Distilate Cooler for AE-4/AE-5 distiller

It is used in determining the density of petroleum products, resins, plasticizers and other chemical products by hydrometers in stainless steel cylinders with a height of 300 mm and internal diameters of 60.5 and 73 mm.

It is intended for placement in the inner bath of the liquid thermostat VT25 or VT25-2 forms with samples when testing grouting cements in accordance with the State Standard 26798.2. Ventilation openings are nedeed for better convection of the coolant. Internal dimensions 290x250x140 mm Weight 2.5 kg

The tank for the 2.7 kW aquadistillator is made of stainless steel.

Gas-tight containers "GPK-10.0,9/9" are intended for use as part of the shaft furnaces "SSHO-10.5.22/10" for heat treatment in an oxidizing environment. Optionally, the gas supply and mixing system "SPSG" is supplied.

The clamp connection (DIN 28 404 and ISO 1609) allows connecting components from DN 63 to DN 630 in any position, on any fixed flange regardless of the location of the bolt holes.

Number of sockets, pcs 27 Hole diameter, mm 22 Immersion depth, mm 200 Overall dimensions (WxDxH), mm 235x80x215

The stand provides convenience when taking measurements, allowing you to set the thermometers at eye level. It is designed for calibration thermostat THERMOTEST 300. Overall dimensions 400x625x420 mm

Number of sockets, pcs 11 Hole diameter, mm 25 Immersion depth, mm 200 Overall dimensions (WxDxH), mm 180x80x215

The ISO-KF connection (DIN 28 403 and ISO 2861) allows quick installation and replacement of components in vacuum systems. The connection consists of two symmetrical ISO-KF flanges (1), a centering ring with an O-ring seal (2) and a quick-release clamp (3). High-vacuum ISO-KF connections can be mounted without using a tool by simply turning the nut of the quick-release clamp.

The cuvette is made of K-8 glass. It consists of 2 rectangular plates, measuring 80x20 mm.

Inner diameter, mm 6 Outer diameter, mm 8

The safety valves are conveniently fixed with magnets, and in the working position they can be fixed in the lower part of the case, without interfering with access to the thermometer.

Allows you to install and securely fix up to 6 verifiable thermometers with a diameter of the submerged part from 3 to 9 mm. The design of the holder eliminates damage to glass thermometers. It is designed for calibration thermostats THERMOTEST-100 and THERMOTEST-300.

The bracket for mounting the distiller provides the possibility of not only desktop, but also wall-mounted installation of the aquadistillator at the required height.

It is used for determining the low-temperature characteristics of petroleum products and organic chemical products in accordance with the State Standard 20287 (method A), EN 23015, ASTM D97 and GOST 18995.5.