Catalog
Back to search results
DOSIMETRIC GAMMA RADIATION DETECTION UNITS
Back to search results
DOSIMETRIC GAMMA RADIATION DETECTION UNITS
Gamma radiation Detection Units (BDKG-04, BDKG-22, BDKG-23, BDKG-23/1, BDKG-24, BDKG-25, BDKG-30, BDKG-32, BDKG-35, BDKG-36, BDKG-38, BDKG-204, BDKG-224, BDKG-230) are designed to use as part of stationary and mobile radiation monitoring posts and robotic devices for ground, aviation and marine applications.
Atom Fast 77100 - scintillation radiation detector and application with android
from
45 000 ₽
1 supp.
Overall dimensions of the device (mm) 113*25*14
The service life of the built-in battery is at least 300 cycles within the warranty period of the device
Full charge time The time to fully charge the built-in battery from a PC USB port or charger is no more than 4 hours.
Operating time from a fully charged built-in battery under natural radiation conditions without the use of sound/vibration alarms is at least 2 weeks. Maximum counting speed (imp/sec) is not less than 10,000 imp/s (600,000 imp/min).
Device weight (g) no more than 60
Note Atom Fast can withstand irradiation with a dose rate of up to 2000 R/h for 2 s without damage and fully restores functionality after cessation of irradiation in no more than 2 s.
Operating temperature range from -40 to +40 degrees. C (for the “new” detection block edition from the fall of 2019, the range is from -20 to +40). When the temperature rises above +40 degrees. C, the device will warn the user about this with the sound of a two-tone siren repeating once a minute. With a further increase in temperature, correct operation of the device is not guaranteed.
Energy range of recorded photon radiation (keV) is not less than 60 - 3000. Working size of scintillation detector (mm) 7.5*7.5*100
Contents of delivery
USB cable for charging the built-in lithium-ion battery 1 pc.
Dosimeter attachment Atom Fast 77100 - 1 pc.
Packing box 1 pc.
Carrying case - 1 pc.
NPP KB Radar
Troitsk
Produced in: Moscow, Troitsk
POWDIX 600 X-ray powder diffractometer
A feature of the POWDIX 600 X-ray diffractometer scheme is the vertical Bragg-Brentano optical scheme with a fixed horizontal sample position, which makes working with powdery materials, gels and other viscous substances more practical and convenient.
The high detector resolution and precise positioning of the POWDIX 600 X-ray goniometer achieve an accuracy better than +/- 0.02° (2θ) over the entire angular range.
In the POWDIX 600 diffractometer, the X-ray tube is cooled by an integrated closed water circuit, which can be serviced by any laboratory employee.
A wide variety of sample holders (holder for massive samples, holder with rotation, phoneless cuvettes) expands the functionality of the POWDIX 600 and makes it an invaluable tool for scientific research in solid-state physics, materials science, chemistry, geology and other fields of science
The diffractometer is included in the Russian State Register of Measuring Instruments.
ADVIN Smart Faktory
Minsk
Produced in: Belarus, Minsk
NEUTRON RADIATION DETECTION UNITS
Neutron radiation detection units (BDKN-01, BDKN-02, BDKN-03, BDKN-04, BDKN-05)
Atomtekh
Minsk
Produced in: Belarus, Minsk
SPECTROMETRIC GAMMA RADIATION DETECTION UNITS
Gamma radiation detection units (BDKG-05M, BDKG-11M, BDKG-19M, BDKG-201M, BDKG-203M, BDKG-205M, BDKG-211M, BDKG-219M) for use as part of stationary and mobile radiation monitoring posts and robotic devices for ground, aviation and marine applications
Atomtekh
Minsk
Produced in: Belarus, Minsk
Correlational leakage detector Iskor-205
from
319 800 ₽
Designed for:
– determining the location of liquid leakages from pipelines by the correlation method;
– tracing underground utilities;
– clarification of leakage sites by acoustic leak detector;
– creation of an information database on the condition of pipelines and the results of pipeline diagnostics.
TEKHNO-AS
Kolomna
Produced in: Kolomna, Moscow region
Vacuum and crimping chambers
Vacuum chambers can be used: for drying materials (low vacuum), testing spacecraft, during experiments on plasma retention and antimatter production, as elements of charged particle accelerator systems and systems for applying thin films.
Vacuum chambers can be used: for drying materials (low vacuum), testing spacecraft, during experiments on plasma retention and antimatter production, as elements of charged particle accelerator systems and systems for applying thin films.
NPO "Gelikon"
Saint Petersburg
Produced in: Saint Petersburg
Optical Transceiver SFP OC-3/STM-1/Fast Ethernet (155Mbps)
Optical transceivers are in standard SFP metal case with integrated optical input/output for SC,LC connectors for to transmit the signal over a single optical fiber.
FTI-Optronik
Saint Petersburg
Produced in: Saint Petersburg
Optical Transceiver SFP+ DAC
SFP+ Direct Attach Cable manufactured by Optronic is a passive Twinax cable with a length of 1 to 5 meters, the operating data transfer rate is up to 10 Gbits. SFP+ DAC are compatible with Ethernet equipment of such brands as Cisco, Extreme, Juniper, HP, Dell, Force10, Huawei, Dlink, etc.
FTI-Optronik
Saint Petersburg
Produced in: Saint Petersburg
SFP+ Transceiver
from
1 269 ₽
The "10GBASE-SR SFP+ Module" optical modules are capable of operating at a data transfer rate of up to 10 Gbit/s and are used in fiber-optic communication systems. They have a form factor similar to the previous SFP standard, namely, they have much smaller dimensions compared to other 10G transceivers. They can be installed on network equipment with a large number of ports.
FTI-Optronik
Saint Petersburg
Produced in: Saint Petersburg
Blue DPSS Laser 450 nm KLM-450-x
DPSS lasers of the KLM-450/x series are optimal sources of coherent radiation for the construction of control and automation systems, alignment and marking devices, for scientific and medical purposes.
Technical specifications
Radiation output power: up to 120W
Radiation wavelength: 450 nm
Output beam diameter: 1.5mm
Divergence of the radiation beam: 1.3 mrad
Instability of radiation power: 5%
Type of modulation: TTL or analog
Time to enter the mode: 15min
Spectral line width: 0.1nm
FTI-Optronik
Saint Petersburg
Produced in: Saint Petersburg
NGSH V1.3 x 0.65 low-temperature noise generator
Designed for:
use as the primary reference of the spectral power of the noise radio emission SPMSH in the frequency range 140-220 GHz;
use as a source of noise signal in the mm wavelength range for use with radio equipment;
measuring the noise coefficient of receivers, amplifiers, for tuning and adjusting electronic devices.
VNIIFTRI
Mendeleevo
Produced in: Mendeleevo, Moscow region
Red Laser Module KLM-M650-16-5 650nm 16mw with Modulation
from
6 711 ₽
KLM-M650-16-5 laser modules are optimal sources of coherent radiation for the construction of control and automation systems, alignment and marking devices, for scientific and medical purposes.
FTI-Optronik
Saint Petersburg
Produced in: Saint Petersburg
Blue DPSS Laser 415 nm KLM-415-x
DPSS lasers of the KLM-415/x series are optimal sources of coherent radiation for the construction of control and automation systems, alignment and marking devices, for scientific and medical purposes.
Technical specifications
Radiation output power: up to 10W
Radiation wavelength: 415 nm
Output beam diameter: 1.5mm
Divergence of the radiation beam: 1.3 mrad
Instability of radiation power: 5%
Type of modulation: TTL or analog
Time to enter the mode: 15min
Spectral line width: 0.1nm
FTI-Optronik
Saint Petersburg
Produced in: Saint Petersburg
Vacuum bellows valve
Vacuum valves are designed to cut off and seal the elements of the vacuum system, thereby, vacuum valves provide the necessary sequence of pumping and air intake. The vacuum valves presented in this section are mass-produced by NPO Helikon.
NPO "Gelikon"
Saint Petersburg
Produced in: Saint Petersburg
Trace searcher with the function of saving GPS/GLONASS coordinates Success AG-309.30K
from
244 260 ₽
The trace searching kit is designed to accurately determine the location and depth of underground utilities (power and signal cable lines, reinforced fiber-optic lines, pipelines made of electrically conductive materials), troubleshooting cable lines, and also allows you to conduct a survey of the area in the shortest possible time and with great reliability before excavation and to prevent damage to engineering communications.
As part of the kit, the receiver is in the form of a monoblock with a large LCD display, which displays an image of the route and automatically calculates the depth of communication up to 10 m, as well as the current in the line. Built-in GPS\GLONASS module for determining and recording the coordinates of the location of communication. "Probe" mode for tracing NON-METALLIC communications using an in-line generator (optional).
The kit is equipped with the latest compact autonomous generator AG-107 with built-in batteries, display and built-in induction antenna, for tracing communication in a contactless way.
The output power of the generator is up to 60 watts.
TEKHNO-AS
Kolomna
Produced in: Kolomna, Moscow region
Universal calibrator H4-301
Technical specifications:
Voltage reproduction range Uk 200 mV 0.07 + 0.01
DC: from 50 MV to 600 V, Uk 2 V 0.05 + 0.005
sub-bands (Uk) 200 mV; 2; 20; 200; 600 V Uk 20 V 0.05 + 0.005
Basic error, ± (% of U + % of Uk): Uk 200 V 0.07 + 0.01
Uk 600 V 0.1 + 0.02
Voltage reproduction range UK 200 mV 0.2 + 0.05
AC: from 1 mV to 600 V, Uk 2; 20 V 0.15 + 0.02
sub-bands (Uk) 200 mV; 2; 20; 200; 600 V from 20 Hz to 20 kHz
Basic error, ± (% of U + % of Uk): sv. 20 to 40 kHz 0.2 + 0.1
Uk 200 V; 600 V:
from 40 Hz to 1 kHz 0.2 + 0.05
Power reproduction range Ik 200 Ma 0.1 + 0.02
DC: from 1 Ma to 5 A, Ik 2; 20; 200 mA 0.1 + 0.01
sub-bands (Ik) 200 Ma; 2; 20; 200 mA; 2; 5 A Ik 2 A; 5 A 0.1 + 0.02
Basic error, ± (% of I + % of Ic):
AC power reproduction range: from 10 Ma to 5 A
sub-bands (Ic) 200 Ma; 2; 20; 200 mA; 2; 5 A 0.15 + 0.05
Frequency range from 20 Hz to 1 kHz
Basic error, ± (% of I + % of Ic):
USB interface
Operating temperature range from minus 10 °C to + 50 °C
Dimensions; weight 420×342×184.5 mm; 10 kg
MNIPI
Minsk
Produced in: Belarus, Minsk
Mobile Substation Laboratory TECHNOAS
The TECHNOAS substation laboratory consists of:
Test facility
• – Maximum rectified voltage up to 70 kV to 90 mA.
• – Maximum AC voltage of the industrial frequency of 50 Hz to 100 kV to 175 mA.
The IDP-10 dielectric loss meter unit is based on the Tangent-2000 meter and includes:
• – Power transformer parameter meter.
• – Measurement of losses and current XX.
• – Measurement of short circuit losses and voltage.
• – Determination of the transformation coefficient and the winding connection group.
• – Measurement of the resistance of the windings to direct current.
• – Formation of the test report.
A milliohmmeter
Measures DC resistance in inductive and non–inductive circuits in the range of 1 µΩ ÷ 10 kΩ at a current of 10A, as well as makes oscillograms of switching the contactor of a high-speed RPN device.
TEKHNO-AS
Kolomna
Produced in: Kolomna, Moscow region
DOSIMETRIC INSTALLATION OF GAMMA RADIATION UDG‑AT110
Irradiator with a typical collimator
Rotary drum magazine sources in tungsten and lead protection
Software control of the movement of sources and positioning of the mobile platform
An alarm and blocking system, radiation monitoring system to ensure the safety of the installation
Control from the operator panel or computer with verification automation functions
Atomtekh
Minsk
Produced in: Belarus, Minsk
PULSE RADIATION MONITORING SYSTEM
Logging data on dose rate levels and exceeding threshold levels
Software that allows you to display on a PC monitor the current radiation situation at a controlled facility
Backup power supply
High radiation resistance – at least 50,000 Sv for UDKG-37
Failure diagnostics
The possibility of using the system for dosimetric monitoring of both pulsed and continuous gamma radiation
The possibility of using the DKS-AT1123 dosimeter autonomously as a wearable device
Atomtekh
Minsk
Produced in: Belarus, Minsk
Trace Searcher with the function of saving GPS/GLONASS coordinates Success AG-309.15K
from
197 340 ₽
The trace searching kit is designed to accurately determine the location and depth of underground utilities (power and signal cable lines, reinforced fiber-optic lines, pipelines made of electrically conductive materials), troubleshooting cable lines, and also allows you to conduct a survey of the area in the shortest possible time and with great reliability before excavation and to prevent damage to engineering communications.
As part of the kit, the receiver is in the form of a monoblock with a large LCD display, which displays an image of the route and automatically calculates the depth of communication up to 10 m, as well as the current in the line.
Built-in GPS\GLONASS module for determining and recording the coordinates of the location of communication.
Compact stand-alone generator with display and built-in induction antenna. The output power of the generator is up to 20 watts and the range of operation is up to 3 km. Connection to the desired route is possible both by contact and contactless method.
TEKHNO-AS
Kolomna
Produced in: Kolomna, Moscow region
Salt electrode bath SHS 4.5.6/13
from
8 201 570 ₽
The product is designed for heating in liquid media of salts of parts for quenching, tempering, and normalization without oxidation in the temperature range from 700 OC to 1200 oC in stationary conditions. The environment of the workspace is a molten salt.
Salt electroplants are most often used in the heat treatment of tool steels for rapid heating for quenching and other types of processing with minimization of the decarbonized layer.
The electrode salt bath functions on the basis of the conductive properties of molten salts. From the power grid, the current flows through the transformer to the electrodes dipped in molten salt, and under this influence it heats up to the desired temperature.
Tula-Term
Tula
Produced in: Tula