RBC-1 POZIS recirculator

The Class II Type A2 biological safety cabinets are designed to reduce the risk of infection to the operator during work with dangerous or potentially dangerous microorganisms and to protect the specimen, is the result of the production of biological safety cabinets based on user feedback. Technical specifications Voltage, frequency, 230V ±10%/Hz Engine 1-phase 230 V, 50 Hz, speed 1150 rpm UV lamp TUV UV lamp, UV lamp timer, 6000 hours of operation Wavelength 254 nm Number of LEDs, pcs at least 380 Lighting power, 55 W Work area illumination at least 1500 lux, brightness adjustable, color of luminous flux 6000 K (cold white light) Internal dimension of the working area, at least 1830×504 mm Working height of front screen elevation, 200 mm Max. height of front screen elevation, 510 mm Frontal screen position alarm Audible position warning. Warning appears on display Outer dimension, mm 1968,5х766,2х1506,6 Height of base, mm 690

• The frozen product is placed in the dryer in stainless steel trays, or in separate containers with a flat bottom up to 105 mm high (test tubes, ampoules, vials, vials, cones, Petri dishes, glass laboratory glasses, etc.). A low-temperature chamber must be provided for freezing the product.  • Drying speed of at least 100 g/h.  • Additional devices: - manifold with vacuum taps for drying from flasks; - centrifuge for drying in ampoules; - collector with taps for sealing ampoules in vacuum; - low temperature trap; • The temperature of the condenser is -50 °C (5 ° C), the capacity is 6 kg of ice.  • The working pressure in the vacuum chamber of the dryer is 6.67 Pa (5•10-2 mmHg), a vacuum pump with a gas ballast device.  • Adjustable shelf temperature from -15°C to +45°C. • Monitoring of vacuum parameters and temperature of the condenser and the product. • Continuous operation time of at least 30 hours. • The dryer is powered by a three-phase 380 V AC mains. The power consumption is 1.3 kW. • External dimensions: 590x660x820 mm, weight 120 kg.

The open system allows you to work with reagents and laboratory plastics from various manufacturers Russian-language software Modifications: - COLIBRI 24 - the ability to select from 1 to 24 samples - COLIBRI 48 - the ability to select from 1 to 48 samples - COLIBRI 96 - the ability to select from 1 to 96 samples Range of working volumes: - COLIBRI 24 - 200 – 5000 mkl - COLIBRI 48 - 30 – 1000 mkl - COLIBRI 96 - 20 – 1000 mkl A unique format of consumable plastic - 8-hole strips and combs Two built-in thermostats The accuracy of temperature maintenance is ± 1 °C Heating/cooling - up to 100 °C / up to 35 °C Universal Thermostat Tube Unit Built-in computer Ready-made allocation protocols The time of one extraction cycle is from 11 minutes Built-in bactericidal UV lamp for interior treatment

Technical specifications: Methods of analysis optical density, endpoint, kinetics, fixed time, nonlinear, two-wave, turbidimetry Light source halogen lamp (12 V, 20 W) with a slow start system to increase the service life Built-in interference light filters 340, 405, 505, 546, 578, 630nm; spectral half-width 12 nm The optical density measurement range is 0-2.5 E.O.P. The measurement error of optical transmission is not more than 1 % Memory of 100 measurement programs Temperature control of the measuring cell built-in thermostat with Peltier element: 25, 30, 37 ° C; accuracy ± 0.2 ° C Sample incubation thermostat external, for 16 vials The volume of the flow cell is 32 µl Consumption of the working reagent from 250 µl Built-in matrix printer, printing on plain paper with a tape width of 56 mm Liquid crystal display: 4 lines of 20 characters each Productivity of up to 100 analyses/hour by the endpoint method Dimensions and weight no more than 355x355x185 mm; 8.5 kg

Total volume, l. 400 Number of compressors, pcs. 1 Height, mm 1950 Depth, mm 610 Width, mm 600 Weight, kg., no more 72 Rated power consumption, W 300 Maximum rated power, W 315 Voltage, 220 V Warranty, 1 year Final report on pre-qualification for compliance with the requirements of Good Practice of the EAEU Distribution: yes Additional transparent doors that prevent unwanted air exchange between compartments. Cold storage Auto refrigerator defrosting system Temperature in the refrigerator, °C +2...+6 Accuracy of temperature maintenance ±2°C Thermal card: yes Efficiency and energy consumption Electricity consumption, kWh/day, no more than 1.42 Climate class UHL 4.2 (i.e. for moderate and cold climate) Frequency, Hz 50 Approximate dimensions of the product with packaging Net weight of the product, kg 72 Gross weight of the product, kg 76.5 Volume of packaging, m3 0.827 The length of the package, m 0.65 The width of the package, m 0.63 The height of the package, m 2.02

The centrifuge is designed in two versions: - Version 1: maximum rotor speed at 8000 rpm (6000 x G) - Version 2: maximum rotor speed at 12000 rpm (9000 x G) RPM and casting g-load are displayed on the readout

Total volume, l. 400 Number of compressors, pcs. 1 Height, mm 1950 Depth, mm 610 Width, mm 600 Weight, kg., no more 72 Rated power consumption, W 300 Maximum rated power, W 315 Voltage, 220 V Warranty, 1 year Final report on pre-qualification for compliance with the requirements of Good Practice of the EAEU Distribution: yes Additional transparent doors that prevent unwanted air exchange between compartments. Cold storage Auto refrigerator defrosting system Temperature in the refrigerator, °C +2...+6 Accuracy of temperature maintenance ±2°C thermal card: yes Efficiency and energy consumption Electricity consumption, kWh/day, no more than 1.42 Climate class UHL 4.2 (i.e. for moderate and cold climate) Frequency, Hz 50 Approximate dimensions of the product with packaging Net weight of the product, kg 72 Gross weight of the product, kg 76.5 Volume of packaging, m3 0.827 The length of the package, m 0.65 The width of the package, m 0.63 The height of the packaging, m 2.02

It is intended for painting blood smears or other biological preparations on slides - slides by the group method (slides are placed in holders) according to a given technological program in diagnostic and research laboratories. Cassettes with fixed slides successively go through 5 working stages: 1) Pre-drying of freshly prepared preparations; 2) Fixation with pre-painting; 3) Basic coloring; 4) Flushing; 5) Drying. The cassettes are moved to the next position by the forward-return movement of the trays. The time of each stage is the same. It can be set when ordering the device. Factory setting – 5 minutes. The total duration of all stages is 20 minutes. The coloring process is carried out along a linear trajectory. Slides with a smear should be placed in special cassettes and fixed by turning the eccentric lever. Fill the baths with reagents and install them in the device at the specified places. Place the slide cassette on the pre-drying starting position. If the preparations are dry, the cassette with slides should be immediately placed in a bath with a retainer. The time of each stage is 5 minutes. The whole procedure of painting and drying takes no more than 20 minutes. With sequential installation, the device can process up to 12 cassettes, i.e. up to 120 slides per hour.

• OKP code 94 4370 • The color of the box is resistant to treatment with desolutions. • Number of filtration degrees: 1 or 2 • Pre-filter class according to GOST R 51251-99: G4 • HEPA filter class according to GOST R 51251-99: N14 • Efficiency of air purification from suspended particles larger than 0.2 microns (MPPS) according to GOST R 51251-99 (EN1812) for a filter of class H14: 99.995% • Air purity class of the working area according to GOST R ISO 14644-1-2002 (in particles of 0.5 microns): 5ISO • Protection class (according to WHO classification): IIA • Total air capacity: 1350 m3/hour • Capacity for air entering the working chamber of the box: adjustable, from 400 to 900 m3/hour • Recycling rate: 80% • The air flow rate in the working area is adjustable: from 0.2 to 0.45 m/s • The internal chamber of high pressure is surrounded on all sides by zones of low pressure relative to atmospheric pressure • UV lamp power of the working chamber: 30 W • Sound power level of the laminar flow box: no more than 57 dBA • Illumination of the working area of the laminar flow box: at least 1000 Lux • Shadowless lighting of the working area of the laminar flow box: combined • Flat removable sectional table top made of AISI304 stainless steel • The front glass is made of polycarbonate resistant to UV radiation • Suspended front window with lifting and stopping at any level • Nameplate panel with a w/c screen indicating the activation of the product systems, a timer for the operation of the UFO working chamber, a counter for the operation of the UFO, a clock, a technological timer, an automatic air flow maintenance system • The control panel is located outside the work area, which provides easy access during repairs and no contact with potentially dangerous agents in the duct and air purification system • Sockets in the work area: 2 pcs. One outlet is controlled by the time set from the controller keyboard • Power consumption: 210W • Weight of the box: no more than 120 kg • Dimensions of the working chamber of the laminar flow box (WxDxH): 1160x570x630 mm • External dimensions of the laminar flow box (WxDxH): 1200x670x1270 mm • Dimensions of the stand (WxDxH): 1200x670x650 mm • Warranty period: 18 months from the date of delivery and acceptance of the product • Package dimensions (WxDxH): 1290x780x1370 mm