Catalog
Back to search results
NV-1200 SHV-U Fume cupboard with plumbing and countertop made of granite tiles
Back to search results
NV-1200 SHV-U Fume cupboard with plumbing and countertop made of granite tiles
from
48 282 ₽
from
48 282 ₽
Go to the manufacturer's website
The Kors NV-1200 SHV-U laboratory fume hood is a single—frame cabinet with a ceramic granite countertop 1100 mm wide and a small built-in polypropylene sink.
External dimensions of the cabinet (W×D×H): 1100×700×1960 mm.
Dimensions of the working area (W×D×H): 1068×540×750 mm.
Table top: granite tiles.
Reliable fume cupboard for laboratories
The cabinet is available in two versions: with a hood from the lower cabinet and without it. In a cabinet with a hood, various aggressive reagents can be stored, in a cabinet without a hood, it is better to store only laboratory glass or instruments.
Working surface material: porcelain tile. It is moisture-resistant and perfectly withstands high temperatures. It is resistant to prolonged exposure to concentrated acids, alkalis and organic solvents. Limited resistance to hydrofluoric acid. This is one of the most popular types of countertops for laboratory furniture.
The small sink-drain is made of polypropylene, resistant to aggressive chemicals. Its diameter is 135 mm and its depth is 110 mm.
The base of the cabinet is made on an all-welded metal frame in powder coating. The side laminated panels (chipboard 16 mm thick) are edged on the facade with a durable PVC edge 2 mm thick, which increases their impact resistance and mechanical strength.
The cabinet legs are adjustable in height within two centimeters, allowing you to place the cabinet even on a fairly uneven floor.
Working area of the fume cupboard
The working area is closed by one lifting frame with a counterweight. It has two exhaust zones: the hood of the exhaust box and the level of the countertop. Diameter of the flange for connection to the ventilation system: 150 mm.
Working area size (W×D×H): 1068×540×750 mm. Please note that the cabinet narrows upwards. At a height of 50 cm, the depth of the working area will be 410 mm, at a height of 70 cm: 365 mm. If you need to place high equipment, then make sure that it is small enough in length, otherwise you will not be able to close the cabinet.
The working area is illuminated by a fluorescent lamp (included in the package). The switch is located on the right side of the cabinet, next to the sockets.
The fume cupboard is equipped with two sockets, one of them with grounding. Sockets have the IP20 degree of protection, maximum load: 1.5 kW.
What are the other options?
If you need to place large equipment, you may be interested in the cabinets for muffle furnaces. Also in the line there are large cabinets with plumbing fixtures: NV-1500 NV-U and two-frame NV-1500 SHV-U and NV-1800 SHV-U.
External dimensions of the cabinet (W×D×H): 1100×700×1960 mm.
Dimensions of the working area (W×D×H): 1068×540×750 mm.
Table top: granite tiles.
Reliable fume cupboard for laboratories
The cabinet is available in two versions: with a hood from the lower cabinet and without it. In a cabinet with a hood, various aggressive reagents can be stored, in a cabinet without a hood, it is better to store only laboratory glass or instruments.
Working surface material: porcelain tile. It is moisture-resistant and perfectly withstands high temperatures. It is resistant to prolonged exposure to concentrated acids, alkalis and organic solvents. Limited resistance to hydrofluoric acid. This is one of the most popular types of countertops for laboratory furniture.
The small sink-drain is made of polypropylene, resistant to aggressive chemicals. Its diameter is 135 mm and its depth is 110 mm.
The base of the cabinet is made on an all-welded metal frame in powder coating. The side laminated panels (chipboard 16 mm thick) are edged on the facade with a durable PVC edge 2 mm thick, which increases their impact resistance and mechanical strength.
The cabinet legs are adjustable in height within two centimeters, allowing you to place the cabinet even on a fairly uneven floor.
Working area of the fume cupboard
The working area is closed by one lifting frame with a counterweight. It has two exhaust zones: the hood of the exhaust box and the level of the countertop. Diameter of the flange for connection to the ventilation system: 150 mm.
Working area size (W×D×H): 1068×540×750 mm. Please note that the cabinet narrows upwards. At a height of 50 cm, the depth of the working area will be 410 mm, at a height of 70 cm: 365 mm. If you need to place high equipment, then make sure that it is small enough in length, otherwise you will not be able to close the cabinet.
The working area is illuminated by a fluorescent lamp (included in the package). The switch is located on the right side of the cabinet, next to the sockets.
The fume cupboard is equipped with two sockets, one of them with grounding. Sockets have the IP20 degree of protection, maximum load: 1.5 kW.
What are the other options?
If you need to place large equipment, you may be interested in the cabinets for muffle furnaces. Also in the line there are large cabinets with plumbing fixtures: NV-1500 NV-U and two-frame NV-1500 SHV-U and NV-1800 SHV-U.
Exhaust cabinet LAB-1800 SHVF-N
Working surface: FRIDURIT 20mm
Length, mm: 1838
Depth, mm: 726
Height, mm: 2100
equipment
Working box
front anti–spill side - TRESPA TopLab
sink-drain (ceramics, internal size 250*95*112mm), water pipe
the package includes
a siphon
gofroslang
two flexible eyeliners 1200mm long
melamine body 16mm thick
2 lifting screens with the possibility of fixing at any height – tempered glass with a thickness of 5mm, lifting 0-700mm, increase the height of the cabinet at full lifting by 450mm
LOIP
Saint Petersburg
Produced in: Saint Petersburg
NV-1800 SHVD-PB Two-frame fume cupboard with a table top made of polypropylene
from
86 117 ₽
The Korsa NV-1800 SHVD laboratory fume cupboard is a two—frame cabinet with a width of 1800 mm with a table top made of polypropylene.
External dimensions of the cabinet (W×D×H): 1800×700×1960 mm.
Dimensions of the working area (W×D×H): 1768×540×750 mm.
Table top: polypropylene.
A reliable fume cupboard for laboratories
Working surface material: monolithic polypropylene. It is moisture-resistant, resistant to prolonged exposure to concentrated acids, alkalis and organic solvents. Poorly resistant to high temperatures. Polypropylene countertops are suitable for chemical laboratories that work a lot with concentrated inorganic acids and alkalis.
The working area is closed by two independent lifting frames with counterweights. It has two exhaust zones: the hood of the exhaust box and the level of the countertop. Diameter of the flange for connection to the ventilation system: 150 mm.
Working area size (W×D×H): 1768×540×750 mm. Please note that the cabinet narrows upwards. At a height of 50 cm, the depth of the working area will be 410 mm, at a height of 70 cm: 365 mm. If you need to place high equipment, then make sure that it corresponds to the dimensions of the camera, otherwise you will not be able to close the cabinet.
The height of the raised glass above the cabinet: 510 mm, that is, with the glass raised, the total height of the cabinet will be 2470 mm.
The working area is illuminated by an LED lamp (included in the package). The switch is located on the right-hand side of the cabinet, next to the sockets.
The fume cupboard is equipped with two sockets, one of them with grounding. Sockets have the IP20 degree of protection, maximum load: 1.5 kW.
The base of the cabinet is an all-welded metal frame in powder coating. The side laminated panels (chipboard 16 mm thick) are edged on the facade with a durable 2 mm PVC edge, which increases their impact resistance and mechanical strength.
The cabinet legs are adjustable in height within two centimeters, allowing you to place the cabinet even on a rather uneven floor.
NV LAB
Moscow
Produced in: Moscow, Moscow region
Supply and exhaust cabinet with drainage system for working with fuming acids LAB-PRO SHPVK 120.86.230 PP
BASIC EQUIPMENT
Working box
front guide posts – aluminum profile painted with powder paint (RAL 7035/RAL 5023), in the right rack there are a light switch and 2 splash–proof sockets with a 3.2kW cover (IP54)
front anti–spill side - polypropylene
working surface - polypropylene 15mm thick
removable plate 600*600mm with a ceramic granite work surface for placement heating plates (1 pc.)
2 dependent lifting screens filled with transparent PVC, 5mm thick in a polypropylene frame
in the lower screen – sliding doors made of transparent PVC with a thickness of 5mm
lifting 0-780mm, does not change the dimensions of the cabinet when lifting
counterweights are placed in the front pillars-pylons and are easily serviced
upper fixed screen – polypropylene
inner part the working box is a fully sealed polypropylene capsule with a back wall washing system, a drainage channel and a polypropylene pipe for cold water
3 levels of hoods
easily removable polypropylene exhaust canopies
polypropylene drain sink
on the top panel are placed:
LED dust- and moisture-proof lamp (2x10W IP65) separated from the workspace by transparent PVC
switching box with automatic emergency power off 16A
flange with damper plug for air inflow d=200mm
flange with aspiration collector for air outflow d=250mm (distance from the rear panels up to the center of the flange – 155mm)
cabinet ventilation system
LOIP
Saint Petersburg
Produced in: Saint Petersburg
HB-1500 SHV-B Fume cupboard with countertop made of porcelain tile
from
48 280 ₽
The Kors NV-1500 SHV-B laboratory fume cupboard is a single—frame cabinet with a width of 1410 mm with a countertop made of granite tiles.
External dimensions of the cabinet (W×D×H): 1410×700×1960 mm.
Dimensions of the working area (W×D×H): 1378×540×750 mm.
Table top: granite tiles.
A convenient fume cupboard for comfortable work in the laboratory
The cupboard is available in two versions: with a hood from the lower cabinet and without such a hood. In a cabinet with a hood, various aggressive reagents can be stored, in a cabinet without a hood, it is better to store only laboratory glass or instruments.
Working surface material: porcelain tile. It is moisture-resistant and perfectly withstands high temperatures. It is resistant to prolonged exposure to concentrated acids, alkalis and organic solvents. Limited resistance to hydrofluoric acid. This is one of the most popular types of countertops for laboratory furniture.
Working area dimensions (W×D×H): 1378×540×750 mm. Please note that the cabinet narrows upwards. At a height of 50 cm, the depth of the working area will be 410 mm, at a height of 70 cm: 365 mm. If you need to place high equipment, then make sure that it corresponds to the dimensions of the camera, otherwise you will not be able to close the cabinet.
The height of the raised glass above the cabinet: 510 mm, that is, when the glass is raised, the height of the cabinet will be 2470 mm.
The working area is closed by a lifting frame with a counterweight. As standard, there are two exhaust zones: the hood of the exhaust box and the level of the countertop. Diameter of the flange for connection to the ventilation system: 150 mm. A version with an additional hood from the lower cabinet is also available (the flange diameter is also 150 mm).
The NV-1500 SHV-B fume cupbpard is equipped with a fluorescent lamp with a switch and two sockets, one of them with grounding. Sockets have the IP20 degree of protection, the maximum load on them: 1.5 kW.
The working chamber is an all-welded metal frame in powder coating. Load-bearing laminated panels (chipboard with a thickness of 16 mm) are edged along the facade with a durable PVC edge with a thickness of 2 mm, which increases the impact resistance and mechanical strength of the products.
The cabinet legs are adjustable in height within two centimeters, allowing you to place the cabinet even on a rather uneven floor.
NV LAB
Moscow
Produced in: Moscow, Moscow region
NV-1200 SHV-M Fume cupboard without a cabinet with a table top made of chipboard
from
35 150 ₽
NV-1200 SHV-M is the most low-budget exhaust cupboard of the NV line. It is single-frame, with a laminated countertop. It is intended mainly for analytical laboratories.
External dimensions of the cabinet (W×D×H): 1100×700×1960 mm.
Dimensions of the working area (W×D×H): 1068×540×750 mm.
Table top: laminated chipboard.
A minimalistic solution for your laboratory
The NV-1200 SHV-M fume cupboard has a minimum of functions, which makes it the most inexpensive.
The table top is made of laminated chipboard. It is relatively moisture-resistant, resistant to short-term exposure to acids, alkalis and organic solvents. This countertop does not tolerate strong heating or prolonged exposure to solvents, concentrated acids and alkalis.
The working area is closed by one lifting frame with a counterweight. It has two exhaust zones: the hood of the exhaust box and the level of the countertop. Diameter of the flange for connection to the ventilation system: 150 mm.
Working area size (W×D×H): 1068×540×750 mm. Please note that the cabinet narrows upwards. At a height of 50 cm, the depth of the working area will be 410 mm, and at a height of 70 cm: 365 mm. If you need to place high equipment, then make sure that it corresponds to the dimensions of the camera, otherwise you will not be able to close the cabinet.
The height of the raised glass above the cabinet: 510 mm, that is, with the glass raised, the total height of the cabinet will be 2470 mm.
The working area is illuminated by a fluorescent lamp (included in the package). The switch is located on the right side of the cabinet body.
The base of the cabinet is made on an all-welded metal frame in powder coating. The side laminated panels (chipboard 16 mm thick) are edged on the facade with a durable PVC edge 2 mm thick, which increases their impact resistance and mechanical strength.
The cabinet legs are adjustable in height within two centimeters, allowing you to place the cabinet even on a fairly uneven floor.
And what are the other options?
In the line of NV-1200 cabinets there is a cabinet with plumbing and a surface made of granite tiles, as well as cabinets without plumbing, and with a surface made of monolithic ceramics, stainless steel, chemically resistant plastic. They are exactly the same size as the NV-1200 SHV-M.
If you need a minimalistic cabinet of large sizes, you could be interesteed in the NV-1500 SHV-M model.
NV LAB
Moscow
Produced in: Moscow, Moscow region
Exhaust cabinet for working with acids LAB-PRO SHVK 120.84.230 VI
BASIC EQUIPMENT:
Working box
front guide posts – aluminum profile painted with powder paint (RAL 7035/RAL 5023), in the right rack there is a light switch and 2 splash–proof sockets with a 3.2kW cover (IP54)
the front anti-spill side is acid-resistant polished stainless steel. AISI 316 steel
rear, upper, side panels – metal painted with powder paint (RAL 7035) with the texture of shagreen leather
inner capsule made of polypropylene lined with ceramic plates of the rear and side panels to a height of 380mm
2 dependent lifting screens – tempered glass in aluminum frames, lifting 0-780mm, do not change the dimensions of the cabinet when lifting
the upper fixed screen – polypropylene
on the upper panel:
LED dust– and moisture-proof lamp 2x10 W (IP65) is separated from the workspace by tempered glass with a thickness of 4mm
flange d=250mm (distance from the back panel to the center of the flange - 170mm)
switching box with automatic emergency power off 16A
3 exhaust levels
easily removable exhaust visors
counterweights are placed in the front pylon racks and are easily serviced
Frame base
collapsible frame made of rectangular metal profile painted with powder paint (RAL 7035) with the texture of shagreen leather
service panel - aluminum profile painted with powder paint (RAL 5023) with the texture of shagreen leather
adjustable supports
LOIP
Saint Petersburg
Produced in: Saint Petersburg
NV-1250 SHV-BC Fume cupboard with countertop made of monolithic ceramics
from
46 412 ₽
THe Kors NV-1250 SHV-BC laboratory fume cupboard is a single—frame cabinet with a width of 1240 mm and with a table top made of monolithic ceramics.
External dimensions of the cabinet (W×D×H): 1240×700×1960 mm.
Dimensions of the working area (W×D×H): 1208×660×1072 mm.
Table top: monolithic ceramic.
Convenient fume cupboard for comfortable work in the laboratory
The table top made of monolithic ceramics is moisture-resistant, perfectly withstands high temperatures. Due to the lack of seams, ceramic granite tiles are better resistant to chemicals and heat. It is possible to place high-temperature equipment on it.
The working area is closed by a single lifting frame with a counterweight. There are two exhaust zones in it: the hood of the exhaust box and the level of the countertop. Diameter of the flange for connection to the ventilation system: 150 mm.
Working area size (W×D×H): 1208×540×750 mm. Please note that the cabinet narrows upwards. At a height of 50 cm, the depth of the working area will be 410 mm, at a height of 70 cm it will be 365 mm. If you need to place high equipment, then make sure that it corresponds to the dimensions of the camera, otherwise you will not be able to close the cabinet.
The height of the raised glass above the cabinet: 510 mm, that is, when the glass is raised, the height of the cabinet will be 2470 mm.
The working area is illuminated by a fluorescent lamp (included in the package). The switch is located on the right side of the cabinet, next to the sockets.
The fume cupboard is equipped with two sockets, one of them with grounding. Sockets have the IP20 degree of protection, maximum load: 1.5 kW.
The base of the cabinet is an all-welded metal frame in powder coating. The side laminated panels (chipboard 16 mm thick) are edged on the facade with a durable PVC edge 2 mm thick, which increases their impact resistance and mechanical strength.
The cabinet legs are adjustable in height within two centimeters, allowing you to place the cabinet even on a rather uneven floor.
And if we need a cabinet for muffle furnaces?
If you need a cabinet to accommodate high-temperature equipment, you might be interested in the ballscrew models. The depth of the countertop is specially increased so that you can put an oven or a cabinet.
NV LAB
Moscow
Produced in: Moscow, Moscow region
Exhaust cabinet for working with LVZH LAB-PRO SHVLVZH-TB 180.74.230 KG
BASIC EQUIPMENT
Working box
front guide posts – aluminum profile painted with powder paint (RAL 7035/RAL 5023), in the right rack there are a light switch and 2 splash–proof sockets with a 3.2kW cover (IP54)
the front anti-spill side is acid-resistant polished stainless steel. AISI 304 steel
back, top, side panels – metal painted with powder paint (RAL 7035) with the texture of shagreen leather
2 dependent lifting screens – tempered glass in aluminum frames, lifting 0-780mm, do not change the dimensions of the cabinet when lifting
the upper fixed screen – tempered glass in an aluminum frame
on the top panel:
4 anti-explosion valves
LED dust- and moisture-proof lamp (2X10W IP65) is separated from the workspace by tempered glass thickness of 4mm
flange d=250mm (distance from rear panel to the center of the flange – 170mm)
switching box with automatic emergency power off 16A
easily removable exhaust visors
3 levels of exhaust
on the rear panel:
technological hole d = 60mm with a plastic plug
counterweights are placed in the front pillars-pylons and are easily serviced
Frame base
collapsible frame made of rectangular metal profile painted with powder paint (RAL 7035) with the texture of shagreen leather
front pillars - aluminum profile painted with powder paint (RAL 7035/RAL 5023)
adjustable supports
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Exhaust cabinet for washing dishes LAB-PRO SHVM 120.74.230 TR
BASIC EQUIPMENT
Working box
guide posts – aluminum profile painted with powder paint (RAL 7035/RAL 5023) in the right rack there is a light switch
front anti–spill side - acid-resistant polished stainless steel AISI 304
side panels – tempered glass
2 dependent lifting screens – tempered glass in aluminum frames, lifting 0-780mm, do not change the dimensions of the cabinet when lifting
the upper fixed screen – metal painted with powder paint (RAL 5023) with the texture of shagreen leather
back and top panels – polypropylene
on the top panel:
LED lamp dust- and moisture-proof 10W IP65
switching box with automatic emergency shutdown power supply 16A
flange d=250mm (the distance from the back panel to the center of the flange is 170mm)
easily removable exhaust canopies
3 exhaust levels (lower, side and front)
counterweights are placed in the front pylon racks and are easy to maintain
Frame base
metal pedestal painted with powder paint (RAL 7035) with the texture of shagreen leather
facades – laminated MDF with a thickness of 16mm
handles – polypropylene
2 compartments with locks
1 shelf with the possibility of installation on three levels in any of the compartments (when the cabinet is equipped with 2 bowls, shelves are not included)
flange d=100mm
service panel – aluminum profile painted with powder paint (RAL 5023) with the texture of shagreen leather:
adjustable supports
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Outdoor exhaust cabinet LAB-PRO SHVN 150.100.255
BASIC EQUIPMENT
guide racks – aluminum profile painted with powder paint (RAL 7035/RAL 5023) in the right rack there are a light switch and 3 splash–proof sockets with a 3.2kW cover (IP54)
in the left rack there are a water valve and a nitrogen
valve rear, side panels – HPL plastic SLOPLAST LAB with a thickness of 4mm
bottom - TRESPA Top Lab with a thickness of 6mm
3 dependent lifting screens – tempered glass in aluminum profile frames, lifting 0-1800mm, do not change the dimensions of the cabinet when lifting, the middle and upper screens are equipped with sliding glass doors made of tempered glass with a thickness of 4mm
upper fixed screen – polypropylene in an aluminum profile frame
upper panel, primary vapor condensation system (scrubber) – polypropylene
on the top panel:
LED lamp dust– and moisture-proof (2x22 W IP65)
flange d=250mm (distance from the back panel to the center of the flange - 155mm)
switching box with automatic emergency power off 16A
6 extraction levels
technological hole d =50mm with a plug and outlet at the bottom of the right sidewall and right rear rack
counterweights are placed in the front pylon racks and are easily serviced
on the left side panel service module with cold water and nitrogen supply pipes on the service panel there is a wall-mounted drain sink made of polypropylene.
(ext. size 250*100*150mm)
pipe d/water
pipe d/nitrogen
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Exhaust cabinet LAB-1200 SHV MET
Working surface: Porcelain stoneware (ceramic tile 300*300mm)
Length, mm: 1200
Depth, mm: 740
Height, mm: 2100
Working box
the working surface is ceramic tile, resistant to concentrated acids, alkalis, organic solvents and high temperatures)
the size of the working space – 1130*600* 1090mm
front anti–spill side - TRESPA TopLab
sink-drain (polypropylene, internal size 250*100*150mm), water pipe
the package includes a siphon, a gofroflang, 2 flexible eyeliners with a length of 1200mm
the body is metal, painted with white powder paint
2 dependent lifting screens with the possibility of fixing at any height – tempered glass with a thickness of 5mm in aluminum frames, lifting 0-700mm, do not change the dimensions of the cabinet when lifting
the upper fixed screen – metal painted with white powder paint
LOIP
Saint Petersburg
Produced in: Saint Petersburg
NV-1500 SHV-SPB Fume cupboard with countertop made of chemical-resistant plastic
from
48 855 ₽
The Korsa NV-1500 SHV-SPB Laboratory fume cupboard is a single—frame cabinet with a width of 1410 mm with a countertop made of chemical-resistant plastic.
External dimensions of the cabinet (W×D×H): 1410×700×1960 mm.
Dimensions of the working area (W×D×H): 1378×540×750 mm.
Table top: chemically resistant plastic.
A reliable fume cupboard for laboratories
Working surface material: chemical resistant plastic. It is moisture-resistant, resistant to prolonged exposure to concentrated acids and alkalis. It has limited resistance to high temperature and to prolonged exposure to organic solvents. It is a popular choice for laboratories, suitable for training workshops, analytical and medical laboratories. Ovens or drying cabinets should not be placed on such a countertop.
The working area is closed by one lifting frame with a counterweight. There are two exhaust zones in it: the hood of the exhaust box and the level of the countertop. Diameter of the flange for connection to the ventilation system: 150 mm.
Working area size (W×D×H): 1378×540×750 mm. Please note that the cabinet narrows upwards. At a height of 50 cm, the depth of the working area will be 410 mm, at a height of 70 cm: 365 mm. If you need to place high equipment, then make sure that it corresponds to the dimensions of the camera, otherwise you will not be able to close the cabinet.
The height of the raised glass above the cabinet: 510 mm, that is, with the glass raised, the total height of the cabinet will be 2470 mm.
The working area is illuminated by an LED lamp (included in the package). The switch is located on the right-hand side of the cabinet, next to the sockets.
The fume cupboard is equipped with two sockets, one of them with grounding. Sockets have the IP20 degree of protection, maximum load: 1.5 kW.
The base of the cabinet is an all-welded metal frame in powder coating. The side laminated panels (chipboard 16 mm thick) are edged on the facade with a durable PVC edge 2 mm thick, which increases their impact resistance and mechanical strength.
The cabinet legs are adjustable in height within two centimeters, allowing you to place the cabinet even on a rather uneven floor.
NV LAB
Moscow
Produced in: Moscow, Moscow region
General purpose exhaust cabinet LAB-PRO SHV 180.84.230 TR
BASIC EQUIPMENT
Working box
guide racks – aluminum profile painted with powder paint (RAL 7035/RAL 5023)in the right rack there are a light switch and 2 splash-proof sockets with a 3.2kW cover (IP54)
the front anti–spill side is acid-resistant polished stainless steel AISI 304
side panels – tempered glass
2 dependent lifting screens – tempered glass in aluminum frames, lifting 0-780mm, do not change the dimensions of the cabinet when lifting
the upper fixed screen – metal painted with powder paint (RAL 5023) with the texture of shagreen leather
back and top panels –
polypropylene LED lamp dust- and moisture-proof (22W IP65)
switching box with automatic emergency power off 16A
flange d=250mm (the distance from the rear panel to the center of the flange is 170mm)
easily removable exhaust visors
3 exhaust levels (lower, side and front)
counterweights are placed in the front pylon racks and are easily serviced
Frame base
collapsible frame made of rectangular metal profile painted with powder paint (RAL 7035) with the texture of shagreen leather
service panel - metal box painted with powder paint (RAL 5023) with the texture of shagreen leather:
adjustable supports
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Exhaust cabinet LAB-M SHV 120.74.210 KG
Furniture for laboratory work.
Exhaust cabinet made of chipboard
Working surface: Porcelain stoneware (ceramic tile 300*300mm), stitching - epoxy compound
Overall dimensions:
Length, mm: 1200
Depth, mm: 740
Height, mm: 2100
equipment
Working box
front anti–spill side - acid–resistant polished stainless steel AISI 316
housing - white chipboard with a thickness of 16mm
guide posts – aluminum profile painted with powder paint dark gray (RAL 7011)
2 dependent lifting screens – tempered glass in aluminum frames, lifting 0-710mm, do not change the dimensions of the cabinet when lifting.
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Exhaust cabinet for organic synthesis LAB-PRO SHVOS 150.84.230 TR
BASIC EQUIPMENT
Working box
the front guide posts are aluminum profile painted with powder paint (RAL 7035/RAL 5023), in the right rack there are a light switch and 2 splash–proof sockets with a 3.2kW cover (IP54)
the front anti–spill side is acid-resistant polished stainless steel. AISI 304 steel
rear, upper, side panels – metal painted with powder paint (RAL 7035) with the texture of shagreen leather
the inner surfaces of the working box are lined with chemically resistant HPL plastic
2 dependent lifting screens – tempered glass in aluminum frames, lifting 0-780mm, do not change the dimensions of the cabinet when lifting
the upper fixed screen – tempered glass in an aluminum frame
on the upper panel:
LED dust- and moisture-proof lamp (2X10W IP65) is separated from the workspace by tempered glass thickness of 4mm
flange d=250mm (distance from the rear panel to flange center – 170mm)
easily removable exhaust canopies
3 exhaust levels
on the left side panel service module with cold water supply pipe and wall-mounted drain sink made of polypropylene
cold water supply valve in the left rack of the box
counterweights are placed in the front racks-pylons and are easily serviced
Frame base
collapsible frame made of rectangular metal profile painted with powder paint (RAL 7035) with the texture of shagreen leather
service panel - aluminum profile painted with powder paint (RAL 7035/RAL 5023) with the texture of shagreen leather
adjustable supports
module with two drawers
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Exhaust cabinet for muffle furnaces Mod. -1200 SHVMP
from
119 472 ₽
Design features:
The side, back walls and top are made of sheet metal. Automatic emergency power cut-off (16 A), two splash-proof sockets, a light-switch, an electrical box on the base panel's back. Flange to connect to exhaust system of ventilation (200 mm).
The cabinat's base is a relocatable reinforced frame made of steel shaped tube on adjustable bearings.
The exhaust box and the cabinet's base are painted with high-quality powder polymer paint, that protects the cabinet from the external effects of aggressive vapors, mechanical damage and high temperatures.
Additionally, the cabinet can be equipped with a metal box for other supplementary equipment storage, consumables, tools.
PK "Sovremennaya Laboratoriya"
Saint Petersburg
Produced in: Saint Petersburg
Exhaust cabinet LAB-900 SHVF-N
Table top: FRIDURIT 20mm
Length, mm: 938
Depth, mm: 726
Height, mm: 2100
equipment
Working box
front anti–spill side - TRESPA TopLab
sink-drain (ceramics, internal size 250*95*112mm), pipe for water
the package includes
a siphon
corrugated
2 flexible eyeliners with a length of 1200mm
housing – melamine with a thickness of 16mm
lifting screen with the possibility of fixing at any height – tempered glass with a thickness of 5mm, lifting 0-700mm, increase the height of the cabinet at full lifting by 450mm
LOIP
Saint Petersburg
Produced in: Saint Petersburg
ACID-RESISTANT FAN
from
48 620 ₽
The fan body and impeller are made of polypropylene, which has a very high chemical resistance, especially to concentrated inorganic acids and their vapors. The design rules out the contact of the transported air with any parts that are prone to corrosion.
1.Autonomous acid-resistant fan 1200 cubic meters per hour
Width - 570
POLYPROPYLENE - 48 620 ₽
2.Autonomous acid-resistant fan 1200 cubic meters per hour (with a frame for wall mounting)
Width - 570
POLYPROPYLENE - 52 520 ₽
3.Autonomous acid-resistant fan 1700 cubic meters per hour
Width - 664
POLYPROPYLENE- 52 940 ₽
4.Autonomous acid-resistant fan 1700 cubic meters per hour (with a frame for wall mounting)
Width - 664
POLYPROPYLENE - 56 840 ₽
SpetsBaltMebel
г. Санкт- Петербург
Produced in: Saint Petersburg
Aquadistillator medical electric AE- 4/8
from
65 800 ₽
Capacity: 4.0 (-
10%) l/h
Volume of the built
-in water collector: 9.0 l
Heating elements: TEN 3.0 kW 220V
(stainless steel) – 1 pc.
The quality of the produced
water GOST R 58144-2018 "Distilled water",
FS.2.2.0019.18 "Water for
injection"
Type of current, frequency,
voltage:
alternating single-phase, 50
Hz, 220 V
Power consumption: 2.7 kW
Overall dimensions
(L×W×C), mm: 290×320×570
Weight: 13.5 kg
Warranty period: 24 months from
the date of sale
Registration certificate for a medical device
No. FSR 2010/07649 dated
November 01 , 2016
Electrical conductivity
of the produced water: 2-2.5 microns/cm
The temperature of the produced
water is from 70 to 85 °C
Source water flow rate (at t of water 10 °C): 30 (±10%) l/h
Source water pressure: 0.1-0.4 MPa
Version: Desktop with
adjustable supports.
Wall mounting is possible
Coefficient of water purification
from radionuclides: at least 4000
Service life: at least 10 years
Livam
Belgorod
Produced in: Belgorod
SNVS Vacuum Furnace-3.3/12- I2
High-temperature furnaces are capable of heating materials up to 1700 degrees. The scope of their application covers the heat treatment of various materials in an inert medium or vacuum. TULA-TERM furnaces are used for heat treatment of plastics, ceramics, metals, alloys, lacquers and other materials. The equipment allows sintering, annealing, soldering, quenching, drying, burning and molding. In industry, our installations are most often used for quenching parts and sintering hard alloys.
Tula-Term
Tula
Produced in: Tula
Industrial Drying Cabinet SNOL 3000/5
High-temperature industrial drying cabinet SNOL 3000/5 with a working chamber volume of 3000 liters and a maximum operating temperature of 500 degrees with software
Tula-Term
Tula
Produced in: Tula
Vacuum compression furnace SNVS-4,5.5,5/3-I2PD
Vacuum compression furnace SNVS-4,5.5,5/3-I2PD is designed for drying, degassing in vacuum and under pressure at temperatures up to 300 0C.
Tula-Term
Tula
Produced in: Tula
Shaft furnace industrial SSHO-6.18/11
Designation
SSO-6.18/11
Power, kW
40
Diameter, mm
600
Height, mm
1800
Tula-Term
Tula
Produced in: Tula
LI-630 Integrated Vacuum Trap
The LI-630 integrated flanged trap is installed inside the diffusion pump instead of the standard oil reflector, without increasing the overall dimensions of the diffusion pump.
The LI-630 trap performs the function of an oil reflector, is installed instead of a standard oil reflector in pumps, has an additional number of cooled screens for capturing oil return flow vapors (more than that of the MU trap), covers the entire area of the input high-vacuum flange.
Vakuummash
Kazan
Produced in: Kazan
Electric furnace tubular laboratory SUOL 0,4.4/11
from
134 208 ₽
Electric tubular laboratory furnaces are designed for calibration of thermocouples and dilatometers, heat treatment and determination of the melting point of metals, alloys and other work at temperatures up to 1100 ° C in stationary laboratories. SUOL tubular furnaces are used in many industries and agriculture, are indispensable in factory and research laboratories.
Tula-Term
Tula
Produced in: Tula
Circulation thermostat LT-224a
The LOIP LT-224a modification device consists of an immersion thermostat-circulator LOIP LT-200 and a working bath with a flat removable lid.
Technical specifications:
Temperature range:
without external cooling, °C
Current+10 ... +200
with tap water cooling °C
Tvods+5 ...+200
Accuracy of temperature maintenance, °C ± 0.1
The error of setting the set temperature, no more than ° C ± 0.2
Heater power, W 2000
Pump:
max. flow rate, l/min 10.5
pressure, 0.27 bar
Bath volume, l 24
The working fluid is water, water-glycerin mixture, silicone oil.
Open part of the bath / depth, mm 360x296/200
Overall dimensions, mm 535x335x420
Weight, kg 14.2
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Explosion-proof vacuum electric furnace START-215
Vacuum resistance furnaces are necessary for heating products before pressure treatment, for sintering, degassing, quenching, annealing, soldering and chemical-technological processes. Such furnaces among all the variety of thermal equipment are considered the most environmentally friendly – heat treatment is carried out at t up to +2500 ° C in a purified vacuum. Under certain conditions, vacuum furnaces are used to work with neutral gases.
The outer part of the furnace is made of stainless steel and is cooled by liquid. The inner part of the working chamber, where the heat treatment of materials is carried out, is made of an alloy of molybdenum and tungsten. The components are characterized by a low inertia force, reduced gas separation. The settings are available on the control panel, where the instruments, automatic and manual control switches are located.
At every enterprise of the electronic industry, nuclear power, an explosion-proof vacuum resistance furnace is needed. The same applies to areas where various products undergo heat treatment at the stage of production and preparation for use
Tula-Term
Tula
Produced in: Tula
OZIS PHARMA PH 41 Tablet press
Productivity, thousand tab./hour
209
Number of stations
41
Max. pressing force, tn
10
Number of threads
2
Diameter of tablets, mm
6-20
Height of tablets, mm
1.5-9
Matrix filling depth, mm
18
Rotor material
steel 40x13
Filling hopper capacity, l
20(30)
Stepless rotor speed change
The change in the speed of rotation of the feeder
is independent
Supply voltage
380V, 50Hz
Power consumption, kW/hour
5.78
Weight, kg
2400
Dimensions, mm
900x900x1800
POZIS
Зеленодольск
Produced in: Zelenodolsk, Tatarstan
Aquadistillator electric DE-70
from
182 000 ₽
Purpose: obtaining distilled water of 3 types according to GOST R 58144-2018 "Distilled water", FS.2.2.0020.18 "Purified water"
Capacity: 70.0 (-10%) l/h
Heating elements:
electrodes
The quality of the produced water:
GOST R 58144-2018 "Distilled water", FS.2.2.0020.18 "Purified water"
Type of current, frequency, voltage: alternating three-phase, 50 Hz, 380 V
Power consumption: 42.0 kW
Overall dimensions (L×W×C), mm: 740×550×1010
Weight: 64 kg
Warranty period: 14 months from the date of sale
Registration certificate for a medical device
No. FSR 2008/03707 dated December 05 , 2008
Electrical conductivity of the produced water: 3-4.5 microns/cm
The temperature of the produced water: 50 °C
Source water flow rate (at 10 °C water temperature): 500 (+-10%) l/h
Source water pressure: 0.1-0.4 MPa
Overall dimensions of the control unit (L×W×C), mm:
400×220×500
Execution: outdoor
Coefficient of water purification from radionuclides: at least 4000
Service life: at least 8 years
Livam
Belgorod
Produced in: Belgorod
Blue Laser pointers KLM-P450-x-3
Blue laser pointers of the KLM-P405-10-3 series with a collimated beam of low divergence radiation are optimal sources for demonstration purposes.
FTI-Optronik
Saint Petersburg
Produced in: Saint Petersburg
Circulation thermostat LT-111a
The LOIP LT-111a modification device consists of an immersion thermostat-circulator LOIP LT-100 and a working bath with a flat removable lid.
Technical specifications:
Temperature range:
without external cooling, °C Current+10 ... +100
with tap water cooling °C Water+5 ... +100
Accuracy of temperature maintenance, °C ± 0.1
The error of setting the set temperature, no more than ° C ± 0.2
Heater power, W 1900
Pump:
max. flow rate, l/min 7.5
pressure, bar 0.17
Bath volume, l 11
The working fluid is water, water-glycerin mixture.
The open part of the bath / depth, mm 160x240/200
Overall dimensions, mm 268x335x420
Weight, kg 10
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Circulation chiller A600
Buffer bath with a volume of 6 liters.
Feed pump with magnetic coupling for external closed-type thermostating systems.
Cooling capacity 500 W at +20 °C.
The operating temperature range is -10...+80 °C.
Overall dimensions 320x540x470 mm
Weight 37 kg
Power consumption 1.5 kW
Termeks
Tomsk
Produced in: Tomsk
Vacuum membrane pump PL.HM02.02.10 Primelab
from
165 000 ₽
Vacuum membrane pump PL.HM02.02.10 Primelab is an effective, compact and powerful device for creating a vacuum or pumping gases. It makes virtually no noise, is suitable for constant use, and does not cause discomfort. Overheating protection is provided. All chambers are made of fluoroplastic, connections are coated with fluoroplastic, and valves are made of FFKM, which guarantees maximum safety of the device. Elements and parts of the device do not react with working substances. Device performance depends on the camera connection method:
• Independent. Pumping speed – 38 l/min with a maximum of 45 mbar;
• Parallel. Pumping speed – 76 l/min at a maximum pressure of 45 mbar;
• Consistent. Pumping speed – 38 l/min at a maximum pressure of 10 mbar.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
MARK-2010
Portable device for periodic measurement of the volume fraction of oxygen in various gases (hydrogen, natural gas, nitrogen, argon, helium, etc.).
Mainly used for monitoring oxygen in the cooling circuit of generators, electrolysis plants, gas pipelines of boilers, monitoring the air of the working area.
The warranty is 24 months for deliveries across the Russian Federation. High-precision measurement of oxygen microconcentrations
Unique, patent-protected sensor design
Exceptional selectivity to oxygen molecules
Insensitivity to humidity, carbon dioxide, oil vapor
Stable operation in a gas environment of any composition
Ease of operation
Automatic temperature and barocompensation
The duration of measurements is 2-3 minutes
Atmospheric air calibration
Routine maintenance - no more than 1 time per year
Built-in flow stimulator for forced sample delivery
High contrast LED indicator
IP54 housing case
Protection from dust and moisture
Built-in long-lasting battery
At least 1000 charge/discharge cycles
Carrying strap
VZOR
Nizhny Novgorod
Produced in: Nizhny Novgorod