Primelab

The PrimeLab screw cap tube is designed for laboratory processes involving reagent transport, storage, mixing, experimentation and more. Made from durable borosilicate glass 3.3, which is suitable for working with aggressive, toxic and poisonous substances. The PrimeLab tube is intended for reusable use. Withstands high temperatures, including sterilization under different conditions. The diameter of the tube is 15 mm with a length of the entire product of 100 mm. Holds up to 10 ml of substance of any consistency.

Alonge AIO 29/32-19/26-65 TS Primelab is a strong, durable and reliable connecting component suitable for various laboratory installations and instruments. It has a side outlet and a curved shape with an inclination angle of 105°. At the end of the outlet there is an olive that provides a strong connection with the soft hose. Made from durable Simax borosilicate glass, which has proven itself in the best way during use. Has a long service life and excellent wear resistance. The total length of the device is 65 mm, of which 20 mm is on the narrow lower part with a diameter of 9 mm. The size of the coupling section is 19/26, and the core size is 29/32.

Richter absorber PrimeLab (high-speed) is a laboratory device for high-speed purification and absorption of gases. Its design consists of two spherical extensions. Two tubes are soldered into the top one: gas is released along the long one for purification, and through the second it comes out in a purified form. A high-speed Richter absorber was produced by Primelab from borosilicate glass. This determines the vessel’s ability to withstand the influence of different temperatures, strength and long service life. Does not react with chemically active substances. Thanks to transparency, you can observe all processes inside the vessel.

Bunsen flask 1-250 with tube and stopper 29 is suitable for working with any reagents whose volume does not exceed 250 ml. Suitable for filtering solutions under reduced pressure, and also as an intermediate tank between a steam source and a reflux condenser. Externally, it has the shape of a conical flask with a wide base and a narrow neck, as well as a side tube with olives. Thanks to the olives, a reliable connection with the soft hose of the auxiliary equipment is ensured. The height of the entire product is 16 centimeters.

Flat-bottomed flask P-2-1000-42 Primelab, TS is one of the most popular types of flasks for a wide range of laboratory processes. This is due to its successful form, which has many advantages. Among the main ones: • A flat bottom with a spherical shape, which allows you to place the flask on any flat surface without an additional stand. • Ball shape with a diameter of 131 mm, in which the entire contents are evenly heated and brought to a boil; • Narrow neck (diameter 42 mm), protecting against excessive evaporation when boiling. Designed to work with any substance whose volume does not exceed 1000 ml.

The chemical faucet made of borosilicate glass was manufactured by PrimeLab, which took into account all the subtleties of using the product. It has high thermal resistance and chemical inertness, suitable for working with various substances, including at high temperatures.

The glass spiral coil is manufactured by PrimeLab, a company that offers a variety of glassblowing services at different scales. This can be serial or single production. The glass spiral coil is an additional accessory for laboratory products designed to more effectively cool or heat liquids. Has the shape of a spiral. The coil is made of durable and heat-resistant borosilicate glass, so the product can be used at high temperatures. Has a long service life and good wear resistance.

Desiccator 2-180 mm Primelab does not have a tap. Made of light glass, which provides the ability to monitor in real time the state of substances inside the container. Suitable for storing and drying various substances. The desiccator is supplied complete with a porcelain ring with holes. It must be placed at the bottom of the dish and sprinkled with a desiccant, which will absorb all the moisture and dry the substances under vacuum conditions. Characteristics: • Volume – 3000 ml • Diameter – 180 mm.

Reagent jar, dark glass PrimeLab, 5000 ml is designed for efficient and safe work in a chemical laboratory, small production and more. Durable and opaque dark glass provides reliable protection against ultraviolet radiation, preventing oxidation and degradation of reagents. Characteristics: • Volume – 5000 ml • Height – 330 mm • Diameter – 186 mm • Thread - GL45.

Separating funnel VD-3-500 PrimeLab, pear-shaped - an indispensable tool in any laboratory. Designed for separation and filtration of various types of substances. Its pear-shaped shape allows the dosing and transfer of substances, ensuring the purity and efficiency of the entire process. Characteristics of the separating funnel VD-3-500: • Volume – 500 ml • Height – 330 mm • Spout length – 70 mm with a diameter of 12 mm.

A jar for reagents made of light glass PrimeLab, 500 ml is presented in the form of a container with a stable shape and a capacity scale for quickly determining the volume of contents. Designed for 500 ml. The neck with a diameter of 86 mm is equipped with a GL45 thread for screwing the cap included in the package. The total height of the can is 176 mm.

Vacuum membrane pump PL.HM04.02.01 PrimeLab is a compact laboratory device with which you can create a vacuum in the laboratory. It is equipped with innovative membrane technology that ensures high gas pumping speed. Suitable for pumping vapors and gases up to 1 mbar. The PL.HM04.02.01 pump has an excellent safety system. Protection against overheating and overload is provided. All contacting media are made of PTFE, which has rare chemical and physical properties. All control is carried out through vacuum control, which also ensures maximum accuracy and control of all operating parameters. It has a low noise level (75 dB), which does not cause discomfort to the working class.