Holder THERMOTEST-D2-9/16

The stand provides convenience when taking measurements, allowing you to set the thermometers at eye level. Designed for calibration thermostat THERMOTEST-100. Overall dimensions 400x625x490 mm

A set of devices is used to determine the oil content in oil paraffins in accordance with the State Standard 9090 and is intended for placement in a liquid bath BNTI 05 04.

It is designed for the devices KFK–2, KFK–3 and their modifications when operating in the spectral range from 315 to 980 nm. It is chemically resistant to acids (except hydrofluoric acid) and dilute alkalis.

It is designed for thermostating glasses, flasks and evaporating cups with samples in the laboratory bath LB33 and LB33-Sh. Overall dimensions 310x250x210 mm Weight 2.0 kg

Designed for immersion of objects in the baths of LOIP LT thermostats and LOIP LB-200 precision thermostatic baths to a predetermined depth. Thermostatable objects are placed on a movable pallet, which can be fixed at any required depth. The device is installed on the casing of thermostats and precision thermostatic baths instead of a hinged lid and is equipped with its own removable lid. Bath volume, l 17 and 24 Pallet size, mm 260x320 Maximum immersion depth, mm 200

The height-adjustable bottom allows objects to be immersed in the coolant to the required depth. Internal dimensions 110x128x240 mm Weight 1.5 kg

It is designed for simultaneous polishing of four copper plates measuring 75×12.5×2 mm used in determining the corrosive effect of fuels in accordance with GOST ISO 2160, GOST 32329, GOST 6321, GOST 2917 and ASTM D130.

ConFlat (CF) standard connections are used to ensure the connection of components of vacuum systems operating in the field of high and ultra-high vacuum.

The tank for the 1.5 kW aquadistillator is made of stainless steel.

It is used to connect LT-300 thermometers to a personal computer via a USB interface. This is a "native" device for the ThermoChart program. The use of this adapter does not require the installation of additional drivers because it uses the HID driver built into the operating system to exchange data.

ConFlat (CF) standard connections are used to ensure the connection of components of vacuum systems operating in the field of high and ultra-high vacuum.

Four workstations with a diameter of 140 mm and a height-adjustable bottom allow the sample containers to be immersed in the coolant to the required depth. Overall dimensions 515x310x215 mm Weight 3.5 kg

ConFlat (CF) standard connections are used to ensure the connection of components of vacuum systems operating in the field of high and ultra-high vacuum.

The tank for the 3.0 kW aquadistillator is made of stainless steel.

It is designed to accommodate thermostatically controlled objects in the inner bath of the T40 liquid thermostat. A basket with a height-adjustable bottom allows objects to be immersed in the coolant to the required depth. Overall dimensions 305x305x390 mm Internal dimensions 260x250mm Weight 2.8 kg