The ISO-KF connection (DIN 28 403 and ISO 2861) allows quick installation and replacement of components in vacuum systems. The connection consists of two symmetrical ISO-KF flanges (1), a centering ring with an O-ring seal (2) and a quick-release clamp (3). High-vacuum ISO-KF connections can be mounted without using a tool by simply turning the nut of the quick-release clamp.

Vakuummash

Kazan

fitting

general laboratory

vacuum

accessories

Produced in: Kazan

CF Adapters

ConFlat (CF) standard connections are used to ensure the connection of components of vacuum systems operating in the field of high and ultra-high vacuum.

Kazan

Produced in: Kazan

CF transition flanges

ConFlat (CF) standard connections are used to ensure the connection of components of vacuum systems operating in the field of high and ultra-high vacuum.

Kazan

Produced in: Kazan

ConFlat (CF) standard connections are used to ensure the connection of components of vacuum systems operating in the field of high and ultra-high vacuum.

Kazan

Produced in: Kazan

Quick - release hamuts

Kazan

Produced in: Kazan

Crimping centering rings (aluminum) with O-ring of circular cross-section

Kazan

Produced in: Kazan

Profile gasket without support ring

ConFlat (CF) standard connections are used to ensure the connection of components of vacuum systems operating in the field of high and ultra-high vacuum.

Kazan

Produced in: Kazan

Bolts, nuts and washers for connection to the gates of the VAT series

Kazan

Produced in: Kazan

Vacuum sealing discs for ISO-F flanges (aluminum/CR)

Kazan

Produced in: Kazan

Sealing rings with high sealing capacity for SVV joints (aluminum)

Kazan

Produced in: Kazan

Claw clips in the groove

Size of DN: 10,16,20,25,32,40,50.

Kazan

Produced in: Kazan

ConFlat (CF) standard connections are used to ensure the connection of components of vacuum systems operating in the field of high and ultra-high vacuum.

Kazan

Produced in: Kazan

May be interested in

LB63-32/50K Basket

The height-adjustable bottom allows the tubes to be immersed in the coolant to the required depth. Overall dimensions 515x310x215 mm Weight 2.8 kg

Tomsk

Produced in: Tomsk

Set of devices GOST 11851 method A

It is intended for placement in the BF bath and is used in determining the mass fraction of paraffins in oil in accordance with the method A of the State Standard 11851.

Tomsk

Produced in: Tomsk

It is used to connect TDS thermometers and MASTER thermostats equipped with an RS 485 interface to a personal computer via a USB interface. The use of this adapter does not require the installation of additional drivers because it uses the HID driver built into the operating system to exchange data.

Tomsk

Produced in: Tomsk

Discs with high sealing capacity for SVB connections (aluminum) for ISO-F flanges

Kazan

Produced in: Kazan

Accessories for water distillers

from 1 100 ₽

Zhukov

Produced in: Kaluga region, Zhukov

Heating element for 1.5 kW 220 V distiller

from 1 980 ₽

The tank for the 1.5 kW aquadistillator is made of stainless steel.

Belgorod

Produced in: Belgorod

Bucket-rotor CRA 2015

from 5 775 ₽

Zhukov

Produced in: Kaluga region, Zhukov

Set of devices EN 23015 (ASTM D97)

It is used for determining the turbidity or fluidity temperature of petroleum products in accordance with EN 23015 and ASTM D97. For testing, additional sets of devices BNTI 05 04 K and BNTI 05 04 3K are required.

Tomsk

Produced in: Tomsk

Spring THERMOTEST holder-DP1-9/16

Allows you to install and securely fix up to 6 verifiable thermometers with a diameter of the submerged part from 9 to 16 mm. The design of the holder eliminates damage to glass thermometers. It is designed for calibration thermostats THERMOTEST-100 and THERMOTEST-300.

Tomsk

Produced in: Tomsk

Bracket for mounting the AE-4/AE-5 disstillator on the wall

from 3 600 ₽

The bracket for mounting the distiller provides the possibility of not only desktop, but also wall-mounted installation of the aquadistillator at the required height.

Belgorod

Produced in: Belgorod

Heating element for a 3.5 kW 220 V distiller

from 1 860 ₽

The tank for the 3.5 kW aquadistillator is made of stainless steel.

Belgorod

Produced in: Belgorod

Gas-tight container "GPK-10.0,9/9"

Gas-tight containers "GPK-10.0,9/9" are intended for use as part of the shaft furnaces "SSHO-10.5.22/10" for heat treatment in an oxidizing environment. Optionally, the gas supply and mixing system "SPSG" is supplied.

Tula

Produced in: Tula

Tripod for test tubes LA-203

Number of sockets, pcs 33 Hole diameter, mm 17 Immersion depth, mm 200 Overall dimensions (WxDxH), mm 235x80x215

Saint Petersburg

Produced in: Saint Petersburg

Holder THERMOTEST-D1-16/20

The holder with flat steel springs allows you to install and securely fix up to 6 verifiable thermometers with a diameter of the submerged part from 16 to 20 mm. It is designed for calibration thermostats THERMOTEST-100 and THERMOTEST-300.

Tomsk

Produced in: Tomsk

Size of DN: 40 to 160.

Kazan

Produced in: Kazan

Claw clamps (galvanized steel) for ISO-K

Kazan

Produced in: Kazan

A glass with a lid is designed to accommodate unambiguous measures of electrical resistance in the MT-21 thermostat during their verification and calibration in accordance with GOST 8.237. Internal dimensions 103x170 mm Weight 0.3 kg

Tomsk

Produced in: Tomsk