It is intended for placement in the inner bath of the liquid thermostat VT25 or VT25-2 forms with samples when testing grouting cements in accordance with the State Standard 26798.2.
Ventilation openings are nedeed for better convection of the coolant.

Internal dimensions 290x250x140 mm

Weight 2.5 kg

LB33-187/1K Basket

It is designed for thermostating glasses, flasks and evaporating cups with samples in the laboratory bath LB33 and LB33-Sh. Overall dimensions 310x250x210 mm Weight 2.0 kg

Termeks

Tomsk

Produced in: Tomsk

The height-adjustable bottom allows objects to be immersed in the coolant to the required depth. Internal dimensions 110x128x240 mm Weight 1.5 kg

Tomsk

Produced in: Tomsk

Four workstations with a diameter of 140 mm and a height-adjustable bottom allow the sample containers to be immersed in the coolant to the required depth. Overall dimensions 515x310x215 mm Weight 3.5 kg

Tomsk

Produced in: Tomsk

It is designed to accommodate thermostatically controlled objects in the inner bath of the T40 liquid thermostat. A basket with a height-adjustable bottom allows objects to be immersed in the coolant to the required depth. Overall dimensions 305x305x390 mm Internal dimensions 260x250mm Weight 2.8 kg

Tomsk

Produced in: Tomsk

The height-adjustable bottom allows the tubes to be immersed in the coolant to the required depth. Internal dimensions 255x150x215 mm Weight 1 kg

Tomsk

Produced in: Tomsk

It is designed for simultaneous placement of four settling tanks with a capacity of 100 ml and two settling tanks with a capacity of 500 ml in the inner bath of the liquid low-temperature thermostat CRYO VT 06 when determining the liquid residue, free water and alkali in liquefied hydrocarbon gases. Internal dimensions 295x205x180 mm Weight 3 kg

Tomsk

Produced in: Tomsk

The basket with a lid is designed to accommodate unambiguous measures of electrical resistance in the MT-21 thermostat during their verification and calibration in accordance with GOST 8.237. Internal dimensions 103x170 mm Weight 0.3 kg

Tomsk

Produced in: Tomsk

Eight workstations with a diameter of 85 mm with three steel O-rings and a height-adjustable bottom allow the sample containers to be immersed in the coolant to the required depth. Overall dimensions 515x310x210 mm Weight 3.3 kg

Tomsk

Produced in: Tomsk

CRYO-W Basket-12-12/ 26K

It is designed to accommodate 26 tubes with a diameter of up to 12 mm when thermostated in the inner bath of a low-temperature liquid thermostat CRYO-VT-12 or CRYO-VT-12-1. Overall dimensions 130x78x170 mm Weight 0.2 kg

Tomsk

Produced in: Tomsk

The height-adjustable bottom allows the tubes to be immersed in the coolant to the required depth. Overall dimensions 515x310x215 mm Weight 2.8 kg

Tomsk

Produced in: Tomsk

It is designed to accommodate twenty-four tubes with a diameter of 18 mm during thermostating in the inner bath of the liquid thermostat VT12 or VT12-2. The height-adjustable bottom allows the tubes to be immersed in the coolant to the required depth. Overall dimensions 280x165x210 mm Weight 1.1 kg

Tomsk

Produced in: Tomsk

The height-adjustable bottom allows objects to be immersed in the coolant to the required depth. Internal dimensions 290x160x150 mm Weight 1.5 kg

Tomsk

Produced in: Tomsk

A basket with a height-adjustable bottom allows objects to be immersed in the coolant to the required depth. Overall dimensions 305x305x390 mm Internal dimensions 260x250mm Weight 3.1 kg

Tomsk

Produced in: Tomsk

Set of VT18-K devices

The set of devices is designed to accommodate thermostatically controlled objects in the inner bath of the VT18 or VT18-2 liquid thermostat when they are immersed to a depth of 40 or 70 mm from the bottom of the inner bath. Overall dimensions 350x260x70 mm Weight 2.1 kg

Tomsk

Produced in: Tomsk

It is designed to accommodate thermostatically controlled objects in the inner bath of the liquid low-temperature thermostat CRYO VT 06. The height-adjustable bottom allows objects to be immersed in the coolant to the required depth. Internal dimensions 300x200x120 mm Weight 2.7 kg

Tomsk

Produced in: Tomsk

It is designed to accommodate twenty-four tubes with a diameter of 30 mm when thermostated in a laboratory bath LB33 or LB33-Sh. The height-adjustable bottom allows the tubes to be immersed in the coolant to the required depth. Overall dimensions 310x250x210 mm Weight 1.5 kg

Tomsk

Produced in: Tomsk

It is designed to accommodate various objects in the inner bath of the CRYO thermostat VT 01. The height-adjustable bottom allows objects to be immersed in the coolant to the required depth. Internal dimensions 105x175x250 mm Weight 1 kg

Tomsk

Produced in: Tomsk

May be interested in

Stand THERMOTEST-100-P

The stand provides convenience when taking measurements, allowing you to set the thermometers at eye level. Designed for calibration thermostat THERMOTEST-100. Overall dimensions 400x625x490 mm

Tomsk

Produced in: Tomsk

Set of devices for BNTI-05-04 GOST 9090

A set of devices is used to determine the oil content in oil paraffins in accordance with the State Standard 9090 and is intended for placement in a liquid bath BNTI 05 04.

Tomsk

Produced in: Tomsk

KF flanges in the assortment

Kazan

Produced in: Kazan

Glass cuvette 20x42x13 mm

from 1 150 ₽

It is designed for the devices KFK–2, KFK–3 and their modifications when operating in the spectral range from 315 to 980 nm. It is chemically resistant to acids (except hydrofluoric acid) and dilute alkalis.

Suponevo

Produced in: Bryansk region

LB33-187/1K Basket

It is designed for thermostating glasses, flasks and evaporating cups with samples in the laboratory bath LB33 and LB33-Sh. Overall dimensions 310x250x210 mm Weight 2.0 kg

Tomsk

Produced in: Tomsk

Vladimir Machining Center

Vladimir

Produced in: Vladimir

Device for lifting and lowering samples LA-220

Designed for immersion of objects in the baths of LOIP LT thermostats and LOIP LB-200 precision thermostatic baths to a predetermined depth. Thermostatable objects are placed on a movable pallet, which can be fixed at any required depth. The device is installed on the casing of thermostats and precision thermostatic baths instead of a hinged lid and is equipped with its own removable lid. Bath volume, l 17 and 24 Pallet size, mm 260x320 Maximum immersion depth, mm 200

LOIP

Saint Petersburg

accessories

general laboratory

specimen lifting-lowering device

Produced in: Saint Petersburg

CRYO-MT-17-K basket

The height-adjustable bottom allows objects to be immersed in the coolant to the required depth. Internal dimensions 110x128x240 mm Weight 1.5 kg

Tomsk

Produced in: Tomsk

It is designed for simultaneous polishing of four copper plates measuring 75×12.5×2 mm used in determining the corrosive effect of fuels in accordance with GOST ISO 2160, GOST 32329, GOST 6321, GOST 2917 and ASTM D130.

Tomsk

Produced in: Tomsk

ConFlat (CF) standard connections are used to ensure the connection of components of vacuum systems operating in the field of high and ultra-high vacuum.

Kazan

Produced in: Kazan

Heating element for 1.5 kW 220 V distiller

from 1 860 ₽

The tank for the 1.5 kW aquadistillator is made of stainless steel.

Belgorod

Produced in: Belgorod

Adapter LT-300-A

It is used to connect LT-300 thermometers to a personal computer via a USB interface. This is a "native" device for the ThermoChart program. The use of this adapter does not require the installation of additional drivers because it uses the HID driver built into the operating system to exchange data.

Tomsk

Produced in: Tomsk

ConFlat (CF) standard connections are used to ensure the connection of components of vacuum systems operating in the field of high and ultra-high vacuum.

Kazan

Produced in: Kazan

Tomsk

Produced in: Tomsk

ConFlat (CF) standard connections are used to ensure the connection of components of vacuum systems operating in the field of high and ultra-high vacuum.

Kazan

Produced in: Kazan