Catalog
Ultraviolet bactericidal installation for emergency disinfection of both air and indoor surfaces in the absence of people (DESAR-OMEGA-02-"KRONT")
Product of the day
from
480000.00
KRONT
Химки
Back to search results
Conical flasks with thread GL18 Primelab
Back to search results
Conical flasks with thread GL18 Primelab
Conical flasks with thread GL18 Primelab are functional and reliable instruments that are an integral part of any laboratory and beyond. Suitable for a wide range of applications, including heating reagents, storing, mixing, carrying out reactions, etc. The conical shape ensures stability on an equal surface, uniform mixing of substances and improved heat transfer, which is important when carrying out certain chemical reactions. The presence of a GL18 thread makes it possible to securely close the flask and prevent leakage of substances. PrimeLab GL18 threaded conical flasks are made of borosilicate glass. They have chemical resistance, high strength and resistance to intensive use.
Conical flask Kn-2-250-50 Primelab
from
189 ₽
The conical flask Kn-2-250-50 Primelab is made of transparent borosilicate glass, which ensures control of all processes inside the container. Suitable for storage, heating, cooling, filtration and other laboratory processes. Characteristics of the Kn-2-250-50 flask: • Volume – 250 ml • Neck diameter – 504 mm • Base diameter – 64 mm • Height – 140 mm. It has a stable base that prevents the flask from tipping over. The neckline has rounded edges.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Conical flask KN-1-500-29/32 with Primelab divisions, GOST 25336-82
from
494 ₽
Conical flask KN-1-500-29/32 with divisions complies with GOST 25336-82. Made of transparent borosilicate glass, which allows you to observe all the processes inside. A capacity scale is applied to its wall, allowing you to determine the volume of contents in a matter of seconds. A ground joint (29/32) is provided on the neck, with which the equipment can be securely attached to the flask. The volume is 500 ml with a height of 165 mm. The diameter of the base is 105 mm.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Flasks made of fluoroplast-4
FIRST FLUOROPLASTIC PLANT
Kirovo-Chepetsk
Produced in: Kirov region, Kirovo-Chepetsk
Conical flask KN-1-100-29/32 with divisions Primelab, TS
from
355 ₽
Conical flask KN-1-100-29/32 with Primelab divisions is intended for laboratory processes. Designed to work with liquid substances whose volume does not exceed 100 ml. For accurate measurements, a measuring scale is applied to the wall. The flask is made of heat-resistant glass in an easy-to-use form with a stable base. A grinding joint is provided with which the flask is securely attached to the equipment.
Characteristics:
• Base diameter - 64 mm
• Section size - 29/32
• Height - 105 mm.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Conical flask (Erlenmeyer) made of fluoroplast F-4MB
FIRST FLUOROPLASTIC PLANT
Kirovo-Chepetsk
Produced in: Kirov region, Kirovo-Chepetsk
Conical flask KN-2-2000-72 Primelab
from
945 ₽
Conical flask KN-2-2000-72 Primelab is a high-quality laboratory accessory made of heat-resistant borosilicate glass 3.3. It has an easy-to-work shape with a wide base of 131 mm and a relatively narrow neck of 72 mm. Designed to work with bulk and liquid substances, the volume of which does not exceed 2 liters. The total height of the flask is 280 mm.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Flask KN-2-250-34 Primelab
The KN-2-250-34 flask is manufactured by Primelab from light borosilicate glass, thanks to which you can observe all the processes inside the flask. Does not react with chemically active and toxic substances. It is highly durable and resistant to intensive use. The flask has a conical shape with a wide base (85 mm) and a narrow neck (34 mm) with a height of the entire accessory of 145 mm. Holds up to 250 ml of any substance.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Flask KN-2-50-22 Primelab, TS
from
139 ₽
The KN-2-50-22 flask is produced by the Primelab company from heat-resistant glass that can withstand temperature changes. It can store reagents, heat, cool, mix and carry out other laboratory processes. Characteristics of the conical flask: • Volume - 50 ml • Base diameter - 51 mm • Neck diameter - 22 mm • Height - 90 mm. Thanks to the wide base, it is extremely difficult to tip the flask over.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Conical flask KN-2-500-34 Primelab
from
256 ₽
The conical flask KN-2-500-34 Primelab is made of borosilicate glass, resistant to temperature changes. Designed for chemical reactions in laboratory conditions, including storage, mixing, heating, cooling and more. Has the following characteristics:
• Volume – 500 ml
• Neck diameter – 34 mm
• Base diameter – 105 mm
• Height – 180 mm.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Conical flask KN-1-1000-29/32 with Primelab divisions, GOST 25336-82
from
630 ₽
Conical flask KN-1-1000-29/32 with Primelab divisions is a laboratory glassware that is suitable for working with chemically active substances. Designed for laboratory processes involving storage, mixing, heating, cooling, etc. Complies with GOST 25336-82. It has a conical flask with an easy-to-work shape. With a wide base of 131 mm, a narrow neck with a grind size of 29/32 is provided. The height of the dish is 210 mm, and the volume is 1000 ml. There is a measuring scale on the wall.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Erlenmeyer conical flask, KN-2-5000 Primelab
from
1 344 ₽
Erlenmeyer conical flask, KN-2-5000 Primelab is an important accessory for any laboratory. Used for heating, mixing, storage and other processes. It has a stable shape in the form of a wide base (22 cm) and a narrow neck (5.5 cm). Designed for 5 liters. The total height of the flask is 36.5 cm. The accessory is made of reliable borosilicate glass, resistant to thermal and chemical influences.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Conical flask Kn-2-50-34 Primelab
from
119 ₽
Колба коническая Кн-2-50-34 Праймлаб – незаменимый аксессуар любой биологической, химической и прочих лабораторий. Несмотря на компактные габариты, имеет удобную форму в виде устойчивого основания (51 мм) и узкого горла (34 мм). Рассчитана на работу с жидкостями, объем которых не превышает 50 мл. Общая высота колбы равна 85 мм. Выполнена из прочного боросиликатного стекла.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Conical flask Kn-2-1000-50 Primelab
from
500 ₽
Conical flask Kn-2-1000-50 Primelab is a universal and important tool in a laboratory of any size and direction. Used for filtration, sediment separation, storage, heating, cooling or mixing of reagents. The flask is designed to work with 1 liter or less of any substance. Its characteristics:
• Neck diameter – 50 mm
• Base diameter – 131 mm
• Height – 220 mm.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Laboratory flask
from
121 ₽
The conical flask (Erlenmeyer) is designed for filtration, evaporation, distillation, distillation and synthesis in laboratory conditions. Variants of execution: Kn-2-100-22 TU 9464-019-29508133-2015 Book-2-100-34 TU 9464-019-29508133-2015 Book-2-1000-50 TU 9464-019-29508133-2015 Book-2-2000-50 TU 9464-019-29508133-2015 Book-2-25-22 TU 9464-019-29508133-2015 Book-2-250-34 TU 9464-019-29508133-2015 Kn-2-250-50 TU 9464-019-29508133-2015 Kn-2-3000-50 TU 9464-019-29508133-2015 Book-2-50-22 TU 9464-019-29508133-2015 Book-2-50-34 TU 9464-019-29508133-2015 Book-2-500-34 TU 9464-019-29508133-2015 Book-2-500-50 TU 9464-019-29508133-2015 Book-2-5000-50 TU 9464-019-29508133-2015
MiniMed
Suponevo
Produced in: Bryansk region
Conical flask Kn-2-100-34 Primelab
from
132 ₽
The conical flask Kn-2-100-34 Primelab is made of borosilicate glass 3.3, which perfectly withstands temperature changes, as well as working with acids, alkalis and other aggressive substances. Suitable for storage, filtration, heating, cooling, mixing and other laboratory processes. The Kn-2-100-34 Primelab flask has compact dimensions. The height is 105 mm with a base diameter of 64 mm and a neck of 34 mm. Designed for 100 ml of any substance.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Conical flask KN-1-250-29/32 with Primelab divisions, GOST 25336-82
from
418 ₽
Conical flask KN-1-250-29/32 with divisions, GOST 25336-82 Primelab is actively used in laboratories and industries. Main purpose: storage, filtration, heating, mixing or diluting reagents, cooling and more. Borosilicate glass is absolutely transparent, which allows you to observe all processes inside the flask. A capacity scale is applied to the wall, with which you can easily determine the volume of the contents of the substance. Maximum volume – 250 ml.
Characteristics:
• Section size – 29/32
• Base diameter – 85 mm
• Height – 128 mm.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Tripod "workplace" for single and stripped 0.2 ml tubes, 96 seats
from
2 100 ₽
Tripod "workplace" for single and stripped 0.2 ml tubes, 96 seats
VIS MED
Berdsk
Produced in: Berdsk, Novosibirsk region
Conical flask Kn-2-250-50 Primelab
from
189 ₽
The conical flask Kn-2-250-50 Primelab is made of transparent borosilicate glass, which ensures control of all processes inside the container. Suitable for storage, heating, cooling, filtration and other laboratory processes. Characteristics of the Kn-2-250-50 flask: • Volume – 250 ml • Neck diameter – 504 mm • Base diameter – 64 mm • Height – 140 mm. It has a stable base that prevents the flask from tipping over. The neckline has rounded edges.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Transition with Primelab vacuum valve
The adapter with a Primelab vacuum valve is one of the most popular devices used in creating a vacuum system and working in vacuum conditions. It can be used to regulate the flow of gas or air. Used to connect equipment or create a vacuum. The device is equipped with a grinding core NS 19/26 and a vacuum valve with olive for reliable connection with a soft hose or other equipment. The transition is made of borosilicate glass, making it suitable for operation at different temperatures. Even with intensive use it has a long service life and wear resistance.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Tishchenko flask for flushing gases through Primelab liquid
The Tishchenko Primelab flask for flushing gases through liquid has a non-standard design. Two outlets with olives at the ends are soldered into the outer part, which provide a strong connection with the hoses. There is a partition in the middle of the container. It is thanks to this form that the quality of gas purification is improved. The main purpose of the bottle is washing, cleaning and drying gases. The Tishchenko flask was made by the Primelab company from borosilicate glass, which has a fairly long service life even with intensive use.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
250 ml reagent bottle made of light glass with a wide neck and ground-in Primelab stopper
from
258 ₽
A 250 ml reagent bottle made of light glass with a wide neck and a ground-in stopper PrimeLab is a reliable container for storing, transporting or mixing substances of different consistencies. Thanks to the wide neck (5 cm), bulk substances and liquid reagents can be easily placed into it. The total height is 13 cm with a base diameter of 7 cm. The ground stopper included is suitable for firmly closing the container, which will protect the contents from leakage and evaporation. The bottle is made of borosilicate glass 3.3, so it can be sterilized in different ways for reusable use.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Conical flask KN-1-500-29/32 with Primelab divisions, GOST 25336-82
from
494 ₽
Conical flask KN-1-500-29/32 with divisions complies with GOST 25336-82. Made of transparent borosilicate glass, which allows you to observe all the processes inside. A capacity scale is applied to its wall, allowing you to determine the volume of contents in a matter of seconds. A ground joint (29/32) is provided on the neck, with which the equipment can be securely attached to the flask. The volume is 500 ml with a height of 165 mm. The diameter of the base is 105 mm.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
500 ml reagent bottle made of light glass with a narrow neck and ground-in Primelab stopper
from
258 ₽
A 500 ml light glass reagent bottle with a narrow neck and a ground stopper is designed for storage, transportation, mixing and other laboratory processes. Supplied complete with a ground-in stopper, ensuring a tight connection with the bottle.
Characteristics:
• Volume – 500 ml
• Base diameter – 85 mm
• Throat diameter – 33 mm
• Height – 172 mm.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Primelab water jet pump (various options)
from
3 518 ₽
The PrimeLab water jet pump is a simple but effective laboratory device for pumping air from an evaporator, reactor and other equipment, as well as creating a vacuum without connecting to an electrical network. For operation, the use of water supply is sufficient. The pump is made of tempered heat-resistant glass, which ensures a long service life in the absence of serious mechanical damage. At the top of the pump there is a tube to which a soft hose is attached. Through it, water enters the water jet pump. There is a drain pipe at the bottom through which the water drains. A device is connected to the side tube in which it is necessary to pump out the air.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Flat-bottomed flask P-2-3000-50 Primelab, TS
from
1 680 ₽
The flat-bottomed flask P-2-3000-50 Primelab is made of borosilicate glass 3.3, which tolerates temperature changes well and does not enter into chemical reactions with reagents. Suitable for working with acids, alkalis and other aggressive substances. Its flat bottom ensures stability on heating plates, making it an ideal choice for heating processes.
Characteristics of the flat-bottomed flask P-2-3000-50 Primelab:
• Volume – 3000 ml
• Height – 370 ml
• Throat diameter – 50 ml
• Ball diameter – 199 mm.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Bunsen flask 2-500-29/32 with Primelab tube, HS
from
1 662 ₽
Bunsen flask 2-500-29/32 with tube PrimeLab, XC is a reliable laboratory vessel with a flat bottom and a side tube with three olives. There is a 29/32 grind, thanks to which the flask can be connected to laboratory equipment for carrying out the necessary processes. The Bunsen flask 2-500-29/32 holds no more than 500 ml with a total height of 170 mm. The diameter of the base is 105 mm.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Flat-bottomed flask P-2-5000-55 Primelab, TS
from
2 310 ₽
Flat-bottomed flask P-2-5000-55 Primelab is designed to work with large amounts of substance (up to 5,000 ml). Suitable for storage, uniform heating or cooling of contents, mixing and other laboratory processes. It has the shape of a ball with a flat, stable bottom, so the flask does not require specialized stands.
Characteristics of the P-2-5000-55 Primelab flask:
• Ball diameter - 235 mm
• Neck diameter - 55 mm
• Height of the flask - 400 mm
• Volume - 5 l.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Electrochemical cell made of borosilicate glass No. 2 Primelab
Electrochemical cell made of borosilicate glass No. 2 PrimeLab has a fairly simple design, but despite this, it is suitable for carrying out a large list of electrochemical processes. Used in scientific laboratories and various industries. The cell is made of borosilicate glass of excellent quality, which has high chemical and thermal resistance. Thanks to complete transparency, it is possible to observe all processes taking place inside the cell.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Flat-bottomed flask P-1-100 29/32 Primelab, TS
from
389 ₽
The flat-bottomed flask P-1-100 29/32 Primelab TS is made of heat-resistant glass that can withstand high temperatures. It can be sterilized in various ways, including in an autoclave. Holds up to 100 ml of any substance, securely attaches to laboratory equipment using a 29/32 joint. It has a spherical shape with a flat base and a height of 110 mm. The neck diameter is 65 mm.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Separating funnel VD-3-1000 Primelab, pear-shaped
from
1 491 ₽
The VD-3-1000 PrimeLab pear-shaped separating funnel will help you quickly and effectively separate different types of substances, the volume of which does not exceed 1000 ml. Externally, it is pear-shaped with a core, tap and spout, the length of which is 70 mm with a total length of the entire funnel of 400 mm. The diameter of the spout is 12 mm, which is more than enough to work with substances of any consistency.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Washing bottle with nozzle SN-1-100 Primelab, GOST 25336-82
The washing bottle with the nozzle SN-1-100 was manufactured by Primelab in accordance with GOST 25336-82. Made from thermally stable borosilicate glass, which is resistant to intensive use and wear. Has a long service life. Suitable for handling chemicals and autoclave sterilization. The washing bottle with the nozzle SN-1-100 is used for washing various equipment. The nozzle has several special holes for equal distribution of liquid. You can order washing bottles with a nozzle CH-1-100 from Primelab in any quantity. At the same time, impeccable quality of products is guaranteed.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Jar for Primelab reagents, light glass, nav. plast. cap, 100 ml
from
168 ₽
Alonge AIO 29/32-19/26-65 TS Primelab is a strong, durable and reliable connecting component suitable for various laboratory installations and instruments. It has a side outlet and a curved shape with an inclination angle of 105°. At the end of the outlet there is an olive that provides a strong connection with the soft hose. Made from durable Simax borosilicate glass, which has proven itself in the best way during use. Has a long service life and excellent wear resistance. The total length of the device is 65 mm, of which 20 mm is on the narrow lower part with a diameter of 9 mm. The size of the coupling section is 19/26, and the core size is 29/32.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Bunsen flask 1-5000 with Primelab tube, height 370 mm
from
2 730 ₽
The Bunsen flask 1-5000 with PrimeLab tube is made of durable laboratory glass, resistant to mechanical stress and intensive use. It has a conical shape with a wide base and a narrow neck, as well as a side tube (diameter 11 mm). The height of the entire product is 37 centimeters. Holds up to 5 liters of any reagent. To use, just put a plug on the neck and a vacuum pump hose on the tube.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region