under heat treatment, when conducting sample analysis.
Fume cupboards of the NV-Comfort series are used in laboratories of the widest profile: at food and light industry enterprises, in higher educational and scientific institutions, in chemistry classrooms at school, in quality control centers, medical organizations.
NV LAB
Moscow
Produced in: Moscow, Moscow region
SHVM NVK 1500 MON+ Metal fume cupboard with plumbing (1560×750×2250)
from
123 771 ₽
The SHVM NVK 1500 MON+ is a large metal fume cupboard with plumbing fixtures for laboratory. The table top is made of monolithic ceramics, its width is 1200 mm.
External dimensions of the cabinet (W×D×H): 1560×750×2250 mm.
Internal dimensions of the camera (W×D×H): 1500×600×1168 mm.
Table top material: monolithic ceramic.
A reliable and durable fume cupboard for laboratory
The table top is made of monolithic ceramics. It is perfect for all chemical laboratories, including those that work with substances at high temperatures. It perfectly tolerates heat, is moisture-resistant, resistant to acids and alkalis. High-temperature equipment (drying cabinets, muffle furnaces) can be placed on the countertop. The width of the ceramic plate is 1200 mm, that is, there will be one seam in the countertop.
The cabinet is mounted on an all-welded metal frame covered with durable powder paint. All panels are made of polymer-coated metal. The front anti-spill side is made of polished stainless steel AISI-316.
There are four exhaust zones in the working chamber: they are located in the hood of the exhaust box and just above the level of the countertop. Diameter of the flange for connection to the ventilation system: 150 mm. The hood area is also made of metal.
The protective screen of the cabinet can be easily lifted with one hand. It folds up and when lifted does not increase the overall height of the cabinet. It is made of 4 mm tempered glass in an aluminum frame.
The small sink-drain is made of polypropylene, it is resistant to aggressive chemicals. Its internal dimensions: 218×115×122 mm. The faucet is made of brass, covered with polypropylene.
The sockets and the switch of the LED lamp are located outside the working area, on the right-hand side of the front panel of the cabinet. The sockets are splash-proof and are designed for current up to 16 A and voltage up to 250 V. Next to the switch there is a toggle switch of the automatic emergency power off.
The reagents needed for work can be placed in the lower cabinet. The cabinet is also made of metal. It has three swing doors and one fixed shelf. It has its own hood (pipe diameter 100 mm), which can be connected to the general exhaust system of the cabinet using the nozzle included in the cabinet kit.
The cabinet legs are adjustable in height, allowing you to place the cabinet even on a rather uneven floor.
Advantages of the SHVM NVK 1500 MON+ cabinet
A metal fume cupboard with plumbing, suitable for any laboratory;
The wide table top allows you to organize the workplace as conveniently as possible;
It is durable, reliable and very convenient to use;
The protective screen is made of tempered glass;
The hood is built into the cabinet, reagents can be safely stored in it.
Application of the SHVM NVK 1500 MON+ cabinet
Exhaust laboratory cabinets are used when working with toxic and harmful volatile materials, with clean materials, with dissolution or decomposition under heat treatment, when conducting sample analysis.
Exhaust cabinets of the NV-Comfort series are used in laboratories of the widest profile: at food and light industry enterprises, in higher educational and scientific institutions, in chemistry classrooms at school, in quality control centers, medical organizations.
NV LAB
Moscow
Produced in: Moscow, Moscow region
Laboratory washing table SM-90.64.90
A table with an overall height of 900 mm with a countertop measuring 900 × 640 mm made of porcelain stoneware, monolithic ceramics or stainless steel.
It is designed for long-term operation, the power frame does not contain aluminum and plastic parts in the fasteners.
Overall dimensions without superstructure 900x640x900 mm
Termeks
Tomsk
Produced in: Tomsk
NV-1500 SM microscopy table (1500×700×750)
from
8 578 ₽
The NV-1500 SM is a specialized table for microscopy. The table top is 70 cm deep and is made of laminate. It is designed for sitting work: the height from the floor to the countertop is 75 cm (this is the height of a regular office desk).
External dimensions of the table (W×D×H): 1500×700×750 mm.
A small superstructure allows you to compactly place the necessary drugs and accessories next to the workplace. Its dimensions: (W×D×C): 668×120×200 mm.
The table top is made of laminated chipboard. It is relatively moisture-resistant, resistant to short-term exposure to acids, alkalis and organic solvents and is well suited for the placement of devices.
The side laminated panels of the table (chipboard 16 mm thick) are edged with a PVC edge 2 mm thick, which increases their impact resistance and mechanical strength.
The legs of the table are adjustable in height within two centimeters, allowing you to place it even on a rather uneven floor.
NV LAB
Moscow
Produced in: Moscow, Moscow region
Laboratory work table high LAB-PRO SLv 90.65.90 KG
Laboratory work desk
Table top: KG (porcelain stoneware)
Length, mm: 900
Depth, mm: 650
Height, mm: 900
BASIC EQUIPMENT
The base is a collapsible frame made of rectangular steel profile, painted with powder paint (RAL 7035) with the texture of shagreen leather
Hidden fasteners
Two easily removable rear screens (RAL 7035) and one non-removable (RAL 5023)
Adjustable supports (0-40 mm)
LOIP
Saint Petersburg
Produced in: Saint Petersburg
NV-1500 SHVD-U Two-frame fume cupboard with plumbing and countertop made of granite tiles
from
58 691 ₽
The Kors NV-1500 SHVD-U laboratory fume cupboard is a two—frame cabinet with a granite countertop with a width of 1410 mm and a small built-in sink made of polypropylene.
External dimensions of the cabinet (W×D×H): 1410×700×1960 mm.
Dimensions of the working area (W×D×H): 1378×540×750 mm.
Table top: granite tiles.
Working surface material: porcelain tile. It is moisture-resistant and perfectly withstands high temperatures. It is resistant to prolonged exposure to concentrated acids, alkalis and organic solvents. Limited resistance to hydrofluoric acid. This is one of the most popular types of countertops for laboratory furniture.
The small sink-drain is made of polypropylene, resistant to aggressive chemicals. Its diameter is 135 mm and its depth is 110 mm.
The working area is closed by two lifting frames with a counterweight. As standard, there are two exhaust zones: the hood of the exhaust box and the level of the countertop. Diameter of the flange for connection to the ventilation system: 150 mm.
Working area size (W×D×H): 1378×540×750 mm. Please note that the cabinet narrows upwards. At a height of 50 cm, the depth of the working area will be 410 mm, at a height of 70 cm: 365 mm. If you need to place high equipment, then make sure that it corresponds to the dimensions of the camera, otherwise you will not be able to close the cabinet.
The height of the raised glass above the cabinet: 510 mm, that is, when the glass is raised, the height of the cabinet will be 2470 mm.
The NV-1500 SHVD-U fume cupboard is equipped with an LED lamp with a switch and two sockets, one of them with grounding. Sockets have the IP20 degree of protection, the maximum load on them: 1.5 kW.
The working chamber is an all-welded metal frame in powder coating. Load-bearing laminated panels (chipboard with a thickness of 16 mm) are edged on the facade with a durable PVC edge with a thickness of 2 mm, which increases the impact resistance and mechanical strength of the products.
The cabinet legs are adjustable in height within two centimeters, allowing you to place the cabinet even on a rather uneven floor.
NV LAB
Moscow
Produced in: Moscow, Moscow region
Cabinet for storing dishes, documents SHL-90.50.202
900 mm wide, 2025 mm high cabinet made of painted steel for storing laboratory utensils and documents.
Two compartments with two metal shelves in each. The upper doors are made of glass, the lower ones are made of steel.
Overall dimensions 900x500x2025 mm
Weight 95 kg
Termeks
Tomsk
Produced in: Tomsk
Exhaust cabinet for washing dishes LAB-PRO SHVM 150.74.230 PP
BASIC EQUIPMENT
Working box
guide posts – aluminum profile painted with powder paint (RAL 7035/RAL 5023) in the right rack there is a light switch
front anti–spill side - acid-resistant polished stainless steel AISI 304
side panels – tempered glass
2 dependent lifting screens – tempered glass in aluminum frames, lifting 0-780mm, do not change the dimensions of the cabinet when lifting
the upper fixed screen – metal painted with powder paint (RAL 5023) with the texture of shagreen leather
back and top panels – polypropylene
on the top panel:
LED lamp dust- and moisture-proof 22W IP65
switching box with automatic emergency shutdown power supply 16A
flange d=250mm (the distance from the back panel to the center of the flange is 170mm)
easily removable exhaust canopies
3 exhaust levels (lower, side and front)
counterweights are placed in the front pylon racks and are easily serviced
Frame base
metal pedestal painted with powder paint (RAL 7035) with the texture of shagreen leather
facades – laminated MDF with a thickness of 16mm
handles – polypropylene
2 compartments with locks
1 shelf with the possibility of installation on three levels in any of the compartments (when the cabinet is equipped with 2 bowls, shelves are not included)
flange d=100mm
service panel – aluminum profile painted with powder paint (RAL 5023) with the texture of shagreen leather:
adjustable supports
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Table-sink LAB-800 MD
The
table top is a single module made of stainless steel SUS 201 (analog AISI 201)
ATTENTION! The product is recommended to be used only for work with non-aggressive substances.
inner bowl size – 340*400* 130mm
cabinet body – melamine 16mm thick
LOIP
Saint Petersburg
Produced in: Saint Petersburg
The low mezzanine for storage cabinets LAB-M An 80.50.40
Furniture for laboratory work.
The mezzanine is low to the storage cabinets
Length, mm: 800
Depth, mm: 500
Height, mm: 1940
PACKAGE
CONTENTS housing – white melamine with a thickness of 16 mm
facades – white melamine, ABS edge dark gray
1 compartment without shelf
without locks
handles-brackets dark gray 128 mm, polypropylene.
LOIP
Saint Petersburg
Produced in: Saint Petersburg
NV-1500 O Physical island tables (1520×1520×1650)
from
48 395 ₽
NV-1500 O is an island table with a superstructure that can be placed in the center of the laboratory and organize workplaces on its two sides. Table top depth: 152 cm. It is designed for standing work: the height from the floor to the table top is 85 cm. A lamp and two sockets are built into the superstructure on each side.
External dimensions of the table (W×D×H): 1520×1520×1650 mm.
Work surface for your tasks
We offer tables with various work surfaces.
Table Model: Tabletop
NV-1500 OL: Laminate. It is relatively moisture-resistant, resistant to short-term exposure to acids, alkalis and organic solvents. This countertop does not tolerate strong heating or prolonged exposure to solvents, concentrated acids and alkalis.
NV-1500 OK: Porcelain tile. It is a practical solution for most chemical, biological, medical laboratories and workshops. You can put drying cabinets, baths and other heating devices on it.
NV-1500 OSB: Chemically resistant plastic. It is a good choice for training workshops, analytical and medical laboratories. It does not tolerate high temperatures well, heating devices should not be placed on the surface.
NV-1500 OP: Polypropylene. It is chemically resistant, being a specialized solution for chemical laboratories that work a lot with concentrated inorganic acids and alkalis. It is not resistant to high temperatures.
A table for convenient work in the laboratory
The superstructure allows you to compactly place the necessary reagents and laboratory utensils next to the workplace. Its depth is 30 cm, and its height is 80 cm.
The working area on each side is illuminated by a fluorescent lamp (included in the package). The switch is located on the left-hand side of the superstructure. There are also two sockets, one of which is grounded. Sockets (with two on each side, there are four of them in total) have the IP20 degree of protection, maximum load: 1.5 kW.
Two cabinets are built into the table on each side, one with a hinged door and a shelf inside, the other with three pull-out drawers. You can store there laboratory utensils or small stuss you need at hand.
The side laminated panels of the table (chipboard 16 mm thick) are edged on the facade with a 2 mm PVC edge, which increases their impact resistance and mechanical strength.
The legs of the table are adjustable in height within two centimeters, allowing you to place it even on a rather uneven floor.
NV LAB
Moscow
Produced in: Moscow, Moscow region
Storage cabinet LAB-PRO TX 113.50.63 PP
The complete set is fully made of polypropylene.
There are no components sensitive to the action of corrosive substances. Inside the storage area there are 2 compartments.In each compartment there is 1 easily removable shelf made of polypropylene with the possibility of installation at 3 levels in heightThe permissible load on the shelf is 30 kg.
The storage cabinet also includes: 2 hinged facades made of polypropylene
hinges outside the storage area (pin system)
polyamide lock in each door
handles made of polypropylene
cabinet has a double back wall. Extraction of reagent vapors is carried out from all storage areas
flange ∅ 100 mm on the back wall for connection to the exhaust ventilation
hidden adjustable supports (0-40 mm). The adjustment of the supports is carried out from inside the pedestal through the base
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Exhaust cabinet LAB-M SHV ME 180.74.210 F20
Furniture for laboratory work.
All-metal exhaust cabinet
Working surface: FRIDURIT (20 mm)
Overall dimensions:
Length, mm: 1800
Depth, mm: 740
Height, mm: 2100
equipment
Working box
anti–spill side – acid–resistant polished stainless steel AISI 316
housing - metal painted with white powder paint (RAL 9016)
guide posts – aluminum profile painted with dark gray powder paint (RAL 7011)
2 dependent lifting screens - tempered glass in aluminum frames, lifting 0-710mm, not change the dimensions of the cabinet when lifting.
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Laboratory wall-mounted low table SL-180.80.76
The table is 760 mm high with a countertop measuring 1800×800 mm made of porcelain stoneware, monolithic ceramics, stainless steel, chipboard or plastic.
It is designed for sitting work. It can be equipped with various superstructures, sliding and hanging bollards.
Overall dimensions 1800x800x760 mm
Termeks
Tomsk
Produced in: Tomsk
Table island high LAB-PRO SOCV 180.150.90 LA
Island table
Table top: LAMINAT (table top consists of 2 cohesive parts, the seam is treated with moisture-resistant glue)
Length, mm: 1800
Depth, mm: 1500
Height, mm: 900
BASIC EQUIPMENT
The base is a collapsible metal frame made of rectangular steel profile, painted with powder paint (RAL 7035) with the texture of shagreen leather
Four easily removable screens (RAL 7035) and two non-removable (RAL 5023)
Hidden fasteners
Adjustable supports (0-40 mm)
A set of end boxes-plugs
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Exhaust cabinet LAB-800 ballscrews
Working surface: Porcelain stoneware (ceramic tile 300*300mm)
Length, mm: 832
Depth, mm: 925
Height, mm: 2100
equipment
Working box
the side and back panels are lined with a row of ceramic tiles to a height of 400mm
the case is melamine with a thickness of 16mm
lifting screen with the possibility of fixing at any height – organic acrylic glass with a thickness of 8mm, lifting 0–750mm, increases the height of the cabinet with a full lift by 430mm
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Exhaust cabinet for organic synthesis LAB-PRO SHVOS 150.84.230 TR
BASIC EQUIPMENT
Working box
the front guide posts are aluminum profile painted with powder paint (RAL 7035/RAL 5023), in the right rack there are a light switch and 2 splash–proof sockets with a 3.2kW cover (IP54)
the front anti–spill side is acid-resistant polished stainless steel. AISI 304 steel
rear, upper, side panels – metal painted with powder paint (RAL 7035) with the texture of shagreen leather
the inner surfaces of the working box are lined with chemically resistant HPL plastic
2 dependent lifting screens – tempered glass in aluminum frames, lifting 0-780mm, do not change the dimensions of the cabinet when lifting
the upper fixed screen – tempered glass in an aluminum frame
on the upper panel:
LED dust- and moisture-proof lamp (2X10W IP65) is separated from the workspace by tempered glass thickness of 4mm
flange d=250mm (distance from the rear panel to flange center – 170mm)
easily removable exhaust canopies
3 exhaust levels
on the left side panel service module with cold water supply pipe and wall-mounted drain sink made of polypropylene
cold water supply valve in the left rack of the box
counterweights are placed in the front racks-pylons and are easily serviced
Frame base
collapsible frame made of rectangular metal profile painted with powder paint (RAL 7035) with the texture of shagreen leather
service panel - aluminum profile painted with powder paint (RAL 7035/RAL 5023) with the texture of shagreen leather
adjustable supports
module with two drawers
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Mobile LAB table-800 STPT
Furniture for laboratory work.
Mobile table
Working surface: TRESPA TopLab 6mm, on a substrate of wood-containing material (plywood 15mm, melamine 16mm), edged around the perimeter of PVC edge 2mm.
Length, mm: 800
Depth, mm: 600
Height, mm: 800
The complete set of the shelf at a distance of 250mm from the floor is melamine with a thickness of 16mm
all–welded frame made of a rectangular metal profile painted with white powder paint
roller supports h = 60mm (without stopper)
LOIP
Saint Petersburg
Produced in: Saint Petersburg
LAB-1600 TT Titration table
Furniture for laboratory work.
Laboratory table
Working surface: TRESPA TopLab 6mm, on a substrate of wood-containing material (plywood 15mm, melamine 16mm), edged around the perimeter of PVC edge 2mm.
Length, mm: 1600
Depth, mm: 600
Height, mm: 900(1800)
EQUIPMENT
rack support racks – aluminum profile painted with powder paint (RAL 1001)
the top panel of the rack with a depth of 190mm – metal painted with powder paint (RAL 1001)
LOIP
Saint Petersburg
Produced in: Saint Petersburg