Catalog
Back to search results
MARS-AIT Automated current source
Back to search results
MARS-AIT Automated current source
Energoforma 3.3-120M AC and voltage source
Marsenergo
Saint Petersburg
Produced in: Saint Petersburg
AC voltage source B2-9
The source is capable of operating both independently and as part of automated measuring systems with interfaces such as RS-232 and ETHERNET.
Technical specifications
Output voltage setting range (SCR) from 25 to 250 V
The discreteness of the output voltage setting is 0.05 V
The frequency setting range of the output voltage is from 40 to 500 Hz
The discreteness of the output voltage frequency setting is 0.05 Hz
Output electrical power, not less than 1000 VA
The basic error of setting the output voltage is ± (0.005 Uv + 0.5 V)
The basic error of setting the output voltage frequency is ± 0.1 Hz
Additional error in setting the output voltage caused by a change in the load current from the maximum value to zero ± 0.5 V
Instability of the output voltage for any 10 minutes during 8 hours of continuous operation, no more than ± 0.5 V
Operating temperature range from minus 10 to 50 °C
AC power supply 220 V, 50 Hz
Power consumption, no more than 1300 VA
Overall dimensions, mm 343x160x352
Weight, not more than 6.5 kg
TEKHNOYAKS
Moscow
Produced in: Moscow
AC voltage source B2-7
The AC voltage source B2-7 is intended to provide devices and equipment with a stabilized AC voltage during the development, production, operation and repair of electronic devices.
Main properties:
Provides protection against overload and short circuits at the output.
Has a light indication:
- overload and short circuit protection tripping;
- incorrect connection of the power supply line to B2-7.
Technical specifications
The nominal value of the output voltage (SKZ) 220 V
The nominal value of the input and output voltage frequency is 50 Hz
Output electrical power, not less than 1000 VA
The main error in setting the output voltage is ± 2.2 V
Additional error in setting the output voltage caused by a deviation of the input voltage by ± 10% from the nominal value of 220 V ± 1.0 V
Additional error in setting the output voltage caused by a change in the load current from the maximum value to zero ± 2.0 V
Instability of the output voltage for any 10 minutes during 8 hours of continuous operation, no more than ± 2.0 V
Operating temperature range from -10 to 50 °C
AC power supply 220 V, 50 Hz
Power consumption, no more than 1200 VA
Overall dimensions, mm 240x128x349
Weight, not more than 6.5 kg
TEKHNOYAKS
Moscow
Produced in: Moscow
IT5000 Adjustable current source up to 6 kA
Marsenergo
Saint Petersburg
Produced in: Saint Petersburg
UNM-2000/6000 portable magnetizing device
The principle of operation of the means of magnetic particle control
The portable device UNM-2000/6000 of the MANUL series is a magnetic particle flaw detector that provides measurements by the applied field method and the residual magnetization method using direct, alternating and pulsed current with specified parameters. External magnetizing devices included in the kit (solenoids, electromagnets, contact devices for connecting cables) allow for longitudinal, transverse and circular magnetization of the object under study.
A special magnetic powder, dry or in the form of an emulsion, is applied to the controlled surface. Inhomogeneities of the magnetic field in the places of defects lead to the accumulation of powder particles, thus "showing" a hidden picture.
Design features and advantages of the UNM-2000/6000 powder flaw detector:
In the MANUL series, the UNM-2000/6000 device is capable of providing the highest magnetization current (up to 6000 A in pulse mode), which allows you to control products having a large mass or size, as well as those made of magnetohard alloys;
The device can be included in automated quality control stands: there are network interfaces (LAN, Bluetooth, Wi-Fi) for connection; microprocessor control provides storage and reproduction of magnetization and demagnetization parameters, logging of control results, automatic demagnetization;
The design is modular, allows for changes to implement the individual wishes of the customer;
It fully complies with the following standards: GOST R 56512-2015, GOST R 53700-2009 (ISO 9934-3:2002), GOST R 50.05.06-2018, GOST R ISO 10893-5-2016, GOST ISO 17638-2018 , RD 34.17.102-88, RD-13-05-2006 and other Russian and foreign standards regarding the requirements for magnetizing devices and magnetic particle flaw detectors;
It is approved for use by industry regulatory documents, in particular, by the Russian Railways.
Scope of application
Magnetic powder control devices are widely used in various industries, construction and transport, from steel and pipe rolling plants to organizations engaged in the operation and repair of machines, mechanisms and vehicles. Magnetic powder flaw detectors belong to the means of non-destructive testing and therefore can be used to detect defects in products and structures operating under pressure, including at chemical and oil and gas industry enterprises, as well as during the operation of pipelines.
In particular, devices for monitoring by the magnetic powder method have proven themselves well at Russian Railways and metro enterprises engaged in the operation and repair of rolling stock, including for the control of shafts, wheels and wheel pairs, gearboxes, springs, couplers and other loaded components and parts.
Technical specifications:
Magnetization currents:
Variable,
Pulse,
Rectified (only for solenoid and electromagnet)
The measurement error of the magnetization current is no more than 10%.
Characteristics of the pulse current:
The repetition frequency of unipolar current pulses during magnetization and of multipolar current pulses during demagnetization is (2 ± 0.2) Hz.
The duration of the current pulses is at least 1.5 ms.
Magnetic characteristics of the solenoid:
The maximum alternating magnetic field in the center of a single solenoid is at least 100 A/cm.
The maximum alternating magnetic field on the axis in the center between two solenoids located at a distance of 200 mm is at least 60 A/cm.
The maximum permanent magnetic field in the center of a single solenoid is at least 80 A/cm.
The maximum permanent magnetic field on the axis in the center between two solenoids located at a distance of 200 mm is at least 50 A/cm.
Values of magnetization currents:
The maximum alternating magnetization current in the unwound cable is 6 m × 50 mm2 and on the electrical contacts is at least 2000 A.
The maximum pulse magnetization current in an unwound cable of 4 m × 10 mm2 and on electrical contacts is at least 6000 A.
The current adjustment range in the solenoids and the electromagnet is from 0.5 to 4.5 A.
Characteristics of the electromagnet:
The maximum alternating magnetic field in the air gap of the electromagnet depending on the interpolar distance is as follows:
- in the 140 mm gap: at least 75 A/cm;
- in the 40 mm gap: at least300 A/cm.
The maximum constant magnetic field in the air gap of the electromagnet depending on the interpolar distance is as follows:
- in the 140 mm gap: at least 100 A/cm;
- in the 40 mm gap: at least 400 A/cm.
Operating mode:
The operating mode is cyclic: magnetization/pause.
The magnetization time is adjustable from 1 to 40 s.
The demagnetization time is adjustable from 5 to 60 seconds.
Demagnetization of parts is performed automatically.
The time of setting the operating mode is no more than 15 seconds.
The duration of continuous operation is at least 8 hours.
Power supply parameters:
The device is powered by an AC power supply with a voltage of 220 V and a frequency of 50 Hz.
The power consumed from the network is no more than 5 kVA.
Overall characteristics:
Overall dimensions of the device (w × h × d) – no more than 267×245×465 mm.
The weight of the device is not more than 50 kg.
Other characteristics:
The average worktime before failure is at least 12500 hours.
The average recovery time is no more than 6 hours.
The average service life of the device is at least 10 years.
Сompliance with standards
The device fully complies with the requirements of GOST R 56512-2015, GOST R 53700-2009 (ISO 9934-3:2002), GOST R 50.05.06-2018, GOST R ISO 10893-5-2016, GOST ISO 17638-2018, RD 34.17.102-88 and RD-13-05-2006 in terms of the requirements for magnetizing devices and magnetic particle flaw detectors.
Identification of the load.
It performs automatic identification of the types of connected load: cables, solenoids and electromagnet.
Control of the connected load current
It allows you to control the current of the connected AC/DC electromagnets and solenoids.
The kit includes:
1 Electrical contact with cable, cross section 50 mm2, length 3m
2 Solenoid cable, 3m long
3 Solenoid cable, 0.5m long
4 Magnetizing cable, cross section 10 mm2, length 6m
5 Magnetizing cable, cross section 50 mm2, length 6m
6 Solenoid - 2pcs
7 The electromagnet is manual
8 Trolley
9 Power unit UNM 2000/6000
RII MNPO SPEKTR
Moscow
Produced in: Moscow
IT3000 Adjustable current source up to 3.6 kA
Marsenergo
Saint Petersburg
Produced in: Saint Petersburg
Cable Finder Success KBI-211
from
48 600 ₽
An accessible tracer without a display with an audible indication in the operator's headphones. Extremely easy to use and in a compact, lightweight case.
Purpose of the cable finder Success KBI-211
• – Search for live electrical cable lines.
• – Search for places where the pipeline and cable intersect.
• – Determination of the occurrence of underground utilities at a depth of up to 6 m.
Features of the AP-004 receiver
• – Analog traceroute receiver.
• – Audio indication in the operator's headphones, the real sound is 50 Hz.
• – Frost-resistant, working at temperatures up to -30 °C.
• – Lightweight, compact housing.
TEKHNO-AS
Kolomna
Produced in: Moscow region, Kolomna
Tracing generator AG-107
from
109 800 ₽
The AG-107 generator is designed to create alternating current in electrically conductive communications with the electromagnetic method of tracerouting.
Features of the AG-107 generator
The main distinguishing feature is the small weight and dimensions of the device with high output power.
The AG-107 generator has a built-in battery based on light high-capacity lithium-iron phosphate (LiFePO4) cells with low self-discharge, dimensions 216x180x105 mm, weight 1.8 kg and provides the following maximum output parameters:
The output power in continuous operation is 30 watts;
output power in intermittent operation mode is 60 W;
Output voltage 60 V;
current 5 A.
The AG-107 generator uses a control interface similar to the AG-105 generator.
The generator implements:
Four sine wave generation frequencies: 512 Hz, 1024 Hz, 8192 Hz and 33 kHz;
continuous, pulse and dual-frequency generation modes;
built-in transmitting antenna operating at frequencies of 8192 Hz and 33 kHz;
the possibility of connecting an external transmitting antenna and induction tongs;
built-in "multimeter" displaying, at the operator's choice, the supply voltage or output parameters: current, power, voltage, load resistance;
the ability to work from an external battery or from the mains ~ 220 V.
The generator can be operated from an external power supply of 10...25 V.
The generator is protected from the effects of voltages up to 400 V when connected to the communication and from exceeding the permissible voltage of the external power supply.
The degree of protection of the case - case IP65 completely eliminates the penetration of dust and water jets inside when the lid is open.
TEKHNO-AS
Kolomna
Produced in: Kolomna, Moscow region
Trace searcher Success AG-309.15N
from
159 600 ₽
The trace searching kit is designed to accurately determine the location and depth of underground utilities (power and signal cable lines, reinforced fiber-optic lines, pipelines made of electrically conductive materials), troubleshooting cable lines, and also allows you to conduct a survey of the area in the shortest possible time and with great reliability before excavation and to prevent damage to engineering communications.
As part of the kit, the receiver is in the form of a monoblock with a large LCD display, which displays an image of the route and automatically calculates the depth of the communication up to 10 m, as well as the current in the line. Connection to the desired route is possible both by contact and contactless method.
TEKHNO-AS
Kolomna
Produced in: Moscow region, Kolomna
Reference measuring unit of the amplitude modulation coefficient K2-83
NNPO im. M.V.Frunze
Nizhny Novgorod
Produced in: Nizhny Novgorod
Cable Finder Success KBI-306N
from
75 600 ₽
Description of the cable finder Success KBI-306N
• – Traceroute receiver in the form of a monoblock with LED indication and sound output to the built-in speaker.
• – Automatic calculation and display of the depth of communication up to 10 m.
Purpose of the cable finder Success KBI-306N
• – Search for live electrical cables.
• – Search and tracing of underground utilities (gas pipelines, pipelines, power and telephone cables).
• – Determination of the occurrence of underground utilities at a depth of up to 10 m.
Features of the AP-017N receiver
• – Modern digital traceroute receiver-monoblock.
• – Bright LED indicator.
• – Displays the measured depth value on the screen.
• – Determination of the deviation from the axis of the route by the LED indicator and the sound signal.
• – Wide range of operating frequencies (50 / 100 / 512 / 1024 / 1450 / 8192 / 8928 / 9820 Hz, Wide Band 12...24 kHz).
• – Frost-resistant, working at temperatures up to -40 ° C.
TEKHNO-AS
Kolomna
Produced in: Moscow region, Kolomna
Power supply B5-86, B5-86/1
Main Features:
Output voltage indication error, ± 0.3 V
Output current indication error, ±0.06 A
Instability of the output voltage
due to changes in the supply voltage, 0.05%
Instability of the output current from a change
in the supply voltage, 0.2%
Instability of the output voltage when
the load current changes, 0.1 %
Instability of the output current when
the load voltage changes, 5.0 %
Output voltage ripple, mV 1.0
MNIPI
Minsk
Produced in: Belarus, Minsk
G3-135 • Low-frequency signal generator
Supertekhpribor
Mytishchi
Produced in: Mytishchi, Moscow region
Cable finder Success KBI-309M (frost-resistant)
from
95 400 ₽
Description of the cable finder Success KBI-309M
• – A traceroute receiver in the form of a monoblock with a frost-resistant LCD display.
• – Graphical representation of the route on the device screen.
• – Automatic calculation and display of the depth of the communication up to 10 m, as well as the current in the line.
Purpose of the cable finder Success KBI-309M
• – Search for live electrical cables.
• – Search and tracing of underground utilities (gas pipelines, pipelines, power and telephone cables).
• – Determination of the occurrence of underground utilities at a depth of up to 10 m.
Features of the AP-019M receiver
• – Modern digital tracer receiver-monoblock AP-019M.
• – The image of the route on the device screen.
• – Automatic calculation and display of the depth of communication and current in the line.
• – Several options for displaying information on the receiver indicator: "Route", "Graph", "Graph+", "Minimum maximum" and "2-frequencies" allow the operator to use the device's capabilities as efficiently as possible.
• – Additional functions when connecting external sensors.
• – Wide range of operating frequencies (50(60) / 100(120) / 512 / 1024 / 8192 / 32768 Hz, wide band 40...8000 Hz, radio 8...40 kHz).
• – Frost-resistant, working at temperatures up to -30 ° C.
• – Menu in two languages (Russian and English).
TEKHNO-AS
Kolomna
Produced in: Moscow region, Kolomna
Trace searcher Success AG-428.15N
from
139 800 ₽
The trace searching kit is designed to accurately determine the location and depth of underground utilities (power and signal cable lines, reinforced fiber-optic lines, pipelines made of electrically conductive materials), troubleshooting cable lines, and also allows you to conduct a survey of the area in the shortest possible time and with great reliability before excavation and to prevent damage to engineering communications.
The kit includes a digital multifunctional tracking receiver with a large LCD display and audio output both to the built-in speaker and to the operator's headphones.
Compact stand-alone generator with display and built-in induction antenna. The output power of the generator is up to 20 watts and the operating range is up to 3 km.
Connection to the desired route is possible both by contact and contactless method.
TEKHNO-AS
Kolomna
Produced in: Moscow region, Kolomna
Frequency comparator CHK7-51
Mathematical processing of the measurement makes it possible to determine and display on the indicator board the relative systematic change in frequency, the average relative value of the frequency difference, the RMS relative frequency deviation, the RMS relative two-sample frequency deviation.
NNPO im. M.V.Frunze
Nizhny Novgorod
Produced in: Nizhny Novgorod
Trace Searcher Success AG-309.15M (frost-resistant)
from
162 600 ₽
The trace searching kit is designed to accurately determine the location and depth of underground utilities (power and signal cable lines, reinforced fiber-optic lines, pipelines made of electrically conductive materials), troubleshooting cable lines, and also allows you to conduct a survey of the area in the shortest possible time and with great reliability before excavation and to prevent damage to engineering communications.
As part of the kit, the receiver is in the form of a monoblock with a frost-resistant LCD display, which displays an image of the route and automatically calculates the depth of the communication up to 10 m, as well as the current in the line.
Compact stand-alone generator with display and built-in induction antenna.
The output power of the generator is up to 20 watts and the range of operation is up to 3 km.
TEKHNO-AS
Kolomna
Produced in: Moscow region, Kolomna
Phase difference meter and level ratio FC2-40/1
NNPO im. M.V.Frunze
Nizhny Novgorod
Produced in: Nizhny Novgorod
Cable searcher with GPS/GLONASS coordinates saving function Success KBI-309K
from
109 800 ₽
Description of the cable searcher Success KBI-309K
• – Traceroute receiver in the form of a monoblock with a large LCD display.
• – The image of the route on the device screen.
• – Automatic calculation and display of the depth of the communication up to 10 m, as well as the current in the line.
– Built-in GPS\GLONASS module for determining and recording the coordinates of the location of communication.
– "Probe" mode for tracing NON-METALLIC communications using an in-tube generator (optional).
TEKHNO-AS
Kolomna
Produced in: Moscow region, Kolomna
Cable Finder Success KBI-206
from
71 400 ₽
Multifunctional tracer device with a pointer indicator and audio output to the operator's headphones.
Purpose of the cable finder Success KBI-206
• – Search for live electrical cable lines.
• – Search for places where the pipeline and cable intersect.
• – Determination of the occurrence of underground utilities at a depth of up to 6 m.
• – Survey of the territory before excavation.
Features of the AP-010M receiver
• – Analog traceroute receiver.
• – Arrow indicator of the signal level.
• – Wide range of operating frequencies (50 / 100 / 512 / 1024 / 8928 Hz, "Wide Band" mode), frequency filters.
• – Frost-resistant, working at temperatures up to -30 °C.
• – Possibility to additionally connect an acoustic sensor (leak detector / flaw detector function).
TEKHNO-AS
Kolomna
Produced in: Moscow region, Kolomna
