The Primelab company accepts orders for the manufacture of laboratory glassware and instruments of various shapes, including according to the customer’s technical specifications. Heat-resistant glass is used in this work. The Reberg high-speed absorber is designed for titration, impurity collection, gas purification and more. Made from high-grade chemical-resistant glass, which has a long service life and resistance to wear. The device is U-shaped. At the end of one side there is a spherical part, the neck of which is closed during the process with a suitable stopper. The second end has a standard shape. Quite easy to use and compatible with various equipment. It is especially effective when connecting several devices in series with each other using a rubber hose.

Bourdon Flask Primelab

Bourdon vessel, version 2. Made of borosilicate glass.

Primelab

Mytishchi

Produced in: Mytishchi, Moscow region

from 850 ₽

Mytishchi

Produced in: Mytishchi, Moscow region

from 628 ₽

Mytishchi

Produced in: Moscow region, Mytishchi

Absorber Zaitsev Primelab

from 1 600 ₽

The Zaitsev absorber is one of the laboratory products manufactured by PrimeLab from heat-resistant glass. Its main purpose is to purify gas mixtures or air from various impurities. It has good absorption and purification efficiency. The device has the shape of an elongated cylinder, the upper part of which is wider than the lower. A tube is horizontally soldered into the upper part, through which purified air comes out. The second tube is located vertically along the entire length of the cylinder. They are equipped with specialized olives that provide a stronger connection with soft hoses.

Mytishchi

Produced in: Mytishchi, Moscow region

Absorber Polezhaev (Kiselev) Primelab

from 4 340 ₽

The Polezhaev (Kiselev) absorber was made by Primelab in its own glass blowing shop. It is possible to manufacture laboratory glassware and instruments according to individual sizes and shapes of the customer in the shortest possible time. The Polezhaev (Kiselev) absorber is suitable for purifying gases and collecting impurities for analysis. It has a standard shape with an elongated cylinder and two tubes. It has a certain similarity with the Zaitsev absorber, but the long tube in the Polezhaev absorber can be removed, which simplifies the process of cleaning the body and working with the device as a whole. The absorber, like all laboratory glassware and accessories of the PrimeLab company, is made of durable high-grade glass.

Mytishchi

Produced in: Mytishchi, Moscow region

Absorber Polezhaev (Kiselev)

from 628 ₽

Mytishchi

Produced in: Mytishchi, Moscow region

Rehberg absorber (high-speed)

from 628 ₽

Mytishchi

Produced in: Moscow region, Mytishchi

Richter Absorber Primelab (high-speed)

Richter absorber PrimeLab (high-speed) is a laboratory device for high-speed purification and absorption of gases. Its design consists of two spherical extensions. Two tubes are soldered into the top one: gas is released along the long one for purification, and through the second it comes out in a purified form. A high-speed Richter absorber was produced by Primelab from borosilicate glass. This determines the vessel’s ability to withstand the influence of different temperatures, strength and long service life. Does not react with chemically active substances. Thanks to transparency, you can observe all processes inside the vessel.

Mytishchi

Produced in: Mytishchi, Moscow region

May be interested in

Tripod "workplace" for single and stripped 0.2 ml tubes, 96 seats

from 2 100 ₽

Tripod "workplace" for single and stripped 0.2 ml tubes, 96 seats

Berdsk

Produced in: Berdsk, Novosibirsk region

Laboratory funnel B-250-345 Primelab, stem diameter 24 mm

from 4 515 ₽

Laboratory funnel B-250-345 Primelab is made of borosilicate glass, which ensures the wear resistance of the product. Suitable for the break-even movement of substances of any consistency from one container to another. Characteristics of the B-250-345 Primelab laboratory funnel: • Funnel diameter – 250 mm • Height of the entire funnel – 345 mm • Stem diameter – 24 mm.

Mytishchi

Produced in: Mytishchi, Moscow region

Sanger-Black Primelab apparatus

The Sanger-Black Primelab apparatus is a compact laboratory equipment that consists of several parts. This is a 100 ml flat-bottomed flask, a nozzle with a core, a rubber stopper and a pestle that fits through the stopper. The first and second parts are connected to each other using a 19/26 joint, which corresponds to GOST 8682-93. The equipment is designed for the quantitative determination of arsenic. The result of the reaction is a compound that produces color. The device is made of borosilicate glass and high-quality materials by Primelab. Its dimensions: 64x230 mm. It can be produced according to individual customer specifications.

Mytishchi

Produced in: Mytishchi, Moscow region

Along AIO 29/32-19/26-65 TS Primelab

from 1 523 ₽

Alonge AIO 29/32-19/26-65 TS Primelab is a strong, durable and reliable connecting component suitable for various laboratory installations and instruments. It has a side outlet and a curved shape with an inclination angle of 105°. At the end of the outlet there is an olive that provides a strong connection with the soft hose. Made from durable Simax borosilicate glass, which has proven itself in the best way during use. Has a long service life and excellent wear resistance. The total length of the device is 65 mm, of which 20 mm is on the narrow lower part with a diameter of 9 mm. The size of the coupling section is 19/26, and the core size is 29/32.

Mytishchi

Produced in: Mytishchi, Moscow region

Along JSC 14/23 - 14/23 Primelab

Along JSC 14/23 - 14/23 Primelab is a special accessory that is used to connect various installations and secure exchange between them. Provides a tight connection. It has chemical and thermal resistance and tolerates temperature changes well. Made from borosilicate glass 3.3. Connection to auxiliary equipment is made using a coupling grind (14/23) and a core (14/23). The total length of the allonge is 90 mm with a diameter of 6 mm.

Mytishchi

Produced in: Mytishchi, Moscow region

Glass reactor RGPF II from Primelab made of borosilicate glass

The glass reactor RGPF II from Primelab is a laboratory device of a non-standard shape. The design contains several sections necessary to create the required conditions in laboratory processes. There are two side outlets, at the ends of which olives are provided for a reliable and durable connection to the equipment using soft hoses. The glass reactor RGPF II is a development of the Primelab company, which produces laboratory glassware and instruments to order according to the customer’s technical specifications. The conditions and terms of production depend on the volume of work.

Mytishchi

Produced in: Mytishchi, Moscow region

Laboratory funnel B-75-110 Primelab, stem diameter 9 mm

from 171 ₽

Laboratory funnel B-75-110 Primelab has a conical shape with an elongated stem. Its diameter is 9 mm, which is enough to work with substances of any consistency. The diameter of the funnel itself is 75 mm with a length of the entire product of 110 mm. Designed for pouring or pouring substances into another container.

Mytishchi

Produced in: Mytishchi, Moscow region

Along AIO-29/32-14/23-50 TS, GOST 25336-82 Primelab

from 1 313 ₽

Alonge AIO-29/32-14/23-50 TS is a curved connecting element with a bend, manufactured in the glass blowing shop of the Primelab company in accordance with GOST 25336-82. It is characterized by chemical inertness and high wear resistance. The length AIO-29/32-14/23-50 is made from heat-resistant and chemically resistant glass. It has impeccable smoothness, due to which there is practically no precipitation inside after use. Specifications: • Coupling grind size - 14/23 • Core section size - 29/32 • The length of the lower part is 20 mm with a total length of 50 mm • Outlet diameter – 9 mm • Tilt angle - 105°.

Mytishchi

Produced in: Mytishchi, Moscow region

Test tube with screw cap PrimeLab, 10 ml, 15x100, round bottom

from 16 ₽

The PrimeLab screw cap tube is designed for laboratory processes involving reagent transport, storage, mixing, experimentation and more. Made from durable borosilicate glass 3.3, which is suitable for working with aggressive, toxic and poisonous substances. The PrimeLab tube is intended for reusable use. Withstands high temperatures, including sterilization under different conditions. The diameter of the tube is 15 mm with a length of the entire product of 100 mm. Holds up to 10 ml of substance of any consistency.

Mytishchi

Produced in: Mytishchi, Moscow region

125 ml dark glass reagent bottle with wide neck and ground-in Primelab stopper

from 261 ₽

A 125 ml dark glass reagent bottle with a wide neck and a ground stopper is a compact and convenient container for mixing and storing chemical reagents that need to be protected from ultraviolet rays. Its small volume makes it an ideal choice for conducting experiments and research with small amounts of substance. Characteristics: • Volume – 125 ml • Base diameter – 108 mm • Neck diameter – 38 mm • Height – 108 mm. The bottle is made of borosilicate glass, resistant to wear and mechanical stress. The included stopper allows you to seal the container hermetically.

Mytishchi

Produced in: Mytishchi, Moscow region

Flat-bottomed flask P-2-2000-50 Primelab, TS

from 788 ₽

The flat-bottomed flask P-2-2000-50 Primelab, TS is a popular laboratory product due to its successful shape. It has a flat, stable bottom with a spherical shape, which ensures uniform heating of the contents. Holds up to 2000 ml of any substance, thanks to the relatively wide neck diameter (50 mm). The diameter of the entire ball is 166 mm with a height of 250 mm.

Mytishchi

Produced in: Mytishchi, Moscow region

Primelab filtration apparatus, 1000 ml flask

The PrimeLab Filtration Apparatus, 1000 ml flask is a unit designed to separate solids or sediment from a liquid by using a filter disc connected to a funnel and securing them in an adapter. It is made of reliable and transparent borosilicate glass. Thanks to this, you can monitor all processes inside the device. The device package includes the following parts: • Receiving flask; • Cylindrical funnel (300 ml); • Filter and clamp; • Adapter with outlet. The volume of the filtrate receiver is 1 liter.

Mytishchi

Produced in: Mytishchi, Moscow region

Bunsen flask 1-10000 Primelab TS, height 450 mm

from 4 074 ₽

Bunsen flask 1-10000 Primelab TS, height 450 mm - laboratory container for vacuum filtration and other laboratory processes. Made from high strength technical glass. The volume is 10 liters with a height of the entire product of 45 centimeters. There is a side outlet with a diameter of 13 mm.

Mytishchi

Produced in: Mytishchi, Moscow region

Reagent jar, dark glass PrimeLab, 20000 ml

Reagent Jar, Dark Glass PrimeLab, 20000 ml is designed to meet laboratory safety standards, providing reliable protection against possible hazards and elementary leakage. It has a form convenient for work. There is a measuring scale and an area for notes on the wall. Characteristics: • Volume – 5000 ml • Height – 505 mm • Diameter – 299 mm • Thread - GL45.

Mytishchi

Produced in: Mytishchi, Moscow region

Flask KN-2-250-34 Primelab

The KN-2-250-34 flask is manufactured by Primelab from light borosilicate glass, thanks to which you can observe all the processes inside the flask. Does not react with chemically active and toxic substances. It is highly durable and resistant to intensive use. The flask has a conical shape with a wide base (85 mm) and a narrow neck (34 mm) with a height of the entire accessory of 145 mm. Holds up to 250 ml of any substance.

Mytishchi

Produced in: Mytishchi, Moscow region

Jacketed U-shaped cell for Primelab laboratory setup

The PrimeLab jacketed U-shaped cell is designed to heat or cool a liquid to control cell temperature. Made of transparent borosilicate glass. Suitable for working with chemically active and corrosive substances, as it does not react with them. The cell has a universal shape, which was well thought out by Primelab specialists during production. At the same time, other services for glassblowing production of various glass equipment are available according to the parameters required by the customer.

Mytishchi

Produced in: Mytishchi, Moscow region

Chemical faucet made of borosilicate glass Primelab

The chemical faucet made of borosilicate glass was manufactured by PrimeLab, which took into account all the subtleties of using the product. It has high thermal resistance and chemical inertness, suitable for working with various substances, including at high temperatures.

Mytishchi

Produced in: Mytishchi, Moscow region