Catalog
Back to search results
Primelab water jet pump (various options)
Back to search results
Primelab water jet pump (various options)
from
3 518 ₽
from
3 518 ₽
Go to the manufacturer's website
The PrimeLab water jet pump is a simple but effective laboratory device for pumping air from an evaporator, reactor and other equipment, as well as creating a vacuum without connecting to an electrical network. For operation, the use of water supply is sufficient. The pump is made of tempered heat-resistant glass, which ensures a long service life in the absence of serious mechanical damage. At the top of the pump there is a tube to which a soft hose is attached. Through it, water enters the water jet pump. There is a drain pipe at the bottom through which the water drains. A device is connected to the side tube in which it is necessary to pump out the air.
Suppliers have this product:
“KELTRUN” unit for the determination of nitrogen and protein mass fraction by Kjeldahl method by Sibagropribor
from
437 000 ₽
The Kjeldahl method is one of the most accurate methods for determining nitrogen and protein in a wide group of products, but, unfortunately, it has a number of significant drawbacks - these are low speed, a large number of possible losses during the analysis, bulky equipment, and the use of aggressive reagents. Sibagropribor Holding presents KELTRUN (KELTRUN) - a set of equipment for carrying out a complete analytical cycle according to the Kjeldahl method, which will allow: • to increase the speed of analyzes (high speed of distillation and ashing, simultaneous processing of several samples); • ensure the safety of personnel (high quality of reaction vessels, effective absorption of acid vapors by the exhaust system, additional protection of personnel in emergency situations); • reduce possible losses in the analysis process; • improve the reproducibility of results. «KELTRAN» (KELTRUN) will allow you to determine nitrogen / protein in the widest list of substances: • food products: dairy, cereals, meat, cereals, etc.; • feed and compound feed; • fertilizers; • water, drinks, beer; • soil, bottom sediments, sediment samples, activated sludge; • crude oil, lubricants; • various chemicals; • alcohol content in wines, musts and spirits; • etc. The set of equipment «KELTRAN» (KELTRUN) allows you to analyze according to GOST and determine the nitrogen content in the range of 0.02 - 99.00%. Composition of the complex «KELTRAN» (KELTRUN): - Digestor; - Distiller; - Scrubber (*not included in the price of the complex); - Titration unit: manual, semi-automatic or automatic (*not included in the price of the complex); Warranty - 1 year. Important feature! In many distillers (made in China and others), when used, alkali passes through a valve-type pump, with a low production resource (sometimes the resource is enough for only 3 months). In the distiller of our production, the alkali passes through a RELIABLE PERISTALTIC PUMP, this ensures a long service life of the distiller! Package options Cost (including VAT): Digestor, Distiller, Water jet pump 379,400 rubles; Digestor, Distiller, Water jet pump, Scrubber 434,700 rubles; Digestor, Distiller, Water jet pump, Manual titration unit 396,900 rubles; Digestor, Distiller, Water jet pump, Scrubber, Manual titration unit 452,200 rubles; Digestor, Distiller, Water jet pump, Kit «Titrion-pH» (c2) 605,400 rubles; Digestor, Distiller, Water jet pump, Scrubber, «Titrion-pH» kit (c2) 660,700 rubles.
SIBAGROPRIBOR
Krasnoobsk
Produced in: Novosibirsk region, Krasnoobsk
Tripod "workplace" for single and stripped 0.2 ml tubes, 96 seats
from
2 100 ₽
Tripod "workplace" for single and stripped 0.2 ml tubes, 96 seats
VIS MED
Berdsk
Produced in: Berdsk, Novosibirsk region
Dephlegmator with cooling (heating) jacket with valve system, core 60/46, coupling 29/32. Primelab
A reflux condenser with a cooling (heating) jacket and a valve system is usually used in distillation plants to separate liquids with different boiling points. Core 60/46 and coupling 29/32 are the sizes and types of connecting parts of the dephlegmator. The 60/46 core indicates the diameter size of the internal part of the reflux condenser, where a connection of 60 mm external diameter and 46 mm internal diameter is used. The 29/32 coupling indicates the size of the connection hole or reflux condenser pipe, where a connection of 29mm outer diameter and 32mm inner diameter is used. Such connection sizes can be standard and determined in accordance with the technology and equipment used.
Primelab
Mytishchi
Produced in: Mytishchi
Primelab filtration apparatus, 1000 ml flask
The PrimeLab Filtration Apparatus, 1000 ml flask is a unit designed to separate solids or sediment from a liquid by using a filter disc connected to a funnel and securing them in an adapter. It is made of reliable and transparent borosilicate glass. Thanks to this, you can monitor all processes inside the device.
The device package includes the following parts:
• Receiving flask;
• Cylindrical funnel (300 ml);
• Filter and clamp;
• Adapter with outlet. The volume of the filtrate receiver is 1 liter.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Schlenk filter/Schlenk flask Primelab
1 supp.
The Schlenk filter / Schlenk flask PrimeLab is a reliable laboratory instrument consisting of 3 components. Manufactured by PrimeLab from durable borosilicate glass, which provides thermal and chemical resistance. Suitable for high temperature applications. Fairly easy to use and install. Used in chemical reactions to isolate contents from air. Schlenk filter / Schlenk flask can be ordered from Primelab, whose range of services includes the production of high-quality laboratory glassware made of borosilicate glass.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Flat-bottomed flask P-2-1000-42 Primelab, TS
from
478 ₽
Flat-bottomed flask P-2-1000-42 Primelab, TS is one of the most popular types of flasks for a wide range of laboratory processes. This is due to its successful form, which has many advantages. Among the main ones: • A flat bottom with a spherical shape, which allows you to place the flask on any flat surface without an additional stand. • Ball shape with a diameter of 131 mm, in which the entire contents are evenly heated and brought to a boil; • Narrow neck (diameter 42 mm), protecting against excessive evaporation when boiling. Designed to work with any substance whose volume does not exceed 1000 ml.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Conical flask KN-2-500-34 Primelab
from
256 ₽
1 supp.
The conical flask KN-2-500-34 Primelab is made of borosilicate glass, resistant to temperature changes. Designed for chemical reactions in laboratory conditions, including storage, mixing, heating, cooling and more. Has the following characteristics:
• Volume – 500 ml
• Neck diameter – 34 mm
• Base diameter – 105 mm
• Height – 180 mm.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Conical flasks with thread GL18 Primelab
Conical flasks with thread GL18 Primelab are functional and reliable instruments that are an integral part of any laboratory and beyond. Suitable for a wide range of applications, including heating reagents, storing, mixing, carrying out reactions, etc. The conical shape ensures stability on an equal surface, uniform mixing of substances and improved heat transfer, which is important when carrying out certain chemical reactions. The presence of a GL18 thread makes it possible to securely close the flask and prevent leakage of substances. PrimeLab GL18 threaded conical flasks are made of borosilicate glass. They have chemical resistance, high strength and resistance to intensive use.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Conical flask KN-1-250-29/32 with Primelab divisions, GOST 25336-82
from
418 ₽
1 supp.
Conical flask KN-1-250-29/32 with divisions, GOST 25336-82 Primelab is actively used in laboratories and industries. Main purpose: storage, filtration, heating, mixing or diluting reagents, cooling and more. Borosilicate glass is absolutely transparent, which allows you to observe all processes inside the flask. A capacity scale is applied to the wall, with which you can easily determine the volume of the contents of the substance. Maximum volume – 250 ml.
Characteristics:
• Section size – 29/32
• Base diameter – 85 mm
• Height – 128 mm.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Flat-bottomed flask P-2-20000 Primelab, TS
from
6 195 ₽
The flat-bottomed flask P-2-20000 Primelab, TS has a shape that is suitable for work. The flat bottom provides good stability on any flat surface, and the spherical shape allows you to heat the entire contents of the product evenly. Suitable for various laboratory processes involving substances of any consistency, the volume of which does not exceed 20 liters. The flask is made of durable borosilicate glass, which is suitable for working with alkalis, acids and other aggressive substances.
Characteristics of the P-2-20000 Primelab flask:
• Ball diameter – 370 mm
• Throat diameter – 78 mm
• Height – 620 mm.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Desiccator 2-240 mm Primelab, without tap, dark glass
from
4 094 ₽
1 supp.
Desiccator 2-240 mm PrimeLab without tap is an ideal solution for protecting photosensitive samples from exposure to light. Designed for storing and drying various substances. The container is made of dark glass. It has compact dimensions: • The diameter of the desiccator is 240 mm • The height of the entire dish is 325 mm, of which 115 mm is on the lid. Supplied complete with a porcelain disc with holes made in it.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Primelab dark glass reagent jar, 2000 ml
A jar for reagents made of dark glass Primelab, 2000 ml is made taking into account all the subtleties of work in laboratories and other enterprises. It has a flat bottom, a tight-fitting lid, a measuring scale on the wall and an area for notes. The dark glass protects the contents from UV rays. Specifications:
• Volume – 2000 ml
• Height – 260 mm
• Diameter – 136 mm
• Thread - GL45.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Flask KN-2-250-34 Primelab
1 supp.
The KN-2-250-34 flask is manufactured by Primelab from light borosilicate glass, thanks to which you can observe all the processes inside the flask. Does not react with chemically active and toxic substances. It is highly durable and resistant to intensive use. The flask has a conical shape with a wide base (85 mm) and a narrow neck (34 mm) with a height of the entire accessory of 145 mm. Holds up to 250 ml of any substance.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Flat-bottomed flask P-1-1000-29/32 Primelab, diameter 140 mm
from
620 ₽
1 supp.
The flat-bottomed flask P-1-1000-29/32 Primelab is similar in all its advantages to the spherical shape. All its contents can be heated evenly and brought to a boil. At the same time, there is no need for a specialized stand for the spherical flask due to the flat, stable base. Suitable for working with liquid reagents and bulk substances due to the wide neck, the diameter of which is 140 mm. At the same time, there is a 29/32 grind on the neck, thanks to which the flask can be connected to laboratory equipment. The height of the entire product is 199 mm.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Tishchenko flask for flushing gases through Primelab liquid
1 supp.
The Tishchenko Primelab flask for flushing gases through liquid has a non-standard design. Two outlets with olives at the ends are soldered into the outer part, which provide a strong connection with the hoses. There is a partition in the middle of the container. It is thanks to this form that the quality of gas purification is improved. The main purpose of the bottle is washing, cleaning and drying gases. The Tishchenko flask was made by the Primelab company from borosilicate glass, which has a fairly long service life even with intensive use.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Tishchenko flask for flushing gases through Primelab bulk substances
The Tishchenko flask for washing gases through bulk substances produced by the Primelab company is a laboratory container. It has a closed shape with oppositely located branches, at the ends of which there are small olives. Thanks to their presence, the bottle can be reliably and firmly connected to the equipment using a soft hose. There is a partition in the middle that does not reach the end. Flushing of gases is carried out when they pass through granular substances, where unwanted impurities are retained. The Tishchenko bottle is made from high-quality borosilicate glass. It has absolute transparency, which allows you to observe all processes inside the container.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Test tube with screw cap PrimeLab, 10 ml, 15x100, round bottom
from
16 ₽
The PrimeLab screw cap tube is designed for laboratory processes involving reagent transport, storage, mixing, experimentation and more. Made from durable borosilicate glass 3.3, which is suitable for working with aggressive, toxic and poisonous substances. The PrimeLab tube is intended for reusable use. Withstands high temperatures, including sterilization under different conditions. The diameter of the tube is 15 mm with a length of the entire product of 100 mm. Holds up to 10 ml of substance of any consistency.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region