Spring THERMOTEST holder-DP1-9/16

It is necessary for accurate temperature maintenance in external objects. The diameter and length of the submerged part are 3 and 240 mm, respectively. The nominal static characteristic of Pt1000.

It is used for determining the pour point of petroleum products in accordance with GOST 20287 (method B).

The stainless steel stand is designed for installation and storage of pressure gauges MTIf 100, MTIf 160 and MTIf 400 in the process of determining the absolute vapor pressure of volatile crude oil and volatile non-viscous petroleum products. Overall dimensions 170x95x105 mm Weight 0.5 kg

It is used for determining the low-temperature characteristics of petroleum products and organic chemical products in accordance with the State Standard 20287 (method A), EN 23015, ASTM D97 and GOST 18995.5.

It is designed to accommodate 26 tubes with a diameter of up to 12 mm when thermostated in the inner bath of a low-temperature liquid thermostat CRYO-VT-12 or CRYO-VT-12-1. Overall dimensions 130x78x170 mm Weight 0.2 kg

It is designed for simultaneous polishing of four copper plates measuring 75×12.5×2 mm used in determining the corrosive effect of fuels in accordance with GOST ISO 2160, GOST 32329, GOST 6321, GOST 2917 and ASTM D130.

The ISO-KF connection (DIN 28 403 and ISO 2861) allows quick installation and replacement of components in vacuum systems. The connection consists of two symmetrical ISO-KF flanges (1), a centering ring with an O-ring seal (2) and a quick-release clamp (3). High-vacuum ISO-KF connections can be mounted without using a tool by simply turning the nut of the quick-release clamp.

Designed for immersion of objects in the baths of LOIP LT thermostats and LOIP LB-200 precision thermostatic baths to a predetermined depth. Thermostatable objects are placed on a movable pallet, which can be fixed at any required depth. The device is installed on the casing of thermostats and precision thermostatic baths instead of a hinged lid and is equipped with its own removable lid. Bath volume, l 12 and 16 Pallet size, mm 260x140 Maximum immersion depth, mm 200

Number of sockets, pcs 21 Hole diameter, mm 17 Immersion depth, mm 200 Overall dimensions (WxDxH), mm 180x80x215

Number of sockets, pcs 33 Hole diameter, mm 17 Immersion depth, mm 200 Overall dimensions (WxDxH), mm 235x80x215

The stand provides convenience when taking measurements, allowing you to set the thermometers at eye level. Designed for calibration thermostat THERMOTEST-100. Overall dimensions 400x625x490 mm

The ISO-KF connection (DIN 28 403 and ISO 2861) allows quick installation and replacement of components in vacuum systems. The connection consists of two symmetrical ISO-KF flanges (1), a centering ring with an O-ring seal (2) and a quick-release clamp (3). High-vacuum ISO-KF connections can be mounted without using a tool by simply turning the nut of the quick-release clamp.

The safety valves are conveniently fixed with magnets, and in the working position they can be fixed in the lower part of the case, without interfering with access to the thermometer.

Metal cylinder for hydrometers of the size 50×500 mm. Designed for thermostats VT RO 01, VT RO 02 and CRYO-VT RO 03.

The distillate cooler is installed directly on the body of the aquadistillator and provides cooling of the finished distillate from 80 ° C to 40 ° C.

Number of sockets, pcs 14 Hole diameter, mm 25 Immersion depth, mm 200 Overall dimensions (WxDxH), mm 235x80x215