Catalog
Back to search results
Gas-tight container "GPK-10.0,9/9"
Back to search results
Gas-tight container "GPK-10.0,9/9"
Gas-tight containers "GPK-10.0,9/9" are intended for use as part of the shaft furnaces "SSHO-10.5.22/10" for heat treatment in an oxidizing environment.
Optionally, the gas supply and mixing system "SPSG" is supplied.
Optionally, the gas supply and mixing system "SPSG" is supplied.
Container KOGPK-10.5.22/0
The container KOGPK-10.5.22/0 is designed for cooling gas-tight containers "GPK" in order to increase productivity during heat treatment.
Tula-Term
Tula
Produced in: Tula
LB63-32/50K Basket
The height-adjustable bottom allows the tubes to be immersed in the coolant to the required depth.
Overall dimensions 515x310x215 mm
Weight 2.8 kg
Termeks
Tomsk
Produced in: Tomsk
Set of devices GOST 11851 method A
It is intended for placement in the BF bath and is used in determining the mass fraction of paraffins in oil in accordance with the method A of the State Standard 11851.
Termeks
Tomsk
Produced in: Tomsk
USB-RS485 Adapter
It is used to connect TDS thermometers and MASTER thermostats equipped with an RS 485 interface to a personal computer via a USB interface.
The use of this adapter does not require the installation of additional drivers because it uses the HID driver built into the operating system to exchange data.
Termeks
Tomsk
Produced in: Tomsk
Discs with high sealing capacity for SVB connections (aluminum) for ISO-F flanges
Vakuummash
Kazan
Produced in: Kazan
Heating element for 1.5 kW 220 V distiller
from
1 980 ₽
The tank for the 1.5 kW aquadistillator is made of stainless steel.
Livam
Belgorod
Produced in: Belgorod
Set of devices EN 23015 (ASTM D97)
It is used for determining the turbidity or fluidity temperature of petroleum products in accordance with EN 23015 and ASTM D97.
For testing, additional sets of devices BNTI 05 04 K and BNTI 05 04 3K are required.
Termeks
Tomsk
Produced in: Tomsk
Spring THERMOTEST holder-DP1-9/16
Allows you to install and securely fix up to 6 verifiable thermometers with a diameter of the submerged part from 9 to 16 mm.
The design of the holder eliminates damage to glass thermometers.
It is designed for calibration thermostats THERMOTEST-100 and THERMOTEST-300.
Termeks
Tomsk
Produced in: Tomsk
Bracket for mounting the AE-4/AE-5 disstillator on the wall
from
3 600 ₽
The bracket for mounting the distiller provides the possibility of not only desktop, but also wall-mounted installation of the aquadistillator at the required height.
Livam
Belgorod
Produced in: Belgorod
Heating element for a 3.5 kW 220 V distiller
from
1 860 ₽
The tank for the 3.5 kW aquadistillator is made of stainless steel.
Livam
Belgorod
Produced in: Belgorod
Tripod for test tubes LA-203
Number of sockets, pcs 33
Hole diameter, mm 17
Immersion depth, mm 200
Overall dimensions (WxDxH), mm 235x80x215
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Holder THERMOTEST-D1-16/20
The holder with flat steel springs allows you to install and securely fix up to 6 verifiable thermometers with a diameter of the submerged part from 16 to 20 mm.
It is designed for calibration thermostats THERMOTEST-100 and THERMOTEST-300.
Termeks
Tomsk
Produced in: Tomsk
MT-21-S Glass
A glass with a lid is designed to accommodate unambiguous measures of electrical resistance in the MT-21 thermostat during their verification and calibration in accordance with GOST 8.237.
Internal dimensions 103x170 mm
Weight 0.3 kg
Termeks
Tomsk
Produced in: Tomsk