Catalog
Ultraviolet bactericidal installation for emergency disinfection of both air and indoor surfaces in the absence of people (DESAR-OMEGA-02-"KRONT")
Product of the day
from
480000.00
KRONT
Химки
Back to search results
LB-1K laminar flow microbiological Safety box
Back to search results
LB-1K laminar flow microbiological Safety box
• OKP code 94 4370
• The color of the box is resistant to treatment with desolutions.
• Number of filtration degrees: 1 or 2
• Pre-filter class according to GOST R 51251-99: G4
• HEPA filter class according to GOST R 51251-99: N14
• Efficiency of air purification from suspended particles larger than 0.2 microns (MPPS) according to GOST R 51251-99 (EN1812) for a filter of class H14: 99.995%
• Air purity class of the working area according to GOST R ISO 14644-1-2002 (in particles of 0.5 microns): 5ISO
• Protection class (according to WHO classification): IIA
• Total air capacity: 1350 m3/hour
• Capacity for air entering the working chamber of the box: adjustable, from 400 to 900 m3/hour
• Recycling rate: 80%
• The air flow rate in the working area is adjustable: from 0.2 to 0.45 m/s
• The internal chamber of high pressure is surrounded on all sides by zones of low pressure relative to atmospheric pressure
• UV lamp power of the working chamber: 30 W
• Sound power level of the laminar flow box: no more than 57 dBA
• Illumination of the working area of the laminar flow box: at least 1000 Lux
• Shadowless lighting of the working area of the laminar flow box: combined
• Flat removable sectional table top made of AISI304 stainless steel
• The front glass is made of polycarbonate resistant to UV radiation
• Suspended front window with lifting and stopping at any level
• Nameplate panel with a w/c screen indicating the activation of the product systems, a timer for the operation of the UFO working chamber, a counter for the operation of the UFO, a clock, a technological timer, an automatic air flow maintenance system
• The control panel is located outside the work area, which provides easy access during repairs and no contact with potentially dangerous agents in the duct and air purification system
• Sockets in the work area: 2 pcs. One outlet is controlled by the time set from the controller keyboard
• Power consumption: 210W
• Weight of the box: no more than 120 kg
• Dimensions of the working chamber of the laminar flow box (WxDxH): 1160x570x630 mm
• External dimensions of the laminar flow box (WxDxH): 1200x670x1270 mm
• Dimensions of the stand (WxDxH): 1200x670x650 mm
• Warranty period: 18 months from the date of delivery and acceptance of the product
• Package dimensions (WxDxH): 1290x780x1370 mm
• The color of the box is resistant to treatment with desolutions.
• Number of filtration degrees: 1 or 2
• Pre-filter class according to GOST R 51251-99: G4
• HEPA filter class according to GOST R 51251-99: N14
• Efficiency of air purification from suspended particles larger than 0.2 microns (MPPS) according to GOST R 51251-99 (EN1812) for a filter of class H14: 99.995%
• Air purity class of the working area according to GOST R ISO 14644-1-2002 (in particles of 0.5 microns): 5ISO
• Protection class (according to WHO classification): IIA
• Total air capacity: 1350 m3/hour
• Capacity for air entering the working chamber of the box: adjustable, from 400 to 900 m3/hour
• Recycling rate: 80%
• The air flow rate in the working area is adjustable: from 0.2 to 0.45 m/s
• The internal chamber of high pressure is surrounded on all sides by zones of low pressure relative to atmospheric pressure
• UV lamp power of the working chamber: 30 W
• Sound power level of the laminar flow box: no more than 57 dBA
• Illumination of the working area of the laminar flow box: at least 1000 Lux
• Shadowless lighting of the working area of the laminar flow box: combined
• Flat removable sectional table top made of AISI304 stainless steel
• The front glass is made of polycarbonate resistant to UV radiation
• Suspended front window with lifting and stopping at any level
• Nameplate panel with a w/c screen indicating the activation of the product systems, a timer for the operation of the UFO working chamber, a counter for the operation of the UFO, a clock, a technological timer, an automatic air flow maintenance system
• The control panel is located outside the work area, which provides easy access during repairs and no contact with potentially dangerous agents in the duct and air purification system
• Sockets in the work area: 2 pcs. One outlet is controlled by the time set from the controller keyboard
• Power consumption: 210W
• Weight of the box: no more than 120 kg
• Dimensions of the working chamber of the laminar flow box (WxDxH): 1160x570x630 mm
• External dimensions of the laminar flow box (WxDxH): 1200x670x1270 mm
• Dimensions of the stand (WxDxH): 1200x670x650 mm
• Warranty period: 18 months from the date of delivery and acceptance of the product
• Package dimensions (WxDxH): 1290x780x1370 mm
Biosafety cabinet BA-Safe 180
The Class II Type A2 biological safety cabinets are designed to reduce the risk of infection to the operator during work with dangerous or potentially dangerous microorganisms and to protect the specimen, is the result of the production of biological safety cabinets based on user feedback.
Technical specifications
Voltage, frequency,
230V ±10%/Hz
Engine
1-phase 230 V, 50 Hz, speed 1150 rpm
UV lamp
TUV UV lamp, UV lamp timer, 6000 hours of operation
Wavelength 254 nm
Number of LEDs, pcs
at least 380
Lighting power, 55 W
Work area illumination
at least 1500 lux, brightness adjustable, color of luminous flux 6000 K (cold white light)
Internal dimension of the working area, at least 1830×504 mm
Working height of front screen elevation, 200 mm
Max. height of front screen elevation, 510 mm
Frontal screen position alarm
Audible position warning.
Warning appears on display
Outer dimension, mm
1968,5х766,2х1506,6
Height of base, mm
690
BELAKVILON
Minsk
Produced in: Belarus, Minsk
LB-1 laminar microbiological safety box
• OKP code 94 4370
• The color of the box is resistant to treatment with desolutions.
• Number of filtration degrees: 1 or 2
• Pre-filter class according to GOST R 51251-99: G4
• HEPA filter class according to GOST R 51251-99: N14
• The degree of purification of the emitted air from suspended particles larger than 0.2 microns: 99.995%
• Air purity class of the working area according to GOST R ISO 14644-1-2002 (by particles 0.5 microns): 5ISO
• Protection class (according to WHO classification): IIA
• Total air capacity: 1350 m3/h
• Capacity for air entering the working chamber of the box: adjustable, from 400 to 900 m3/h
• Recycling rate: 80%
• The air flow rate in the working area is adjustable: from 0.2 to 0.45 m/s
• The internal chamber of high pressure is surrounded on all sides by zones of low pressure relative to atmospheric
• Power of the UV lamp of the working chamber: 30 W
• Sound power level of the laminar box: no more than 57 dBA
• Illumination of the working area of the laminar box: at least 1000 Lux
• Shadowless lighting of the working area of the laminar box
• Suspended front window with lifting and stopping at any level
• The control panel is located outside the working area, which provides easy access during repairs and no contact with potentially dangerous agents in the duct system and air purification
• Sockets in the work area: 2 pcs
• Power consumption: 210W
• Weight of the box: no more than 120 kg
• Dimensions of the working chamber of the laminar box (WxDxH): 1160x570x630 mm
• External dimensions of the laminar box (WxDxH): 1200x670x1270 mm
• Equipped with a stand table
• Dimensions of the stand (WxDxH): 1200x670x650 mm
• Continuous operation time is unlimited
• Warranty period: 18 months from the date of delivery and acceptance of the product
• Package dimensions (WxDxH): 1290x780x1370 mm
Prointekh
Pushchino
Produced in: Moscow region, Pushchino
Biosafety cabinet BA-Safe 150
Biosafety cabinet Belaquilon BA-safe 150 (for biological protection).
The Class II Type A2 biological safety cabinets are designed to reduce the risk of infection to the operator during work with dangerous or potentially dangerous microorganisms and to protect the specimen, is the result of the production of biological safety cabinets based on user feedback.
Technical specifications
Voltage, frequency,
230V ±10%/Hz
Engine
1-phase 230 V, 50 Hz, speed 1150 rpm
UV lamp
TUV UV lamp, UV lamp timer, 6000 hours of operation
Wavelength 254 nm
Number of LEDs, pcs
at least 380
Lighting power, 55 W
Work area illumination
at least 1500 lux, brightness adjustable, color of luminous flux 6000 K (cold white light)
Internal dimension of the working area, at least 1530×504 mm
Working height of front screen elevation, 200 mm
Max. height of front screen elevation, 510 mm
Frontal screen position alarm
Audible position warning.
Warning appears on display
Outer dimension, mm
1668.5x766.2x1506.6
Height of base, mm
690
BELAKVILON
Minsk
Produced in: Belarus, Minsk
Biosafety cabinet BA-Safe 90
Distinctive features of biological safety cabinet of ODO "BELAKVILON"
four versions with different working area widths: 90, 120, 150, 180;
ease of operation and ease of operation;
highly efficient shadowless diffused panoramic illumination of increased brightness (at least 1500 lux) with brightness adjustment for comfortable operation;
a stable air barrier and a constant downward flow in the work area ensures maximum protection of personnel and the sample. These conditions are constantly monitored by automation;
the front screen is made of 6 mm tempered glass with 2 handles and a tilt angle of 10°, with 20 cm (available 16– 25 cm) working lifting height;
the front working glass has no edge, which allows you to observe the working process without interference;
availability of all spare parts in stock (including metal body panels and glass).
BELAKVILON
Minsk
Produced in: Belarus, Minsk
Biosafety cabinet BA-Safe 120
Technical specifications
Voltage, frequency, V/Hz
230V ±10%/Hz
Engine
1-phase 230 V, 50 Hz, speed 1150 rpm
UV lamp
TUV UV lamp, UV lamp timer, 6000 hours of operation
Wavelength 254 nm
Number of LEDs, pcs
at least 380
Lighting power, 55 W
Work area illumination
at least 1500 lux, brightness adjustable, color of luminous flux 6000 K (cold white light)
Internal dimension of the working area, at least 1230×504 mm
Working height of front screen elevation, 200 mm
Max. height of front screen, 510 mm
Frontal screen position alarm
Audible position warning.
Warning appears on display
Outer dimension, mm
1368.5x766.2x1506.6
Height of base, mm
690
BELAKVILON
Minsk
Produced in: Belarus
Biosafety cabinet BA-Safe 180
The Class II Type A2 biological safety cabinets are designed to reduce the risk of infection to the operator during work with dangerous or potentially dangerous microorganisms and to protect the specimen, is the result of the production of biological safety cabinets based on user feedback.
Technical specifications
Voltage, frequency,
230V ±10%/Hz
Engine
1-phase 230 V, 50 Hz, speed 1150 rpm
UV lamp
TUV UV lamp, UV lamp timer, 6000 hours of operation
Wavelength 254 nm
Number of LEDs, pcs
at least 380
Lighting power, 55 W
Work area illumination
at least 1500 lux, brightness adjustable, color of luminous flux 6000 K (cold white light)
Internal dimension of the working area, at least 1830×504 mm
Working height of front screen elevation, 200 mm
Max. height of front screen elevation, 510 mm
Frontal screen position alarm
Audible position warning.
Warning appears on display
Outer dimension, mm
1968,5х766,2х1506,6
Height of base, mm
690
BELAKVILON
Minsk
Produced in: Belarus, Minsk
Freeze dryer LS-500
• The frozen product is placed in the dryer in stainless steel trays, or in separate containers with a flat bottom up to 105 mm high (test tubes, ampoules, vials, vials, cones, Petri dishes, glass laboratory glasses, etc.). A low-temperature chamber must be provided for freezing the product.
• Drying speed of at least 100 g/h.
• Additional devices: - manifold with vacuum taps for drying from flasks; - centrifuge for drying in ampoules; - collector with taps for sealing ampoules in vacuum; - low temperature trap;
• The temperature of the condenser is -50 °C (5 ° C), the capacity is 6 kg of ice.
• The working pressure in the vacuum chamber of the dryer is 6.67 Pa (5•10-2 mmHg), a vacuum pump with a gas ballast device.
• Adjustable shelf temperature from -15°C to +45°C. • Monitoring of vacuum parameters and temperature of the condenser and the product.
• Continuous operation time of at least 30 hours.
• The dryer is powered by a three-phase 380 V AC mains. The power consumption is 1.3 kW. • External dimensions: 590x660x820 mm, weight 120 kg.
Prointekh
Pushchino
Produced in: Moscow region, Pushchino
RBC-1 POZIS recirculator
from
11 577 ₽
Capacity, m3/h
70
Bactericidal efficiency, %
95
Total power of UV radiation of bactericidal lamps, W, not less
11
Service life of UV lamps, hours
9000
Power consumption, W,
45±5
Adjusted sound power level, no more
than 40 dBA
Germicidal UV light lamps of the LUV35/2G11 type, with a power of 35 W
1 pc
Dimensions (H*W*D), mm
406*291*211mm (with stand); 406x291x153 mm (without stand)
Weight, kg, no more
than 3.6
Warranty, years
2
Approximate dimensions of the product with packaging
Net weight of the product, kg
3.6
Gross weight of the product, kg
4.25
Volume of packaging, m3
0.033
Length of the package, m
0,47
Width of the package, m
0,35
Height of the package, m
0,20
POZIS
Зеленодольск
Produced in: Zelenodolsk, Tatarstan
Sigmed MC-02 Microcentrifuge
The centrifuge is designed in two versions:
- Version 1: maximum rotor speed at 8000 rpm (6000 x G)
- Version 2: maximum rotor speed at 12000 rpm (9000 x G)
RPM and casting g-load are displayed on the readout
PAO PZ "SIGNAL"
Obninsk
Produced in: Kaluga region, Obninsk
Magnetic stirrer without heating PL-R-basic, working volume 10 liters Primelab
from
21 600 ₽
The mixer operates in a speed range from 50 to 1500 rpm, the maximum heating temperature of the working surface is 500 °C. The heating plate includes a base made of stainless steel and a working surface made of fire-resistant glass (glass ceramics). At temperatures above +550 °C, automatic overheating protection is triggered and turns off the heating. The device is equipped with an LCD screen to display set and actual temperatures, rotation speeds and additional animated icons.
There is a timer for the specified operating time of the mixer; its maximum value is 990 minutes.
There is a function for automatic detection of armature rotation failure. When the device detects an armature failure, the rotation stops. Then rotation resumes, but the speed is reduced by 10%, followed by restoration of the rotation speed to the user-specified parameters. A stall occurs if the armature becomes disengaged with the stirrer magnet and stops rotating. Disruption can occur for various reasons: the rotation speed is too high, the viscosity of the medium has changed during the mixing process, etc.
When the power of the device is turned off, the set values of temperature, speed, timer time and the mode of detection (determination) of failure of armature rotation are stored in non-volatile memory.
The armature rotation speed and heating temperature are set using two rotating knobs.
Characteristics
Motor power 16 W
Range of operating speeds of the motor shaft, 200-1500 rpm
Discreteness of setting the specified speed of rotation of the motor shaft, 10 rpm
Resolution of displayed motor shaft rotation speed, 10 rpm
Connection – external temperature sensor PT1000 (sold separately)
Power consumption, 20 W
Dimensions, weight
Overall dimensions LxWxH, 380x220x120mm
Working surface size, LxW, 200x200mm
Maximum anchor length, 80mm
Device weight 4.4 kg
Contents of delivery
Stirrer without heating PL-R-basic
Operating manual combined with passport
Anchor for stirrer in fluoroplastic sheath 8*50 mm
Power cable with Euro plug
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
HK-400-2 POZIS Blood storage refrigerator
from
55 311 ₽
Total volume, l.
400
Number of compressors, pcs.
1
Height, mm
1950
Depth, mm
610
Width, mm
600
Weight, kg., no more
72
Rated power consumption, W
300
Maximum rated power, W
315
Voltage,
220 V
Warranty,
1 year
Final report on pre-qualification for compliance with the requirements of Good Practice of the EAEU Distribution: yes
Additional transparent doors that prevent unwanted air exchange between compartments.
Cold storage
Auto refrigerator defrosting system
Temperature in the refrigerator, °C
+2...+6
Accuracy of temperature maintenance
±2°C
thermal card: yes
Efficiency and energy consumption
Electricity consumption, kWh/day, no more
than 1.42
Climate class
UHL 4.2 (i.e. for moderate and cold climate)
Frequency, Hz
50
Approximate dimensions of the product with packaging
Net weight of the product, kg
72
Gross weight of the product, kg
76.5
Volume of packaging, m3
0.827
The length of the package, m
0.65
The width of the package, m
0.63
The height of the packaging, m
2.02
POZIS
Зеленодольск
Produced in: Zelenodolsk, Tatarstan
Freeze dryer LS-1000
For vacuum dewatering of pre-frozen substances with condensation of evaporated moisture on a low-temperature condenser, the company "Prointech" offers a new FREEZE DRYER LS-1000. (RF Patent No. 2213916 of 06/18/2011)
Characteristic features
- the shortest trajectory of vapors
- visual inspection of the product
- minimum volume to achieve rapid pumping to vacuum
- sterilizable stainless steel chamber
- compactness, lightness
Prointekh
Pushchino
Produced in: Moscow region, Pushchino
Quattroplex Lab multiplex analyzer, 1 х 96-well plate, with peripheral devices
from
6 500 000 ₽
QuattroPlex is the first Russian open multiplex platform for quantitative and qualitative analysis of biomarkers using immunofluorescence analysis on fluorescent beads. The detection technology copies xMap technology, which allows the analysis of several dozen analytes in a minimum volume. The device allows you to analyze a wide range of markers and is designed to work with 96-well plates.
Advantages of QuattroPlex Lab:
Technical characteristics of QuattroPlex Lab:
Delivery set:
Advantages of QuattroPlex Lab:
- Multiplexity - diagnostics of up to 50 markers in one sample in one analysis;
- analysis of a wide range of markers (rheumatology, autoimmune diseases, HLA, cytokines, infections);
- open system - use of any test systems based on magnetic beads;
- high sensitivity - the ability to conduct qualitative and quantitative analysis;
- design that requires minimal space on the desktop;
- possibility of using a 96-well plate for protocol scaling.
Technical characteristics of QuattroPlex Lab:
- Detected bead size, microns - from 0.5 to 100;
- 3 fluorescence detection channels;
- fluorescence excitation wavelengths, nm - from 380 to 850;
- fluorescence detection wavelengths, nm - from 450 to 950;
- detector - CMOS matrix;
- sample volume, µl - from 100;
- number of samples studied - 96 (96-well plate);
- the ability to load several 96-well plates in one experiment;
- time to analyze one sample, sec - 40;
- Software for managing and analyzing results - QuattroPlex software for processing and analyzing results, compatible with Win/Linux;
- interfaces for connecting to a laptop/PC - Internet/Wi-Fi;
- dimensions W×D×H, cm - 20×30×60.
Delivery set:
- QuattroPlex multiplex biomarker analysis system;
- starter kit of consumables;
- computer, keyboard, mouse and monitor.
Aivok
Zelenograd
Produced in: Zelenograd
ORB-1N POZIS recirculator
from
14 664 ₽
Capacity, m3/h
100
Bactericidal efficiency, %
99.9
Total power of ultraviolet radiation of bactericidal lamps, W, not less
14.4
Service life of UV lamps, hours
9000
Power consumption, W,
62±10
Adjusted sound power level, no more
than 40 dBA
Bactericidal UV light lamp LUV 15W, with a power of 15W
3 pcs
Dimensions (H*W*D), mm
886*366*163
Weight, kg, no more
7
Warranty, years
2
Approximate dimensions of the product with packaging
Net weight of the product, kg
7
Gross weight of the product, kg
7,8
Volume of packaging, m3
0.068
Length of the package, m
0.92
Width of the package, m
0,41
The height of the package, m
0.18
POZIS
Зеленодольск
Produced in: Zelenodolsk, Tatarstan
Smear painting device automatic portable "Pros-Ap"-01 MiniMed
from
120 000 ₽
It is intended for painting blood smears or other biological preparations on slides - slides by the group method (slides are placed in holders) according to a given technological program in diagnostic and research laboratories.
Cassettes with fixed slides successively go through 5 working stages:
1) Pre-drying of freshly prepared preparations;
2) Fixation with pre-painting;
3) Basic coloring;
4) Flushing;
5) Drying.
The cassettes are moved to the next position by the forward-return movement of the trays. The time of each stage is the same. It can be set when ordering the device. Factory setting – 5 minutes. The total duration of all stages is 20 minutes.
The coloring process is carried out along a linear trajectory. Slides with a smear should be placed in special cassettes and fixed by turning the eccentric lever. Fill the baths with reagents and install them in the device at the specified places. Place the slide cassette on the pre-drying starting position. If the preparations are dry, the cassette with slides should be immediately placed in a bath with a retainer. The time of each stage is 5 minutes. The whole procedure of painting and drying takes no more than 20 minutes. With sequential installation, the device can process up to 12 cassettes, i.e. up to 120 slides per hour.
MiniMed
Suponevo
Produced in: Bryansk region
ORBI-2P-TVES UV-bactericidal universal Air Recirculator irradiator
from
13 500 ₽
TVES
Tulinovka
Produced in: Tambov Region, Tulinovka
ORBI-4P-TVES UV-bactericidal universal Air Recirculator irradiator
from
16 500 ₽
TVES
Tulinovka
Produced in: Tambov Region, Tulinovka