Search

It is intended for thermostating samples in glasses, flasks and other laboratory utensils in cases where high accuracy of temperature maintenance is not required and good uniformity of the temperature field in the working volume is not needed. The operating temperature range is Current +5...+200 °C. Six workstations with a diameter of 110 mm with five steel O-rings, tripods and feet with a clip. Stamped steel tub with a volume of 19 liters and a depth of 110 mm. Bath volume 19 l Overall dimensions 570x660x660 mm The open part of the bath is 500x290 mm Bath depth 110 mm Weight 13.5 kg Power consumption 2.5 kW

It is used for evaporation to a dry residue of neutral, alkaline and acidic liquids. Made of TS glass according to GOST 21400-75.TU 4320-012-29508133-2009

It is intended for obtaining analytical purity in laboratory conditions from distilled water, used for HPLC, electrophoresis, preparation of solutions, chromatographic samples, refueling of electrolysis generators of hydrogen/oxygen and other purposes. Technical specifications The specific resistance of the received water is not less than 17.5 MOmhsm Productivity is not less than 1 l/hour Metal ion content is not more than: Fe, Pb, Ni, Co 5 mcG/l Zn 0,5 mcG/l Cd, Cu, Mn 0,1 mcG/l The content of ammonium ions is not more than 100 mcG/l The number of bacteria is not more than 5 CFU/ml Operating time of replaceable cartridges (total volume of purified water) is not less than 300 liters Volume of refilled distilled water is 1 l Overall dimensions are 210x590x455 mm The mass of the filled device is not more than 15 kg Working conditions: ambient temperature from +15 to +35 °C Power supply from single-phase AC 220 V, 50 Hz Power consumption is not more than 50 VA

The furnace can be used as a universal laboratory muffle furnace in metallurgical, jewelry and ceramic production, in orthopedic dentistry, chemical and food laboratories. Technical specifications The furnace operates at ambient temperatures from 10 to 35 ° C and relative humidity up to 80% at 25 ° C. The designation of the furnace when ordering: muffle furnace MIMP-75P, where 75 indicates the volume of the furnace working chamber in liters. Power consumption – 6000 W Dimensions of the working chamber WxDxH- 305x300x230 mm Dimensions WxDxH- 570x580x550 mm Weight – 75* kg (* - with control unit)

GCHA-120 nitrogen generators are designed to produce in laboratory conditions nitrogen of the highest purity that is used to power analytical instruments, boxes with an inert atmosphere. Technical specifications The grade of nitrogen produced according to GOST 9293-74 is high purity, grade I Volume fraction of nitrogen is not less than % by volume (including impurities of inert gases — argon, neon, helium) 99.999 Volume fraction of oxygen is not more than, % vol. 0.0005 (5 ppm) Volume fraction of water vapor is not more than, % vol. 0.0007 (7 ppm) Volume fraction of hydrogen is not more than, % vol. (ppm) 0.0002 (2 ppm) The volume fraction of the sum of carbon-containing compounds in terms of methane is not more than, % vol. (ppm)* (with a methane content in the supply air of not more than 4 ppm) 0.0003 (3 ppm) Maximum nitrogen capacity is at least 120 (2.0 l/min), l/h Nominal nitrogen output pressure (with the throttle open) is 4 ati The time of setting the operating mode for single-shift operation is no more than 45 min Nominal inlet air pressure is 6 ati Maximum allowable inlet air pressure is 8 ati Minimum inlet air pressure is 5.5 ati Compressed air consumption, at nominal inlet pressure and maximum flow rate is no more than, l/h, 3600 (60 l/min) Power consumption is not more than, VA, 100 Overall dimensions, (width x depth x height) are not more than, mm, 230x580x680; Weight is not more than, kg 32 Working conditions: ambient temperature, C°, from +10 to +35 Electric power supply from single-phase AC mains voltage, V, 220± 10% and frequency, Hz, 50 ± 1 Average full service life is at least 6 years The generator for electrical safety meets the requirements of Class 1, type H according to GOST 12.2.025-76

The principle of operation of dosimeters is based on the accumulation of ionizing radiation energy by detectors proportional to the radiation dose. In DVG-02TM installations, DOZA-TLD complexes, etc., when the detector is heated, the accumulated energy is released in the form of light radiation, which is recorded by an electronic device.

EQUIPMENT rack support racks – aluminum profile painted with powder paint (RAL 1001) top panel with a depth of 190mm – metal painted with powder paint (RAL 1001)

IL-15 is a pleiotropic cytokine. It is essential for the development, survival, and activation of NK cells. Participates in the induction of cytotoxic effector cells. Acting as an interleukin-2 antagonist, IL-15 contributes to the maintenance of CD8+ T memory cells and the maintenance and survival of CD4+ and CD8+ T lymphocytes. Acts on a number of other cells.

Suspended frame cabinet with a width of 770 mm with sheet steel panels for fume hoods of the SHV 100 series. It consists of two compartments with one shelf in each. Overall dimensions 770x590x720 mm

The table is 760 mm high with a countertop measuring 1800 × 640 mm made of porcelain stoneware, monolithic ceramics, stainless steel, chipboard or plastic. Designed for sitting work. It can be equipped with various superstructures, sliding and hanging bollards. Overall dimensions 1800x640x760 mm

The case is metal, powder–painted (RAL 7035) with the texture of shagreen leather , double metal facades with a noise suppressor, opening angle 270° handles – polypropylene adjustable supports cabinet with 2 doors and 2 drawers LAB-PRO VOLUME 2: upper compartment with 2 drawers: telescopic guides of full extension the internal size of the drawer: a pedestal with a length of 1160 mm – 500*410* 85mm permissible load on the box – 30kg

General laboratory cabinet with a width of 900 mm, a height of 2025 mm made of painted steel for storing clothes. One compartment with a shelf and a barbell. Overall dimensions 900x500x2025 mm Weight 81 kg