Equipment

WB series baths can be used for sample evaporation, incubation, defrosting, conduction of chemical reactions. Temperature setting range, oC +35...+95 Temperature error, oC ±1.0 Protection against temperature exceeding RAINBOW TSR-150S F-C hydraulic thermostat Supply voltage, V 230+-10% Current consumption 3.3 A Power consumption, W 750 Overall dimensions L х W х H, mm 380 x 325 x 260 Bath dimensions L x W x H, mm 290 x 300 x 205 Total / engine capacity, 17.6/14.6 l

Technical specifications: Operating spectral range, nm from 190 to 360 Limits of permissible absolute error of wavelength setting, nm ± 5 Detection limit of anthracene (wavelength 252 nm), ng/cm3, no more than 1 The limit of the permissible value of the relative mean square deviation of the output signal (n =5), % of the retention time over the peak area of 1.5 2 Limits of the permissible value of the relative change in the output signal (peak area) for 4 hours of continuous operation, % ± 5 Overall dimensions (LxWxH), mm, no more: 270x420x190 Weight, kg, not more than 9.5 Power consumption, V· A, not more than 50

Designation: SNO-8.16.8 Temperature: 1200 Open.doors: electromechanical Camera size (w.G.V.):600x1200x400 Regulation zones: 1

The AVB-3 vacuum water ring unit consists of a 3BBH1-3M vacuum water ring pump and an EV-3M water ring vacuum ejector.

The device is designed to analyze the phase composition and structural state of polycrystalline objects of various origins.

Technical characteristics: - Platform movement - reciprocating; - The operating frequency range of the platform vibrations is from 20 to 200 kol/min; - The swing of the platform - 10 mm; - Platform dimensions - 315x210 mm; - Platform capacity: flat-bottomed flask 1000 ml - 2 pcs; flat-bottomed flask 500 ml - 2 pcs; flat-bottomed flask 100 ml - 4 pcs; - Maximum power consumption - 120 W; - AC power supply (50 Hz) - 220 ± 10 V; - Overall dimensions - 350x295x150 mm; - Weight - 13.0 kg.

The microprocessor control module allows the user to set the values of the temperature control parameters, calibrate and, if necessary, correct the readings of the built-in temperature sensor; displays information about the current state of the system; performs fault diagnostics, storing information in memory until the next check, and also provides automatic shutdown of the device when the working fluid level drops below the permissible level. Thermometers are installed in a three-tiered stainless steel tripod. Technical specifications: Temperature range, °C without external cooling (Current+10)...+150 with tap water cooling (Tvody+5)...+150 with cryostat cooling 0+150 Number of places for thermometers 15

The electric drying cabinet SHS-14/2.5 is designed for drying, heating various materials in air environment at a maximum temperature of 250 ° C. Technical specifications The electric cabinet operates at ambient temperature from 10 to 35 ° C and relative humidity up to 80% at 25 ° C. Operating temperature- 250 ⁰C Power consumption - 1000 watts Dimensions of the working chamber WxDxH- 195x340x195 mm Dimensions WxDxH- 325x600x445 mm Weight - 16 kg

It is designed to maintain a set temperature of a liquid coolant circulating both in an internal bath and in external closed-type consumers. Feed pump for external closed-type thermostating systems. All-metal stamped tub with a volume of 10 liters and a depth of 200 mm. The stability and uniformity of the temperature in the inner bath is not worse than ± 0.1 ° C. The operating temperature range is +20...+200 °C. The volume of the bath is 10 liters Overall dimensions 400x275x480 mm The open part of the bath is 120x200 mm Bath depth 200 mm Weight 14 kg Power consumption 2.2 kW

Devices capable of generating oxygen have found the widest application in various fields of medicine. The equipment is also used in training centers, educational institutions and oxygen rooms. Medical oxygen concentrators allow to accelerate the recovery of patients suffering from cardiovascular diseases, chronic respiratory diseases, as well as other pathologies that make it difficult to saturate the blood with oxygen. This equipment is a mandatory equipment for anesthesiology and intensive care units. Oxygen concentrators demonstrate high efficiency in restorative treatment. Unlike oxygen sources, which use compressed gas, generators are characterized by high safety and efficiency Capacity: 800 l/min 48.0 m3/h 63.8 kg/h Oxygen purity: 95 % Oxygen pressure: 4-5 bar