It is designed to accommodate 26 tubes with a diameter of up to 12 mm when thermostated in the inner bath of a low-temperature liquid thermostat CRYO-VT-12 or CRYO-VT-12-1.

Overall dimensions 130x78x170 mm

Weight 0.2 kg

Basket MT-21-K

The basket with a lid is designed to accommodate unambiguous measures of electrical resistance in the MT-21 thermostat during their verification and calibration in accordance with GOST 8.237. Internal dimensions 103x170 mm Weight 0.3 kg

Termeks

Tomsk

Produced in: Tomsk

It is designed for simultaneous placement of four settling tanks with a capacity of 100 ml and two settling tanks with a capacity of 500 ml in the inner bath of the liquid low-temperature thermostat CRYO VT 06 when determining the liquid residue, free water and alkali in liquefied hydrocarbon gases. Internal dimensions 295x205x180 mm Weight 3 kg

Tomsk

Produced in: Tomsk

A basket with a height-adjustable bottom allows objects to be immersed in the coolant to the required depth. Overall dimensions 305x305x390 mm Internal dimensions 260x250mm Weight 3.1 kg

Tomsk

Produced in: Tomsk

Eight holes with a diameter of 17 mm will serve to accommodate glass tubes, the remaining nine ventilation holes — for better convection of the coolant. Internal dimensions 240x120x210 mm Weight 1 kg

Tomsk

Produced in: Tomsk

The height-adjustable bottom allows objects to be immersed in the coolant to the required depth. Internal dimensions 110x128x240 mm Weight 1.5 kg

Tomsk

Produced in: Tomsk

It is designed to accommodate thermostatically controlled objects in the inner bath of the liquid low-temperature thermostat CRYO VT 06. The height-adjustable bottom allows objects to be immersed in the coolant to the required depth. Internal dimensions 300x200x120 mm Weight 2.7 kg

Tomsk

Produced in: Tomsk

The height-adjustable bottom allows the tanks to be immersed in the coolant to the required depth. Internal dimensions 150x90 mm Weight 1 kg

Tomsk

Produced in: Tomsk

Four workstations with a diameter of 140 mm and a height-adjustable bottom allow the sample containers to be immersed in the coolant to the required depth. Overall dimensions 515x310x215 mm Weight 3.5 kg

Tomsk

Produced in: Tomsk

It is intended for placement in the inner bath of the liquid thermostat VT25 or VT25-2 forms with samples when testing grouting cements in accordance with the State Standard 26798.2. Ventilation openings are nedeed for better convection of the coolant. Internal dimensions 290x250x140 mm Weight 2.5 kg

Tomsk

Produced in: Tomsk

The height-adjustable bottom allows the tubes to be immersed in the coolant to the required depth. Overall dimensions 515x310x215 mm Weight 2.8 kg

Tomsk

Produced in: Tomsk

It is designed to accommodate twenty-four tubes with a diameter of 30 mm when thermostated in a laboratory bath LB33 or LB33-Sh. The height-adjustable bottom allows the tubes to be immersed in the coolant to the required depth. Overall dimensions 310x250x210 mm Weight 1.5 kg

Tomsk

Produced in: Tomsk

It is designed to accommodate twenty-four tubes with a diameter of 18 mm during thermostating in the inner bath of the liquid thermostat VT12 or VT12-2. The height-adjustable bottom allows the tubes to be immersed in the coolant to the required depth. Overall dimensions 280x165x210 mm Weight 1.1 kg

Tomsk

Produced in: Tomsk

It is designed to accommodate thermostatically controlled objects in the inner bath of the T40 liquid thermostat. A basket with a height-adjustable bottom allows objects to be immersed in the coolant to the required depth. Overall dimensions 305x305x390 mm Internal dimensions 260x250mm Weight 2.8 kg

Tomsk

Produced in: Tomsk

The height-adjustable bottom allows the tubes to be immersed in the coolant to the required depth. Internal dimensions 255x150x215 mm Weight 1 kg

Tomsk

Produced in: Tomsk

Eight workstations with a diameter of 85 mm with three steel O-rings and a height-adjustable bottom allow the sample containers to be immersed in the coolant to the required depth. Overall dimensions 515x310x210 mm Weight 3.3 kg

Tomsk

Produced in: Tomsk

It is designed for thermostating glasses, flasks and evaporating cups with samples in the laboratory bath LB33 and LB33-Sh. Overall dimensions 310x250x210 mm Weight 2.0 kg

Tomsk

Produced in: Tomsk

May be interested in

External VT-D temperature sensor

It is necessary for accurate temperature maintenance in external objects. The diameter and length of the submerged part are 3 and 240 mm, respectively. The nominal static characteristic of Pt1000.

Tomsk

Produced in: Tomsk

Set of devices for CRYO-T-05-01 the State Standard 20287 method B

It is used for determining the pour point of petroleum products in accordance with GOST 20287 (method B).

Tomsk

Produced in: Tomsk

The stainless steel stand is designed for installation and storage of pressure gauges MTIf 100, MTIf 160 and MTIf 400 in the process of determining the absolute vapor pressure of volatile crude oil and volatile non-viscous petroleum products. Overall dimensions 170x95x105 mm Weight 0.5 kg

Tomsk

Produced in: Tomsk

A set of BNTI devices-05-04- K

It is used for determining the low-temperature characteristics of petroleum products and organic chemical products in accordance with the State Standard 20287 (method A), EN 23015, ASTM D97 and GOST 18995.5.

Tomsk

Produced in: Tomsk

It is designed for simultaneous polishing of four copper plates measuring 75×12.5×2 mm used in determining the corrosive effect of fuels in accordance with GOST ISO 2160, GOST 32329, GOST 6321, GOST 2917 and ASTM D130.

Tomsk

Produced in: Tomsk

Centering rings (stainless steel) with a metal-ceramic filter (stainless steel) and O-ring of circular cross-section

The ISO-KF connection (DIN 28 403 and ISO 2861) allows quick installation and replacement of components in vacuum systems. The connection consists of two symmetrical ISO-KF flanges (1), a centering ring with an O-ring seal (2) and a quick-release clamp (3). High-vacuum ISO-KF connections can be mounted without using a tool by simply turning the nut of the quick-release clamp.

Kazan

Produced in: Kazan

Spring THERMOTEST holder-DP1-9/16

Allows you to install and securely fix up to 6 verifiable thermometers with a diameter of the submerged part from 9 to 16 mm. The design of the holder eliminates damage to glass thermometers. It is designed for calibration thermostats THERMOTEST-100 and THERMOTEST-300.

Tomsk

Produced in: Tomsk

Device for lifting and lowering samples LA-221

Designed for immersion of objects in the baths of LOIP LT thermostats and LOIP LB-200 precision thermostatic baths to a predetermined depth. Thermostatable objects are placed on a movable pallet, which can be fixed at any required depth. The device is installed on the casing of thermostats and precision thermostatic baths instead of a hinged lid and is equipped with its own removable lid. Bath volume, l 12 and 16 Pallet size, mm 260x140 Maximum immersion depth, mm 200

LOIP

Saint Petersburg

general laboratory

specimen lifting-lowering device

Saint Petersburg

accessories

Produced in: Saint Petersburg

Tripod for test tubes LA-207

Number of sockets, pcs 21 Hole diameter, mm 17 Immersion depth, mm 200 Overall dimensions (WxDxH), mm 180x80x215

Saint Petersburg

Produced in: Saint Petersburg

Tripod for test tubes LA-203

Number of sockets, pcs 33 Hole diameter, mm 17 Immersion depth, mm 200 Overall dimensions (WxDxH), mm 235x80x215

Saint Petersburg

Produced in: Saint Petersburg

Stand THERMOTEST-100-P

The stand provides convenience when taking measurements, allowing you to set the thermometers at eye level. Designed for calibration thermostat THERMOTEST-100. Overall dimensions 400x625x490 mm

Tomsk

Produced in: Tomsk

Crimping centering rings (aluminum) with O-ring of circular cross-section

Kazan

Produced in: Kazan

LTA-KC thermometer case

The safety valves are conveniently fixed with magnets, and in the working position they can be fixed in the lower part of the case, without interfering with access to the thermometer.

Tomsk

Produced in: Tomsk