Flat-bottomed flask P-2-2000-50 Primelab, TS

Tripod "workplace" for single and stripped 0.2 ml tubes, 96 seats

A non-standard technological solution is a universal laboratory product used when performing various processes or working with laboratory equipment. Manufactured by PrimeLab from durable borosilicate glass, which has a long service life, resistance to temperature changes and mechanical stress. Does not enter into chemical reactions with contacted substances. You can order any laboratory glassware from PrimeLab. It is manufactured in strict accordance with the customer’s drawings or technical specifications. The glassblowing workshop is ready to turn even the most non-standard solution into reality.

The flat-bottomed flask P-2-300-29 Primelab is made of light heat-resistant glass, which provides an overview of the processes occurring inside the product. Holds up to 300 ml of any substance with a ball diameter of 95 mm and a neck of 29 mm. The height of the entire product is 140 mm. Suitable for placement on any flat surface without an additional stand, while maintaining all the advantages of the spherical shape.

Laboratory funnel B-100-150 Primelab with a stem diameter of 13 mm is necessary for quickly pouring bulk substances and pouring liquid reagents into another container with a neck diameter of more than 13 mm. The height of the entire product is 150 mm. It is made of borosilicate glass 3.3, resistant to wear and minor mechanical damage.

Conical flask Kn-2-500-50 Primelab is a universal glass vessel used for various laboratory studies and reactions. These include filtration, mixing, storage, heating, cooling and other processes. It has a stable shape in the form of a narrow neck of 50 mm and a wide base of 105 mm. The flask is designed for 500 ml. The total height is 175 mm. Made from reliable and durable borosilicate glass. Thermally and chemically stable.

Склянка Тищенко – это специальная лабораторная емкость, которая используется для проведения процесса промывки газов через сыпучие вещества. Она позволяет эффективно очищать газы от примесей, а также подготавливать их для дальнейших исследований. Принцип работы склянки Тищенко основан на прохождении газа через слой сыпучего вещества, которое улавливает и удерживает нежелательные примеси. Благодаря своей конструкции, эта склянка обеспечивает равномерное распределение газов по всему объему сыпучего материала, что позволяет достичь максимальной эффективности промывки

Along JSC 14/23 - 14/23 Primelab is a special accessory that is used to connect various installations and secure exchange between them. Provides a tight connection. It has chemical and thermal resistance and tolerates temperature changes well. Made from borosilicate glass 3.3. Connection to auxiliary equipment is made using a coupling grind (14/23) and a core (14/23). The total length of the allonge is 90 mm with a diameter of 6 mm.

Колба плоскодонная П-2-50-22 Праймлаб из термостойкого стекла является надежным инструментом для выполнения различных химических реакций. В их числе смешивание, хранение, нагревание и охлаждение различных жидких составов. Вмещает до 50 мл веществ при высоте всего изделия в 100 мм. Диаметр шара равен 51 мм, а диаметр горлышка - 22 мм.

Petri dish PrimeLab 120 mm, glass - a small laboratory container with a small edge around the perimeter, made of tempered glass. Consists of two parts with the following features: • The diameter of the upper part is 129 mm with 120 mm of the lower part. • The height of the upper part is slightly lower than the height of the lower part, due to which the upper “lid” fits freely onto the base to protect the contents from the external environment and other microorganisms. • Glass thickness is 2 mm.

The VD-3-1000 PrimeLab pear-shaped separating funnel will help you quickly and effectively separate different types of substances, the volume of which does not exceed 1000 ml. Externally, it is pear-shaped with a core, tap and spout, the length of which is 70 mm with a total length of the entire funnel of 400 mm. The diameter of the spout is 12 mm, which is more than enough to work with substances of any consistency.

A dephlegmator with a cooling (heating) jacket with a tap system from Primelab is used in the distillation process to control and regulate temperature. Equipped with connection systems: core 60/46 and coupling 29/32. There are two tubes with olives at the end. Designed for connecting additional equipment such as distillation units. By using a jacketed dephlegmator for heating or cooling, it is possible to positively influence the final product in processes requiring precise thermal control.

The Tishchenko Primelab flask for flushing gases through liquid has a non-standard design. Two outlets with olives at the ends are soldered into the outer part, which provide a strong connection with the hoses. There is a partition in the middle of the container. It is thanks to this form that the quality of gas purification is improved. The main purpose of the bottle is washing, cleaning and drying gases. The Tishchenko flask was made by the Primelab company from borosilicate glass, which has a fairly long service life even with intensive use.

The PrimeLab dark glass reagent jar is designed to work with a small amount of a substance of any consistency (up to 250 ml). A capacity scale is applied to its wall to quickly determine the volume of the contents of the substance. Made of durable glass that is wear-resistant. Characteristics: • Volume – 250 ml • Height – 1386 mm • Diameter – 70 mm • Thread - GL45.

The PrimeLab light glass reagent jar, 250 ml, is designed taking into account the requirements of safety and ease of use. Comes complete with a lid that screws onto the neck thanks to a GL45 thread. Prevents the penetration of external substances into stored reagents. Characteristics: • Volume – 250 ml • Height –138 mm • Diameter – 70 mm.

The PrimeLab oxidizer is designed for oxidation, combustion of substances, research of organic compounds and various studies. Thanks to thermal and chemical resistance, it is perfectly suited for its tasks. The device has the shape of an elongated cylinder with a wider upper part and two tubes. At their ends there are olives that guarantee a strong connection with other equipment when using a soft hose. When working with an oxidizing agent, it is important to adhere to the instructions for use and safety rules. The oxidizing agent produced by PrimeLab is made of durable borosilicate glass, which has many advantages. You can place an order for these products, which will be completed in a short time without compromising quality.

Electrochemical cell made of borosilicate glass No. 2 PrimeLab has a fairly simple design, but despite this, it is suitable for carrying out a large list of electrochemical processes. Used in scientific laboratories and various industries. The cell is made of borosilicate glass of excellent quality, which has high chemical and thermal resistance. Thanks to complete transparency, it is possible to observe all processes taking place inside the cell.

The flat-bottomed flask P-2-3000-50 Primelab is made of borosilicate glass 3.3, which tolerates temperature changes well and does not enter into chemical reactions with reagents. Suitable for working with acids, alkalis and other aggressive substances. Its flat bottom ensures stability on heating plates, making it an ideal choice for heating processes. Characteristics of the flat-bottomed flask P-2-3000-50 Primelab: • Volume – 3000 ml • Height – 370 ml • Throat diameter – 50 ml • Ball diameter – 199 mm.