Laboratory funnel B-100-150 Primelab, stem diameter 13 mm

Tripod "workplace" for single and stripped 0.2 ml tubes, 96 seats

Electrochemical cell made of borosilicate glass No. 2 PrimeLab has a fairly simple design, but despite this, it is suitable for carrying out a large list of electrochemical processes. Used in scientific laboratories and various industries. The cell is made of borosilicate glass of excellent quality, which has high chemical and thermal resistance. Thanks to complete transparency, it is possible to observe all processes taking place inside the cell.

The 20,000 ml clear glass reagent bottle with a narrow neck and ground-in stopper is made from high-quality 3.3 borosilicate glass. The main purpose is storage, transportation and mixing of substances. Suitable for working with poisonous, toxic and chemically active substances of any consistency. Their leakage and evaporation is prevented by a ground-in stopper firmly attached to the neck of the bottle. Characteristics: • Volume – 20 l. • Base diameter – 265 mm • Throat diameter – 62 mm • Height – 520 mm.

The flat-bottomed flask P-2-250-34 Primelab is made of technical glass. It has a spherical shape with a flat bottom that is convenient for work. Can be used without a specialized stand. The flat-bottomed flask has a long service life and is suitable for intensive use. Excellent for working with chemically active and toxic substances. Characteristics: • Volume – 250 ml • Height – 140 ml • Throat diameter – 34 ml • Ball diameter – 85 mm.

The Tishchenko flask for washing gases through bulk substances produced by the Primelab company is a laboratory container. It has a closed shape with oppositely located branches, at the ends of which there are small olives. Thanks to their presence, the bottle can be reliably and firmly connected to the equipment using a soft hose. There is a partition in the middle that does not reach the end. Flushing of gases is carried out when they pass through granular substances, where unwanted impurities are retained. The Tishchenko bottle is made from high-quality borosilicate glass. It has absolute transparency, which allows you to observe all processes inside the container.

A variation of the Liebig refrigerator is produced by PrimeLab. Designed for distillation, distillation, condensation and more. It has a standard design consisting of two glass tubes, one of which is located inside the other. Water is poured into the outer tube, and vapor condenses in the inner tube, after which it flows down. The Primelab company accepts orders for the manufacture of laboratory glassware and instruments, including Liebig refrigerators. We use exclusively high-quality borosilicate glass.

The Rotary Evaporator Trap is manufactured by PrimeLab for the purpose of collecting and condensing evaporative liquids during evaporation processes. Made of transparent borosilicate glass, which allows you to observe everything that happens inside the trap. 2 tubes with olives are soldered into the outer part of the trap for connection to other equipment. One of them is located at the top of the device, the second at the bottom. The PrimeLab company offers glassblowing services for the production of a wide variety of borosilicate glass products according to the customer’s specifications.

The PrimeLab oxidizer is designed for oxidation, combustion of substances, research of organic compounds and various studies. Thanks to thermal and chemical resistance, it is perfectly suited for its tasks. The device has the shape of an elongated cylinder with a wider upper part and two tubes. At their ends there are olives that guarantee a strong connection with other equipment when using a soft hose. When working with an oxidizing agent, it is important to adhere to the instructions for use and safety rules. The oxidizing agent produced by PrimeLab is made of durable borosilicate glass, which has many advantages. You can place an order for these products, which will be completed in a short time without compromising quality.

Refrigerator HSV-300-14/23-29/32 Primelab is a laboratory device used for condensation of vapors formed as a result of boiling of the mixture. Equipped with a core grind (29/32) and a coupling (14/23), from where water is supplied to the cylinder, around which steam circulates. From the outside, the cylinder is affected by the cold room temperature. This creates the conditions for combined cooling. There are a total of 16 turns in the spiral, and the body length is approximately 30 centimeters with a diameter of 40 mm. The refrigerator is made by Primelab from high-quality borosilicate glass, resistant to mechanical stress. It is wear-resistant and has a long service life. The refrigerator can be manufactured according to individual customer specifications.

Flask KN-2-1000-42 PrimeLab is an indispensable laboratory accessory used for heating, cooling, mixing, storage and other laboratory processes. Made from heat-resistant laboratory glass, resistant to high temperatures and chemically active substances. The transparency of the glass makes it possible to observe all the processes occurring inside the flask. Characteristics: • Height - 220 mm • Base diameter - 131 mm • Neck diameter - 42 mm • Volume - 1000 ml.

A non-standard technological solution is a universal laboratory product used when performing various processes or working with laboratory equipment. Manufactured by PrimeLab from durable borosilicate glass, which has a long service life, resistance to temperature changes and mechanical stress. Does not enter into chemical reactions with contacted substances. You can order any laboratory glassware from PrimeLab. It is manufactured in strict accordance with the customer’s drawings or technical specifications. The glassblowing workshop is ready to turn even the most non-standard solution into reality.

The Schlenk filter / Schlenk flask PrimeLab is a reliable laboratory instrument consisting of 3 components. Manufactured by PrimeLab from durable borosilicate glass, which provides thermal and chemical resistance. Suitable for high temperature applications. Fairly easy to use and install. Used in chemical reactions to isolate contents from air. Schlenk filter / Schlenk flask can be ordered from Primelab, whose range of services includes the production of high-quality laboratory glassware made of borosilicate glass.

Reagent jar, dark glass PrimeLab, 5000 ml is designed for efficient and safe work in a chemical laboratory, small production and more. Durable and opaque dark glass provides reliable protection against ultraviolet radiation, preventing oxidation and degradation of reagents. Characteristics: • Volume – 5000 ml • Height – 330 mm • Diameter – 186 mm • Thread - GL45.

Conical flask KN-1-1000-29/32 with Primelab divisions is a laboratory glassware that is suitable for working with chemically active substances. Designed for laboratory processes involving storage, mixing, heating, cooling, etc. Complies with GOST 25336-82. It has a conical flask with an easy-to-work shape. With a wide base of 131 mm, a narrow neck with a grind size of 29/32 is provided. The height of the dish is 210 mm, and the volume is 1000 ml. There is a measuring scale on the wall.

The glass reactor RGPF II from Primelab is a laboratory device of a non-standard shape. The design contains several sections necessary to create the required conditions in laboratory processes. There are two side outlets, at the ends of which olives are provided for a reliable and durable connection to the equipment using soft hoses. The glass reactor RGPF II is a development of the Primelab company, which produces laboratory glassware and instruments to order according to the customer’s technical specifications. The conditions and terms of production depend on the volume of work.

Refrigerator KhSh-1-300 29/32 Primelab is designed for cooling liquids and performing some laboratory processes. With compact dimensions of 46 cm and a working part of 30 cm, it has excellent performance. Cooling occurs not only due to the movement of liquid along the balls inside the refrigerator, but also due to the influence of running water moving along the jacket. Equipped with a 29/32 core section for connection to the necessary laboratory equipment.

A 30 ml dark glass reagent bottle with a wide neck and a ground-in PrimeLab stopper has excellent performance properties. Made from dark borosilicate glass, which is durable and long lasting. Suitable for storing items that need protection from ultraviolet exposure. Characteristics: • Volume – 30 ml • Base diameter – 40 mm • Throat diameter – 25 mm • Height – 72 mm.