Silicone hose 10x2 with thermal insulation

Vials are used to protect the basic properties of chemical, pharmaceutical and other liquid, paste-like, mixed fluid products. Designed for scientific research. Not intended for medical use. Material: Polypropylene (polypropylene copolymers). The addition of a nucleator (illuminator) is allowed for greater hardness (if necessary). Color: Transparent. Autoclaving process is performed for 30 minutes at a temperature of + 121OC and a pressure of 2.1 atm. Drying is carried out at +85OC for 3 hours. The products are resistant to substances containing active chlorine, guanidine, alcohols, acetone

Vacuum electric furnace with accelerated argon cooling system for heat treatment

Bottles are used to protect the basic properties of chemical, pharmaceutical and other liquid, paste-like, mixed fluid products. Designed for scientific research. Not intended for medical use. Bottle: low density polyethylene (LDPE). Cover: polypropylene (polypropylene copolymers). The addition of a nucleator (illuminator) is allowed for greater hardness (if necessary).

The 96-hole tablet of the standard profile is made of ultrapure polypropylene for PCR. The wells have thin walls (0.3-0.35 mm.), providing rapid heat exchange, allowing optimal amplification results to be achieved. The wells are easily separated from each other in any direction into any number of tubes (up to a single one). Compatible with SFG adapters for PCR amplifiers. Tablets are convenient both for high-performance laboratories and for single analyses. The presence of a skirt — Without a skirt Material — Ultrapure Polypropylene The wall thickness is 0.3 — 0.35 mm. Color — White Sterility — Heat treatment in an autoclave at 121 °C for 15 minutes. Marking — Alphanumeric with engraving Profile: Standard

Silicone hose with an internal diameter of 18 mm is used to connect the CRYO-VT-07 thermostat or A600 circulation cooler to external consumers.

A viton hose with an internal diameter of 10 mm is used to connect the VTi CRYO-VT series thermostats to external consumers or as a jumper hose. We recommend it for use with PMS heat carriers

For thermostats operating at high temperatures and filled with an ICP coolant, a viton hose with a cross section of 10/14 should be used as a jumper hose.

It is designed to prevent the flask from surfacing when it is thermostated in a laboratory bath or liquid thermostat.

Silicone hose with an inner diameter of 8 mm is used to connect circulation coolers A160 and A300 with thermostats of the W series or to external consumers.

It is designed to prevent the flask from surfacing when it is thermostated in a laboratory bath or in a liquid thermostat.

Laboratory stick, disposable, for separating and removing a clot of p/s A stick for separating, removing a clot is a professional laboratory tool. It is used in diagnostic and research medical institutions, in biological and microbiological laboratories, etc. A smooth polystyrene stick can be used for decanting when separating sediment, biological material, and blood clot separation. The stick with a length of 15.7 cm and a diameter of 3 mm is made of transparent impact-resistant polystyrene. On the one hand it has a slightly curved pointed tip, on the other hand it ends with a flat extension. Country of origin: Russia It is possible to change the color of the goods, the quantity in the package in agreement with the customer!

The stick for mixing reagents is disposable, 120 mm. It is used as an auxiliary product during immunological reactions in the well of the tablet, for mixing samples, reagents, for decanting during sediment separation, separation of blood clot from serum, as a spoon-spatula for weighing bulk substances, spot sampling of semi-liquid and solid clinical, food samples in containers intended for this purpose. The sticks are a plastic rod, at the end of which there is a flattening for ease of use. The flat side of the stick is convenient to collect powder. The sticks are made of impact-resistant polystyrene. Chemically resistant. Production Russia. It is possible to change the color of the goods, the quantity in the package in agreement with the customer!

Silicone hose with thermal insulation and an internal diameter of 18 mm is used to connect the CRYO-VT-07 thermostat or A600 circulation cooler to external consumers.

Silicone hose with thermal insulation and an internal diameter of 8 mm is used to connect the A160 and A300 circulation coolers with the W series thermostats or to external consumers.