Silicone hose with thermal insulation and an internal diameter of 18 mm is used to connect the CRYO-VT-07 thermostat or A600 circulation cooler to external consumers.

Bellows hose with thermal insulation

Bellows hose with thermal insulation and an internal diameter of 10 mm is used to connect thermostats of the VTi CRYO-VT series to external consumers or as a jumper hose. We recommend it for use with PMS heat carriers at high temperatures.

Termeks

Tomsk

Produced in: Tomsk

Silicone hose 10x2 with thermal insulation

Silicone hose with thermal insulation and an internal diameter of 10 mm is used to connect circulating coolers and thermostats of the CRYO-W series to external consumers or is used as a jumper hose

Tomsk

Produced in: Tomsk

Silicone hose with an internal diameter of 18 mm is used to connect the CRYO-VT-07 thermostat or A600 circulation cooler to external consumers.

Tomsk

Produced in: Tomsk

Silicone hose with an inner diameter of 10 mm is used to connect the thermostats of the VTk series with external consumers or is used as a jumper hose.

Tomsk

Produced in: Tomsk

Silicone hose 8x2 with thermal insulation

Silicone hose with thermal insulation and an internal diameter of 8 mm is used to connect the A160 and A300 circulation coolers with the W series thermostats or to external consumers.

Tomsk

Produced in: Tomsk

Viton jumper hose 10/14

For thermostats operating at high temperatures and filled with an ICP coolant, a viton hose with a cross section of 10/14 should be used as a jumper hose.

Tomsk

Produced in: Tomsk

Silicone hose with an inner diameter of 8 mm is used to connect circulation coolers A160 and A300 with thermostats of the W series or to external consumers.

Tomsk

Produced in: Tomsk

A viton hose with an internal diameter of 10 mm is used to connect the VTi CRYO-VT series thermostats to external consumers or as a jumper hose. We recommend it for use with PMS heat carriers

Tomsk

Produced in: Tomsk

May be interested in

Device for lifting and lowering samples LA-220

Designed for immersion of objects in the baths of LOIP LT thermostats and LOIP LB-200 precision thermostatic baths to a predetermined depth. Thermostatable objects are placed on a movable pallet, which can be fixed at any required depth. The device is installed on the casing of thermostats and precision thermostatic baths instead of a hinged lid and is equipped with its own removable lid. Bath volume, l 17 and 24 Pallet size, mm 260x320 Maximum immersion depth, mm 200

LOIP

Saint Petersburg

general laboratory

specimen lifting-lowering device

Saint Petersburg

accessories

Produced in: Saint Petersburg

Set of devices for CRYO-VIS-T-06 the State Standard 20287 method B

It is used in determining the pour point of petroleum products in accordance with the State Standard 20287 (method B).

Tomsk

Produced in: Tomsk

Bracket for mounting the AE-4/AE-5 disstillator on the wall

from 3 600 ₽

The bracket for mounting the distiller provides the possibility of not only desktop, but also wall-mounted installation of the aquadistillator at the required height.

Belgorod

Produced in: Belgorod

Replacement O-rings for ISO-F flange connections

Kazan

Produced in: Kazan

Discs with high sealing capacity for SVB connections (aluminum) for ISO-F flanges

Kazan

Produced in: Kazan

Set of devices GOST 11851 method A

It is intended for placement in the BF bath and is used in determining the mass fraction of paraffins in oil in accordance with the method A of the State Standard 11851.

Tomsk

Produced in: Tomsk

The height-adjustable bottom allows the tubes to be immersed in the coolant to the required depth. Overall dimensions 515x310x215 mm Weight 2.8 kg

Tomsk

Produced in: Tomsk

Transitional centering rings (aluminum / stainless steel) with O-ring of circular cross-section

The ISO-KF connection (DIN 28 403 and ISO 2861) allows quick installation and replacement of components in vacuum systems. The connection consists of two symmetrical ISO-KF flanges (1), a centering ring with an O-ring seal (2) and a quick-release clamp (3). High-vacuum ISO-KF connections can be mounted without using a tool by simply turning the nut of the quick-release clamp.

Kazan

Produced in: Kazan

ISO-F flanges with a side and a locking ring for clamping flange connections (steel)

Kazan

Produced in: Kazan

Tripod for test tubes LA-208

Number of sockets, pcs 15 Hole diameter, mm 22 Immersion depth, mm 200 Overall dimensions (WxDxH), mm 180x80x215

Saint Petersburg

Produced in: Saint Petersburg

Heating element for a 3.5 kW 220 V distiller

from 1 860 ₽

The tank for the 3.5 kW aquadistillator is made of stainless steel.

Belgorod

Produced in: Belgorod

A set of BNTI devices-05-04- 4K

It is intended for placing vessels with samples in the working baths of the BNTI 05 04 bath when determining the low-temperature properties of petroleum products, if appropriate test vessels are available. Suitable for placing vessels with samples for the State Standard 20287 (Method A), EN 23015 or ASTM D97.

Tomsk

Produced in: Tomsk

Set of VT18-K devices

The set of devices is designed to accommodate thermostatically controlled objects in the inner bath of the VT18 or VT18-2 liquid thermostat when they are immersed to a depth of 40 or 70 mm from the bottom of the inner bath. Overall dimensions 350x260x70 mm Weight 2.1 kg

Tomsk

Produced in: Tomsk

A set of CRYO-T devices-05-01- K

It is used in determining the low-temperature characteristics of petroleum products and organic chemical products in accordance with the State Standard 5066 (Method B) and GOST 18995.5.

Tomsk

Produced in: Tomsk

ConFlat (CF) standard connections are used to ensure the connection of components of vacuum systems operating in the field of high and ultra-high vacuum.

Kazan

Produced in: Kazan