Containers for analysis (biological materials)

The film is suitable for all types of thermal cycling, including real-time PCR. Pressure-sensitive adhesive film does not stick to gloves. This premium product guarantees tightness during amplification. Similar to imported samples. Temperature range: -70+100 °C Material: Polyolefin Packaging: 100 pcs.

Format, number of holes: 96 Material of manufacture: Silicone Product Color: Colorless Alphanumeric markings are applied Temperature range: -50 to +130 °C

Adhesive Film for EIA tablets is produced for standard studies. Non-sterile. Optically transparent. The film securely seals the tablet. Moisture-proof, non-toxic, prevents excessive evaporation of water from the wells of the microplate, sedimentation of reagents on their walls, and as a result, the edge effect. Prevents false positive results during EIA. A convenient configuration allows you to cut and detach the film according to the number of holes used in one analysis statement. There is 1 notch in width and 1 notch in length. Thickness: 80 microns. Size:130*90mm Composition: PVC Application temperature: -40°C to +80°C Color: Transparent Packaging: 100 pcs.

PCR film, adhesive. High optical transparency. Low autofluorescence Hydrophobic adhesive is resistant to turbidity. Low level of extractable substances in various solvents. The film is similar in all its characteristics to imported samples. Recommendations for use: The best sealing results are achieved when using an applicator or roller. Perforation is applied. Temperature range: -20°C + 120°C Material: PET Packaging: 100 sheets

Adhesive sealing films for PCR (separable) Material: PET, pharmaceutical grade glue, no pollution. Absence of DNase, RNase, DNA, endotoxin, PCR inhibitor and contamination of the heat source. Product advantage: The film can be used as a whole or divided into 8 strips for use. Product Usage: Suitable for quantitative fluorescence detection by PCR. High optical transparency, no spontaneous fluorescence. Size: 128*99 mm. Temperature range: -20+120 °C Packing: 50 pieces.

The 96-hole tablet of the standard profile is made of ultrapure polypropylene for PCR. The wells have thin walls (0.3-0.35 mm.), providing rapid heat exchange, allowing optimal amplification results to be achieved. The wells are easily separated from each other in any direction into any number of tubes (up to a single one). Compatible with SFG adapters for PCR amplifiers. Tablets are convenient both for high-performance laboratories and for single analyses. The presence of a skirt — Without a skirt Material — Ultrapure Polypropylene The wall thickness is 0.3 — 0.35 mm. Color — White Sterility — Heat treatment in an autoclave at 121 °C for 15 minutes. Marking — Alphanumeric with engraving Profile: Standard

PCR tablet for 96 wells 0.2 ml., without skirt, standard profile (White)

PCR tablet for 96 wells 0.2 ml., without skirt, standard profile, (Natural)

Volume: 30 ml Material of manufacture: PVC Dimensions: 100 x 50 x 19 mm It is intended for filling with a solution (chemical reagents, reagents, biological fluids, etc. in concentrations used in clinical and diagnostic laboratories, with the exception of concentrated organic solvents) with the subsequent selection of this solution by dispensers during diagnostic studies in medical and preventive and research laboratories.

Volume: 30 ml Material of manufacture: PS Product Color: White Dimensions: 100 x 50 x 19 mm It is intended for filling with a solution (chemical reagents, reagents, biological fluids, etc. in concentrations used in clinical and diagnostic laboratories, with the exception of concentrated organic solvents) with the subsequent selection of this solution by dispensers during diagnostic studies in medical and preventive and research laboratories.

Material of manufacture: Plexiglass Product Color: Transparent Tripod legs: rubber (to prevent sliding) For test tubes: 0.2 ml.