Primelab

Reagent Jar, Dark Glass PrimeLab, 20000 ml is designed to meet laboratory safety standards, providing reliable protection against possible hazards and elementary leakage. It has a form convenient for work. There is a measuring scale and an area for notes on the wall. Characteristics: • Volume – 5000 ml • Height – 505 mm • Diameter – 299 mm • Thread - GL45.

The working surface of the stirrer is made of stainless steel and the platform is made of glass ceramics; can heat up to +500 °C. If this temperature is exceeded by 50 degrees, auto protection will work and the mixer will turn off. The speed range of the mixer is from 200 to 1500 rpm. The heated stirrer has an LCD screen that displays the set and actual temperature and rotation speed. Other animated icons show various operating parameters of the device. The creators of the stirrer paid great attention to the safety of the laboratory assistant: after turning off the stirrer, until the working surface cools down to +50 ° C, the inscription “PLATE HOT!” will flash on the screen. and current temperature value. At a given level, the stirrer can maintain either the temperature of the mixture or the temperature of the heating surface. To accurately maintain the mixture temperature there is an external PT1000 sensor.

Desiccator 2-240 mm PrimeLab without tap is made of light glass. It is the optimal solution for storing and protecting samples from moisture and the harmful effects of the external environment. Provides stable conditions with low humidity levels, which has a positive effect on the contents of the dishes. Supplied with a porcelain disc. Characteristics: • The height of all dishes is 325 mm with a lid height of 115 mm • Desiccator diameter – 240 mm

Main characteristics Temperature measurement range, °C From -70 to + 300 Temperature measurement error, °C, no more than 1 Nominal resistance at 25 C, kOhm 1.0 Dimensions, weight Height 40 cm Sensor projection from the stand is 16 cm

The vacuum membrane pump PL.HM01.02.10 Primelab is designed for pumping steam-gas-air media, creating a vacuum, vacuum filtration and drying. The valves are made of FFKM, the chambers are made of fluoroplastic, all connecting elements and parts are coated with fluoroplastic. The pump has good performance despite its compact dimensions (321.5x160x200 mm). At a maximum pressure of 10 mbar it is capable of pumping up to 38 l/min. Does not require constant maintenance. Complies with IP20 protection class. It has a low noise level (up to 75 dB), which does not create discomfort for laboratory staff. Supplied complete with equipment sufficient for assembly and start-up.

The PrimeLab borosilicate glass reaction flask is an essential glass vessel used in scientific research, educational institutions, laboratories and industries. It is practically impossible to do without it when carrying out chemical reactions. The flask is made of transparent borosilicate glass, which allows you to observe the reaction process in real time. At the same time, it has a long service life and wear resistance. Suitable for heating and cooling contents as it is thermally stable. The PrimeLab company is ready to manufacture reaction flasks in any quantity to order. The order fulfillment time depends on the volume.

Along JSC 14/23 - 14/23 Primelab is a special accessory that is used to connect various installations and secure exchange between them. Provides a tight connection. It has chemical and thermal resistance and tolerates temperature changes well. Made from borosilicate glass 3.3. Connection to auxiliary equipment is made using a coupling grind (14/23) and a core (14/23). The total length of the allonge is 90 mm with a diameter of 6 mm.

Characteristics Valve(s) material Standard: chloroprene copolymer NO-68-1 (TU 38 0051166-98) A country Russia Overall dimensions, L×W×H, mm 322x140x200 Protection class acc. to DIN EN60529 IP20 Noise level, dB 75 dBA Nutrition 230 V, 50 Hz Material working chamber PTFE (fluoroplastic) Ultimate vacuum, mbar abs. 10 for serial, 50 for parallel, 50x2 for independent connection Excess pressure, bar. Maximum permissible excess operating pressure 0.5 bar Productivity, l/min 76 with parallel, 38 with serial, 38x2 with independent connection Maximum current, A 1.2 Equipment Vacuum pump, cable, instructions, passport, packaging (vacuum regulator and spare parts are not included in the kit and must be ordered separately). Device weight, kg 8.6

The PrimeLab water jet pump is a simple but effective laboratory device for pumping air from an evaporator, reactor and other equipment, as well as creating a vacuum without connecting to an electrical network. For operation, the use of water supply is sufficient. The pump is made of tempered heat-resistant glass, which ensures a long service life in the absence of serious mechanical damage. At the top of the pump there is a tube to which a soft hose is attached. Through it, water enters the water jet pump. There is a drain pipe at the bottom through which the water drains. A device is connected to the side tube in which it is necessary to pump out the air.

The electrochemical cell made of borosilicate glass was manufactured in the glassblowing workshop of the PrimeLab company. It has a long service life and is thermal and chemical resistant. Designed for various electrochemical processes. Externally, it has a non-standard shape with three branches, at the ends of which there are olives. Thanks to this, any soft hose can be firmly attached to the cell. Made of borosilicate glass, which is resistant to mechanical stress. Suitable for working in high temperature environments. You can order electrochemical cells made of borosilicate glass from Primelab in any quantity. Production times depend on quantity.

Primelab is a company that produces and sells laboratory glassware of its own production. Accepts orders and carries them out in strict accordance with the customer’s technical specifications. The Richter Absorber Primelab is available in high-speed and small subtypes. Both are designed to purify liquids, gases and other impurities. The first is suitable for working with large volumes of gases or quick cleaning, and the second is for small volumes. They have an identical shape in the form of an elongated vessel with two spherical extensions at the top and two tubes. The Richter absorber was manufactured by Primelab from Czech borosilicate glass Simax, which is known for its strength and wear resistance. Suitable for use in various laboratories and small industries.