Catalog
Back to search results
2MO-5 Oil separator
Back to search results
2MO-5 Oil separator
The 2MO-5 oil separator is installed on the exhaust flange of the pump by means of a quick-release connection, and can also be connected through a pipeline, if there is no possibility of placement on the exhaust flange. If you purchase the 2MO-5 oil separator as an independent product, it is necessary (only for the 2NVR-5DM pump, which has threads in the housing) to remove the pump housing and the exhaust olive, install the fitting instead of the olive with a nut and seal, lay the mesh inside the fitting, install the oil separator with a quick-release clamp, ring and seal.
Basket VT14-K-PZH25
The height-adjustable bottom allows the tanks to be immersed in the coolant to the required depth.
Internal dimensions 150x90 mm
Weight 1 kg
Termeks
Tomsk
Produced in: Tomsk
CRYO basket-VT-06-K
It is designed to accommodate thermostatically controlled objects in the inner bath of the liquid low-temperature thermostat CRYO VT 06. The height-adjustable bottom allows objects to be immersed in the coolant to the required depth.
Internal dimensions 300x200x120 mm
Weight 2.7 kg
Termeks
Tomsk
Produced in: Tomsk
A set of VT-ro-2K devices
It is used in determining the density of petroleum products, resins, plasticizers and other chemical products by hydrometers in stainless steel cylinders with a height of 300 mm and internal diameters of 60.5 and 73 mm.
Termeks
Tomsk
Produced in: Tomsk
Transitional centering rings (aluminum / stainless steel) with O-ring of circular cross-section
The ISO-KF connection (DIN 28 403 and ISO 2861) allows quick installation and replacement of components in vacuum systems. The connection consists of two symmetrical ISO-KF flanges (1), a centering ring with an O-ring seal (2) and a quick-release clamp (3). High-vacuum ISO-KF connections can be mounted without using a tool by simply turning the nut of the quick-release clamp.
Vakuummash
Kazan
Produced in: Kazan
Clamping flanges with a branch pipe (nickel-plated steel / stainless steel)
Vakuummash
Kazan
Produced in: Kazan
Set of devices EN 23015 (ASTM D97)
It is used for determining the turbidity or fluidity temperature of petroleum products in accordance with EN 23015 and ASTM D97.
For testing, additional sets of devices BNTI 05 04 K and BNTI 05 04 3K are required.
Termeks
Tomsk
Produced in: Tomsk
Holder THERMOTEST-D2-16/20
The holder with flat steel springs allows you to install and securely fix up to 6 verifiable thermometers with a diameter of the submerged part from 16 to 20 mm.
It is designed for THERMOTEST 05 and THERMOTEST-05-1 thermostats.
Termeks
Tomsk
Produced in: Tomsk
Crimp support rings (stainless steel) for sealing rings with high sealing capacity
The ISO-KF connection (DIN 28 403 and ISO 2861) allows quick installation and replacement of components in vacuum systems. The connection consists of two symmetrical ISO-KF flanges (1), a centering ring with an O-ring seal (2) and a quick-release clamp (3). High-vacuum ISO-KF connections can be mounted without using a tool by simply turning the nut of the quick-release clamp.
Vakuummash
Kazan
Produced in: Kazan
Basket VT25-K
It is intended for placement in the inner bath of the liquid thermostat VT25 or VT25-2 forms with samples when testing grouting cements in accordance with the State Standard 26798.2.
Ventilation openings are nedeed for better convection of the coolant.
Internal dimensions 290x250x140 mm
Weight 2.5 kg
Termeks
Tomsk
Produced in: Tomsk
LB13-18/24K Basket
The height-adjustable bottom allows the tubes to be immersed in the coolant to the required depth.
Internal dimensions 255x150x215 mm
Weight 1 kg
Termeks
Tomsk
Produced in: Tomsk
CF rotating caps
ConFlat (CF) standard connections are used to ensure the connection of components of vacuum systems operating in the field of high and ultra-high vacuum.
Vakuummash
Kazan
Produced in: Kazan
Stand THERMOTEST-300-P
The stand provides convenience when taking measurements, allowing you to set the thermometers at eye level.
It is designed for calibration thermostat THERMOTEST 300.
Overall dimensions 400x625x420 mm
Termeks
Tomsk
Produced in: Tomsk