Catalog
Back to search results
Dephlegmator with cooling (heating) jacket with valve system, core 60/46, coupling 29/32. Primelab
Back to search results
Dephlegmator with cooling (heating) jacket with valve system, core 60/46, coupling 29/32. Primelab
A reflux condenser with a cooling (heating) jacket and a valve system is usually used in distillation plants to separate liquids with different boiling points. Core 60/46 and coupling 29/32 are the sizes and types of connecting parts of the dephlegmator. The 60/46 core indicates the diameter size of the internal part of the reflux condenser, where a connection of 60 mm external diameter and 46 mm internal diameter is used. The 29/32 coupling indicates the size of the connection hole or reflux condenser pipe, where a connection of 29mm outer diameter and 32mm inner diameter is used. Such connection sizes can be standard and determined in accordance with the technology and equipment used.
Tripod "workplace" for single and stripped 0.2 ml tubes, 96 seats
from
2 100 ₽
Tripod "workplace" for single and stripped 0.2 ml tubes, 96 seats
VIS MED
Berdsk
Produced in: Berdsk, Novosibirsk region
Tishchenko flask for flushing gases through Primelab liquid
The Tishchenko Primelab flask for flushing gases through liquid has a non-standard design. Two outlets with olives at the ends are soldered into the outer part, which provide a strong connection with the hoses. There is a partition in the middle of the container. It is thanks to this form that the quality of gas purification is improved. The main purpose of the bottle is washing, cleaning and drying gases. The Tishchenko flask was made by the Primelab company from borosilicate glass, which has a fairly long service life even with intensive use.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Primelab water jet pump (various options)
from
3 518 ₽
The PrimeLab water jet pump is a simple but effective laboratory device for pumping air from an evaporator, reactor and other equipment, as well as creating a vacuum without connecting to an electrical network. For operation, the use of water supply is sufficient. The pump is made of tempered heat-resistant glass, which ensures a long service life in the absence of serious mechanical damage. At the top of the pump there is a tube to which a soft hose is attached. Through it, water enters the water jet pump. There is a drain pipe at the bottom through which the water drains. A device is connected to the side tube in which it is necessary to pump out the air.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Bunsen flask 2-500-29/32 with Primelab tube, HS
from
1 662 ₽
Bunsen flask 2-500-29/32 with tube PrimeLab, XC is a reliable laboratory vessel with a flat bottom and a side tube with three olives. There is a 29/32 grind, thanks to which the flask can be connected to laboratory equipment for carrying out the necessary processes. The Bunsen flask 2-500-29/32 holds no more than 500 ml with a total height of 170 mm. The diameter of the base is 105 mm.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Electrochemical cell made of borosilicate glass No. 2 Primelab
Electrochemical cell made of borosilicate glass No. 2 PrimeLab has a fairly simple design, but despite this, it is suitable for carrying out a large list of electrochemical processes. Used in scientific laboratories and various industries. The cell is made of borosilicate glass of excellent quality, which has high chemical and thermal resistance. Thanks to complete transparency, it is possible to observe all processes taking place inside the cell.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Flat-bottomed flask P-1-100 29/32 Primelab, TS
from
389 ₽
The flat-bottomed flask P-1-100 29/32 Primelab TS is made of heat-resistant glass that can withstand high temperatures. It can be sterilized in various ways, including in an autoclave. Holds up to 100 ml of any substance, securely attaches to laboratory equipment using a 29/32 joint. It has a spherical shape with a flat base and a height of 110 mm. The neck diameter is 65 mm.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Washing bottle with nozzle SN-1-100 Primelab, GOST 25336-82
The washing bottle with the nozzle SN-1-100 was manufactured by Primelab in accordance with GOST 25336-82. Made from thermally stable borosilicate glass, which is resistant to intensive use and wear. Has a long service life. Suitable for handling chemicals and autoclave sterilization. The washing bottle with the nozzle SN-1-100 is used for washing various equipment. The nozzle has several special holes for equal distribution of liquid. You can order washing bottles with a nozzle CH-1-100 from Primelab in any quantity. At the same time, impeccable quality of products is guaranteed.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Bunsen flask 1-5000 with Primelab tube, height 370 mm
from
2 730 ₽
The Bunsen flask 1-5000 with PrimeLab tube is made of durable laboratory glass, resistant to mechanical stress and intensive use. It has a conical shape with a wide base and a narrow neck, as well as a side tube (diameter 11 mm). The height of the entire product is 37 centimeters. Holds up to 5 liters of any reagent. To use, just put a plug on the neck and a vacuum pump hose on the tube.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Primelab light glass reagent jar, 5000 ml
from
2 476 ₽
The PrimeLab light glass reagent jar is designed for 5000 ml. Presented in a classic form. The package also includes a lid that protects the contents from leakage and evaporation. There is a capacity scale on the wall.
Characteristics:
• Volume – 5000 ml
• Height – 330 mm
• Diameter – 186 mm
• Thread - GL45.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
250 ml dark glass reagent bottle with wide neck and ground-in Primelab stopper
from
368 ₽
A 250 ml dark glass reagent bottle with a wide neck and a ground stopper. PrimeLab is a specialized glass vessel made of borosilicate glass, suitable for storing and transporting chemically active substances. These can be liquids, samples, evaporating substances, etc. Made of borosilicate glass 3.3. Does not react with them.
Characteristics:
• Volume – 250 ml
• Base diameter – 70 mm
• Throat diameter – 58 mm
• Height – 130 mm.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Desiccator 2-210 mm Primelab, without tap, light glass
from
2 730 ₽
Desiccator 2-210 mm PrimeLab is made of light glass and does not have a tap. Designed to store and protect samples in a laboratory environment. Reliable design and precise humidity control create optimal conditions for specific tasks. It has compact dimensions: the diameter is 210 mm and the height is 275 mm, of which 95 are on the lid.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
A type of Liebig Primelab refrigerator
A variation of the Liebig refrigerator is produced by PrimeLab. Designed for distillation, distillation, condensation and more. It has a standard design consisting of two glass tubes, one of which is located inside the other. Water is poured into the outer tube, and vapor condenses in the inner tube, after which it flows down. The Primelab company accepts orders for the manufacture of laboratory glassware and instruments, including Liebig refrigerators. We use exclusively high-quality borosilicate glass.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Schlenk filter/Schlenk flask Primelab
The Schlenk filter / Schlenk flask PrimeLab is a reliable laboratory instrument consisting of 3 components. Manufactured by PrimeLab from durable borosilicate glass, which provides thermal and chemical resistance. Suitable for high temperature applications. Fairly easy to use and install. Used in chemical reactions to isolate contents from air. Schlenk filter / Schlenk flask can be ordered from Primelab, whose range of services includes the production of high-quality laboratory glassware made of borosilicate glass.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Laboratory funnel B-75-110 Primelab, stem diameter 9 mm
from
171 ₽
Laboratory funnel B-75-110 Primelab has a conical shape with an elongated stem. Its diameter is 9 mm, which is enough to work with substances of any consistency. The diameter of the funnel itself is 75 mm with a length of the entire product of 110 mm. Designed for pouring or pouring substances into another container.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Refrigerator XSh-1-300 29/32 Primelab
from
1 223 ₽
Refrigerator KhSh-1-300 29/32 Primelab is designed for cooling liquids and performing some laboratory processes. With compact dimensions of 46 cm and a working part of 30 cm, it has excellent performance. Cooling occurs not only due to the movement of liquid along the balls inside the refrigerator, but also due to the influence of running water moving along the jacket. Equipped with a 29/32 core section for connection to the necessary laboratory equipment.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Laboratory funnel B-250-345 Primelab, stem diameter 24 mm
from
4 515 ₽
Laboratory funnel B-250-345 Primelab is made of borosilicate glass, which ensures the wear resistance of the product. Suitable for the break-even movement of substances of any consistency from one container to another. Characteristics of the B-250-345 Primelab laboratory funnel:
• Funnel diameter – 250 mm
• Height of the entire funnel – 345 mm
• Stem diameter – 24 mm.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Laboratory funnel B-56-80 Primelab, stem diameter 8 mm
from
132 ₽
Laboratory funnel B-56-80 Primelab is designed for breaking-even transfer of substances from one container to another. It is actively used not only in laboratories, but also in industries, scientific organizations, etc. The funnel has the shape of a cone with an angle of 60° and a diameter of 56 mm with a height of the entire product of 80 mm. There is a small stem with a diameter of 8 mm.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region