Catalog
Ultraviolet bactericidal installation for emergency disinfection of both air and indoor surfaces in the absence of people (DESAR-OMEGA-02-"KRONT")
Product of the day
from
480000.00
KRONT
Химки
Back to search results
NV-1200 SHV-M Fume cupboard without a cabinet with a table top made of chipboard
Back to search results
NV-1200 SHV-M Fume cupboard without a cabinet with a table top made of chipboard
from
35 150 ₽
from
35 150 ₽
Go to the manufacturer's website
NV-1200 SHV-M is the most low-budget exhaust cupboard of the NV line. It is single-frame, with a laminated countertop. It is intended mainly for analytical laboratories.
External dimensions of the cabinet (W×D×H): 1100×700×1960 mm.
Dimensions of the working area (W×D×H): 1068×540×750 mm.
Table top: laminated chipboard.
A minimalistic solution for your laboratory
The NV-1200 SHV-M fume cupboard has a minimum of functions, which makes it the most inexpensive.
The table top is made of laminated chipboard. It is relatively moisture-resistant, resistant to short-term exposure to acids, alkalis and organic solvents. This countertop does not tolerate strong heating or prolonged exposure to solvents, concentrated acids and alkalis.
The working area is closed by one lifting frame with a counterweight. It has two exhaust zones: the hood of the exhaust box and the level of the countertop. Diameter of the flange for connection to the ventilation system: 150 mm.
Working area size (W×D×H): 1068×540×750 mm. Please note that the cabinet narrows upwards. At a height of 50 cm, the depth of the working area will be 410 mm, and at a height of 70 cm: 365 mm. If you need to place high equipment, then make sure that it corresponds to the dimensions of the camera, otherwise you will not be able to close the cabinet.
The height of the raised glass above the cabinet: 510 mm, that is, with the glass raised, the total height of the cabinet will be 2470 mm.
The working area is illuminated by a fluorescent lamp (included in the package). The switch is located on the right side of the cabinet body.
The base of the cabinet is made on an all-welded metal frame in powder coating. The side laminated panels (chipboard 16 mm thick) are edged on the facade with a durable PVC edge 2 mm thick, which increases their impact resistance and mechanical strength.
The cabinet legs are adjustable in height within two centimeters, allowing you to place the cabinet even on a fairly uneven floor.
And what are the other options?
In the line of NV-1200 cabinets there is a cabinet with plumbing and a surface made of granite tiles, as well as cabinets without plumbing, and with a surface made of monolithic ceramics, stainless steel, chemically resistant plastic. They are exactly the same size as the NV-1200 SHV-M.
If you need a minimalistic cabinet of large sizes, you could be interesteed in the NV-1500 SHV-M model.
External dimensions of the cabinet (W×D×H): 1100×700×1960 mm.
Dimensions of the working area (W×D×H): 1068×540×750 mm.
Table top: laminated chipboard.
A minimalistic solution for your laboratory
The NV-1200 SHV-M fume cupboard has a minimum of functions, which makes it the most inexpensive.
The table top is made of laminated chipboard. It is relatively moisture-resistant, resistant to short-term exposure to acids, alkalis and organic solvents. This countertop does not tolerate strong heating or prolonged exposure to solvents, concentrated acids and alkalis.
The working area is closed by one lifting frame with a counterweight. It has two exhaust zones: the hood of the exhaust box and the level of the countertop. Diameter of the flange for connection to the ventilation system: 150 mm.
Working area size (W×D×H): 1068×540×750 mm. Please note that the cabinet narrows upwards. At a height of 50 cm, the depth of the working area will be 410 mm, and at a height of 70 cm: 365 mm. If you need to place high equipment, then make sure that it corresponds to the dimensions of the camera, otherwise you will not be able to close the cabinet.
The height of the raised glass above the cabinet: 510 mm, that is, with the glass raised, the total height of the cabinet will be 2470 mm.
The working area is illuminated by a fluorescent lamp (included in the package). The switch is located on the right side of the cabinet body.
The base of the cabinet is made on an all-welded metal frame in powder coating. The side laminated panels (chipboard 16 mm thick) are edged on the facade with a durable PVC edge 2 mm thick, which increases their impact resistance and mechanical strength.
The cabinet legs are adjustable in height within two centimeters, allowing you to place the cabinet even on a fairly uneven floor.
And what are the other options?
In the line of NV-1200 cabinets there is a cabinet with plumbing and a surface made of granite tiles, as well as cabinets without plumbing, and with a surface made of monolithic ceramics, stainless steel, chemically resistant plastic. They are exactly the same size as the NV-1200 SHV-M.
If you need a minimalistic cabinet of large sizes, you could be interesteed in the NV-1500 SHV-M model.
NV-1500 SHVD-U Two-frame fume cupboard with plumbing and countertop made of granite tiles
from
58 691 ₽
The Kors NV-1500 SHVD-U laboratory fume cupboard is a two—frame cabinet with a granite countertop with a width of 1410 mm and a small built-in sink made of polypropylene.
External dimensions of the cabinet (W×D×H): 1410×700×1960 mm.
Dimensions of the working area (W×D×H): 1378×540×750 mm.
Table top: granite tiles.
Working surface material: porcelain tile. It is moisture-resistant and perfectly withstands high temperatures. It is resistant to prolonged exposure to concentrated acids, alkalis and organic solvents. Limited resistance to hydrofluoric acid. This is one of the most popular types of countertops for laboratory furniture.
The small sink-drain is made of polypropylene, resistant to aggressive chemicals. Its diameter is 135 mm and its depth is 110 mm.
The working area is closed by two lifting frames with a counterweight. As standard, there are two exhaust zones: the hood of the exhaust box and the level of the countertop. Diameter of the flange for connection to the ventilation system: 150 mm.
Working area size (W×D×H): 1378×540×750 mm. Please note that the cabinet narrows upwards. At a height of 50 cm, the depth of the working area will be 410 mm, at a height of 70 cm: 365 mm. If you need to place high equipment, then make sure that it corresponds to the dimensions of the camera, otherwise you will not be able to close the cabinet.
The height of the raised glass above the cabinet: 510 mm, that is, when the glass is raised, the height of the cabinet will be 2470 mm.
The NV-1500 SHVD-U fume cupboard is equipped with an LED lamp with a switch and two sockets, one of them with grounding. Sockets have the IP20 degree of protection, the maximum load on them: 1.5 kW.
The working chamber is an all-welded metal frame in powder coating. Load-bearing laminated panels (chipboard with a thickness of 16 mm) are edged on the facade with a durable PVC edge with a thickness of 2 mm, which increases the impact resistance and mechanical strength of the products.
The cabinet legs are adjustable in height within two centimeters, allowing you to place the cabinet even on a rather uneven floor.
NV LAB
Moscow
Produced in: Moscow, Moscow region
Exhaust cabinet for washing dishes LAB-PRO SHVM 150.74.230 PP
BASIC EQUIPMENT
Working box
guide posts – aluminum profile painted with powder paint (RAL 7035/RAL 5023) in the right rack there is a light switch
front anti–spill side - acid-resistant polished stainless steel AISI 304
side panels – tempered glass
2 dependent lifting screens – tempered glass in aluminum frames, lifting 0-780mm, do not change the dimensions of the cabinet when lifting
the upper fixed screen – metal painted with powder paint (RAL 5023) with the texture of shagreen leather
back and top panels – polypropylene
on the top panel:
LED lamp dust- and moisture-proof 22W IP65
switching box with automatic emergency shutdown power supply 16A
flange d=250mm (the distance from the back panel to the center of the flange is 170mm)
easily removable exhaust canopies
3 exhaust levels (lower, side and front)
counterweights are placed in the front pylon racks and are easily serviced
Frame base
metal pedestal painted with powder paint (RAL 7035) with the texture of shagreen leather
facades – laminated MDF with a thickness of 16mm
handles – polypropylene
2 compartments with locks
1 shelf with the possibility of installation on three levels in any of the compartments (when the cabinet is equipped with 2 bowls, shelves are not included)
flange d=100mm
service panel – aluminum profile painted with powder paint (RAL 5023) with the texture of shagreen leather:
adjustable supports
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Exhaust cabinet LAB-M SHV ME 180.74.210 F20
Furniture for laboratory work.
All-metal exhaust cabinet
Working surface: FRIDURIT (20 mm)
Overall dimensions:
Length, mm: 1800
Depth, mm: 740
Height, mm: 2100
equipment
Working box
anti–spill side – acid–resistant polished stainless steel AISI 316
housing - metal painted with white powder paint (RAL 9016)
guide posts – aluminum profile painted with dark gray powder paint (RAL 7011)
2 dependent lifting screens - tempered glass in aluminum frames, lifting 0-710mm, not change the dimensions of the cabinet when lifting.
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Exhaust cabinet LAB-800 ballscrews
Working surface: Porcelain stoneware (ceramic tile 300*300mm)
Length, mm: 832
Depth, mm: 925
Height, mm: 2100
equipment
Working box
the side and back panels are lined with a row of ceramic tiles to a height of 400mm
the case is melamine with a thickness of 16mm
lifting screen with the possibility of fixing at any height – organic acrylic glass with a thickness of 8mm, lifting 0–750mm, increases the height of the cabinet with a full lift by 430mm
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Exhaust cabinet for organic synthesis LAB-PRO SHVOS 150.84.230 TR
BASIC EQUIPMENT
Working box
the front guide posts are aluminum profile painted with powder paint (RAL 7035/RAL 5023), in the right rack there are a light switch and 2 splash–proof sockets with a 3.2kW cover (IP54)
the front anti–spill side is acid-resistant polished stainless steel. AISI 304 steel
rear, upper, side panels – metal painted with powder paint (RAL 7035) with the texture of shagreen leather
the inner surfaces of the working box are lined with chemically resistant HPL plastic
2 dependent lifting screens – tempered glass in aluminum frames, lifting 0-780mm, do not change the dimensions of the cabinet when lifting
the upper fixed screen – tempered glass in an aluminum frame
on the upper panel:
LED dust- and moisture-proof lamp (2X10W IP65) is separated from the workspace by tempered glass thickness of 4mm
flange d=250mm (distance from the rear panel to flange center – 170mm)
easily removable exhaust canopies
3 exhaust levels
on the left side panel service module with cold water supply pipe and wall-mounted drain sink made of polypropylene
cold water supply valve in the left rack of the box
counterweights are placed in the front racks-pylons and are easily serviced
Frame base
collapsible frame made of rectangular metal profile painted with powder paint (RAL 7035) with the texture of shagreen leather
service panel - aluminum profile painted with powder paint (RAL 7035/RAL 5023) with the texture of shagreen leather
adjustable supports
module with two drawers
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Exhaust cabinet for working with acids LAB-PRO SHVK 150.84.230 VI
BASIC EQUIPMENT:
Working box
front guide posts – aluminum profile painted with powder paint (RAL 7035/RAL 5023), in the right rack there are a light switch and 2 splash–proof sockets with a 3.2kW cover (IP54)
the front anti-spill side is acid-resistant polished stainless steel. AISI 316 steel
rear, upper, side panels – metal painted with powder paint (RAL 7035) with the texture of shagreen leather
inner capsule made of polypropylene lined with ceramic plates of the rear and side panels to a height of 380mm
2 dependent lifting screens – tempered glass in aluminum frames, lifting 0-780mm, do not change the dimensions of the cabinet when lifting
the upper fixed screen – polypropylene
on the top panel:
LED dust– and moisture-proof lamp 2x22 W (IP65) is separated from the workspace by tempered glass with a thickness of 4mm
flange d=250mm (distance from the back panel to the center of the flange - 170mm)
switching box with automatic emergency power off 16A
3 exhaust levels
easily removable exhaust visors
counterweights are placed in the front pylon racks and are easily serviced
Frame base
collapsible frame made of rectangular metal profile painted with powder paint (RAL 7035) with the texture of shagreen leather
service panel - aluminum profile painted with powder paint (RAL 5023) with the texture of shagreen leather
adjustable supports
LOIP
Saint Petersburg
Produced in: Saint Petersburg
FUME HOOD FOR MUFFLE FURNACES
from
72 550 ₽
The SHVM fume hood is designed for the installation of muffle furnaces and drying cabinets. It can be equipped with cabinets made of steel.
1. LC-900 SHVM
Width - 960
GRANTEC - 72 550 ₽
2. LC-900 SHVM with protective screen
Width - 960
GRANTEC - 88 910 ₽
3. LC-1200 SHVM
Width - 1260
GRANTEC - 83 860 ₽
4. LC-1200 SHVM with protective screen
Width - 1260
GRANTEC - 100 390 ₽
5. LC-1500 SHVM
Width - 1560
GRANTEC - 95 270 ₽
6. LC-1500 SHVM with protective screen
Width - 1560
GRANTEC - 107 690 ₽
SpetsBaltMebel
г. Санкт- Петербург
Produced in: Saint Petersburg
General purpose exhaust cabinet LAB-PRO SHV 120.74.230 SS
BASIC EQUIPMENT
Working box
guide racks – aluminum profile painted with powder paint (RAL 7035/RAL 5023)in the right rack there are a light switch and 2 splash–proof sockets with a 3.2kW cover (IP54)
the front anti-spill side is acid-resistant polished stainless steel AISI 304
side panels – tempered glass
2 dependent lifting screens – tempered glass in aluminum frames, lifting 0-780mm, do not change the dimensions of the cabinet when lifting
the upper fixed screen – metal painted with powder paint (RAL 5023) with the texture of shagreen leather
on the top panel:
LED lamp dust- and moisture-proof (10W IP65)
switching box with automatic emergency power off 16A
flange d=250mm (the distance from the back panel to the center of the flange is 170mm)
easily removable exhaust canopies
3 levels of exhaust (lower, side and front)
counterweights are placed in the front pylon racks and are easily serviced
by the rear and upper panels – polypropylene
Frame base
collapsible frame made of rectangular metal profile painted with powder paint (RAL 7035) with the texture of shagreen leather
service panel - metal box painted with powder paint (RAL 5023) with the texture of shagreen leather:
adjustable supports
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Exhaust cabinet LAB-1500 SHV-N
Working surface: Porcelain stoneware (ceramic tile 300*300mm)
Length, mm: 1538
Depth, mm: 726
Height, mm: 2100
equipment
Working box
front anti–spill side - TRESPA TopLab
sink-drain (polypropylene, internal size 250*100*150mm), pipe for water
the package includes
a corrugated siphon
2 flexible eyeliners with a length of 1200mm
housing – melamine with a thickness of 16mm
lifting screen with the possibility of fixing at any height – tempered glass with a thickness of 5mm, lifting 0-700mm, increase the height of the cabinet at full lifting by 450mm
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Exhaust cabinet floor metal LAB-PRO SHVN-ME 150.96.255
BASIC EQUIPMENT
guide racks – aluminum profile painted with powder paint (RAL 7035/ RAL 5023) in the right rack there are a light switch and 3 splash-proof sockets with a 3.2kW cover (IP54)
in the left rack there are a water valve and a nitrogen
valve, rear, upper, side panels - metal painted with powder paint (RAL 7035)
with the texture of shagreen leather
bottom – corrugated aluminum sheet 3mm
3 dependent lifting screens – tempered glass in aluminum profile frames, lifting 0-1800mm, do not change the dimensions of the cabinet when lifting, the middle and upper screens are equipped with sliding glass doors made of tempered glass with a thickness of 4mm
upper fixed screen – metal, powder-painted paint (RAL 7035) with the texture of shagreen leather in the upper part and tempered glass in the lower part in an aluminum profile frame
on the upper panel:
LED lamp dust– and moisture-proof (2x22 W IP65)
flange d=250mm (distance from the back panel to the center of the flange - 155mm)
switching box with automatic emergency power off 16A
3 extraction levels
technological opening d =50mm with a plug and outlet at the bottom of the right sidewall and right rear rack
counterweights are placed in the front pylon racks and are easily serviced
on the left side panel service module with cold water and nitrogen supply pipes on the service panel there is a wall-mounted drain sink made of polypropylene.
(ext. size 250*100*150mm)
pipe d/water
pipe d/nitrogen
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Exhaust cabinet LAB-900 SHV-N
Working surface: Porcelain stoneware (ceramic tile 300*300mm)
Length, mm: 938
Depth, mm: 726
Height, mm: 2100
equipment
Working box
front anti–spill side - TRESPA TopLab
sink-drain (polypropylene, internal size 250*100*150mm), pipe for water
the package includes
a corrugated siphon
2 flexible eyeliners with a length of 1200mm
housing – melamine with a thickness of 16mm
lifting screen with the possibility of fixing at any height – tempered glass with a thickness of 5mm, lifting 0-700mm, increase the height of the cabinet at full lifting by 450mm
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Exhaust cabinet for organic synthesis LAB-PRO SHVOS 120.84.230 TR
BASIC EQUIPMENT
Working box
the front guide posts are aluminum profile painted with powder paint (RAL 7035/RAL 5023), in the right rack there are a light switch and 2 splash–proof sockets with a 3.2kW cover (IP54)
the front anti-spill side is acid-resistant polished stainless steel. AISI 304 steel
rear, upper, side panels – metal painted with powder paint (RAL 7035) with the texture of shagreen leather
the inner surfaces of the working box are lined with chemically resistant HPL plastic
2 dependent lifting screens – tempered glass in aluminum frames, lifting 0-780mm, do not change the dimensions of the cabinet when lifting
the upper fixed screen – tempered glass in an aluminum frame
on the top panel:
LED dust- and moisture-proof lamp (2X10W IP65) is separated from the workspace by tempered glass thickness of 4mm
flange d=250mm (distance from the back panel to flange center – 170mm)
easily removable exhaust canopies
3 exhaust levels
on the left side panel service module with cold water supply pipe and wall-mounted drain sink made of polypropylene
cold water supply valve in the left rack of the box
counterweights are placed in the front racks-pylons and are easily serviced
Frame base
collapsible frame made of rectangular metal profile painted with powder paint (RAL 7035) with the texture of shagreen leather
service panel - aluminum profile painted with powder paint (RAL 7035/RAL 5023) with the texture of shagreen leather
adjustable supports
module with two drawers
LOIP
Saint Petersburg
Produced in: Saint Petersburg
General purpose exhaust cabinet LAB-PRO SHV 90.74.230 KG
BASIC EQUIPMENT
Working box
guide racks – aluminum profile painted with powder paint (RAL 7035/RAL 5023)in the right rack there are a light switch and 2 splash-proof sockets with a 3.2kW cover (IP54)
the front anti–spill side is acid-resistant polished stainless steel AISI 304
side panels – tempered glass
2 dependent lifting screens – tempered glass in aluminum frames, lifting 0-780mm, do not change the dimensions of the cabinet when lifting
the upper fixed screen – metal painted with powder paint (RAL 5023) with the texture of shagreen leather
back and top panels –
polypropylene LED lamp dust- and moisture-proof (10W IP65)
switching box with automatic emergency power off 16A
flange d=250mm (the distance from the back panel to the center of the flange is 170mm)
easily removable exhaust visors
3 exhaust levels (lower, side and front)
counterweights are placed in the front pylon racks and are easily serviced
The frame base
is a collapsible frame made of a rectangular metal profile painted with powder paint (RAL 7035) with the texture of shagreen leather
service panel is a metal box painted with powder paint (RAL 5023) with the texture of shagreen leather:
adjustable supports.
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Exhaust cabinet LAB-M SHV 120.74.210 TR
Furniture for laboratory work.
Exhaust cabinet made of chipboard
Working surface: Trespa TopLab 6mm, on a substrate of wood-containing material (plywood 15mm, melamine 16mm).
Overall dimensions:
Length, mm: 1200
Depth, mm: 740
Height, mm: 2100
equipment
Working box
front anti–spill side - acid–resistant polished stainless steel AISI 316
housing - white chipboard with a thickness of 16mm
guide posts – aluminum profile painted with powder paint dark gray (RAL 7011)
2 dependent lifting screens – tempered glass in aluminum frames, lifting 0-710mm, do not change the dimensions of the cabinet when lifting.
LOIP
Saint Petersburg
Produced in: Saint Petersburg
NV-1500 SHV-PB Fume cupboard with table top made of polypropylene
from
60 312 ₽
The Korsa NV-1500 SHV-PB laboratory fume cupboard is a single—frame cabinet with a width of 1410 mm with a table top made of polypropylene.
External dimensions of the cabinet (W×D×H): 1410×700×1960 mm.
Dimensions of the working area (W×D×H): 1378×540×750 mm.
Table top: polypropylene.
A reliable fume cupboard for laboratories
Working surface material: monolithic polypropylene. It is moisture-resistant, resistant to prolonged exposure to concentrated acids, alkalis and organic solvents. Poorly resistant to high temperatures. Polypropylene countertops are suitable for chemical laboratories that work a lot with concentrated inorganic acids and alkalis.
The working area is closed by a single lifting frame with a counterweight. It has two exhaust zones: the hood of the exhaust box and the level of the countertop. Diameter of the flange for connection to the ventilation system: 150 mm.
Working area size (W×D×H): 1378×540×750 mm. Please note that the cabinet narrows upwards. At a height of 50 cm, the depth of the working area will be 410 mm, at a height of 70 cm: 365 mm. If you need to place high equipment, then make sure that it corresponds to the dimensions of the camera, otherwise you will not be able to close the cabinet.
The height of the raised glass above the cabinet: 510 mm, that is, with the glass raised, the total height of the cabinet will be 2470 mm.
The working area is illuminated by an LED lamp (included in the package). The switch is located on the right-hand side of the cabinet, next to the sockets.
The fume cupboard is equipped with two sockets, one of them with grounding. Sockets have the IP20 degree of protection, maximum load: 1.5 kW.
The base of the cabinet is an all-welded metal frame in powder coating. The side laminated panels (chipboard 16 mm thick) are edged on the facade with a durable PVC edge 2 mm thick, which increases their impact resistance and mechanical strength.
The cabinet legs are adjustable in height within two centimeters, allowing you to place the cabinet even on a rather uneven floor.
NV LAB
Moscow
Produced in: Moscow, Moscow region
METAL FUME HOOD MODELS: LK-900 SHV-MET, LK-1200 SHV-MET, LK-1500 SHV-MET, LK-1800 SHV-MET
from
109 420 ₽
It is not recommended for use when working with concentrated inorganic acids, especially in cases related to their evaporation. It is also not advisable to store acids and alkalis in cabinets and drawers, even in closed containers and with a running ventilation system.
1. LC-900 SHV-METH
Width - 960
GRANTEC - 109 420 ₽
LAB HPL- 116 350 ₽
POLYPROPYLENE- 113 290 ₽
2.LC-1200 SHV-MET Width - 1260
GRANTEC - 124 660 ₽
LAB HPL- 133 750 ₽
POLYPROPYLENE-129 180 ₽
3.LC-1500 SHV-METH
Width - 1560
GRANTEC - 142 370 ₽
LAB HPL- 151 940 ₽
POLYPROPYLENE- 148 720 ₽
4.LC-1800 SHV-MET Width - 1860
GRANTEC - 158 640 ₽
202 970 ₽LAB HPL- 168 190 ₽
POLYPROPYLENE- 165 510 ₽
SpetsBaltMebel
г. Санкт- Петербург
Produced in: Saint Petersburg
Exhaust cabinet with integrated glass-ceramic hob LAB-PRO SHVVP 180.84.230 VI
BASIC EQUIPMENT
Working box
front guide posts – aluminum profile painted with powder paint (RAL 7035/RAL 5023), in the right rack there are a light switch and 2 splash–proof sockets with a 3.2kW cover (IP54)
the front anti-spill side is acid-resistant polished stainless steel. steel (AISI 316)
rear, upper, side panels – metal painted with powder paint (RAL 7035) with the texture of shagreen leather
inner capsule made of polypropylene lined with ceramic plates of the rear and side panels to a height of 380mm
2 dependent lifting screens – tempered glass in aluminum frames, lifting 0-780mm, do not change the dimensions of the cabinet when lifting
the upper fixed screen – polypropylene
on the upper panel:
LED dust– and moisture-proof lamp 2x22 W (IP65) is separated from the workspace by tempered glass with a thickness of 4mm
flange d=250mm (distance from the back panel to the center of the flange - 170mm)
switching box with automatic emergency power off 16A
3 exhaust levels
easily removable exhaust canopies
the glass ceramic heating platform is located on the left side of the countertop
size 640*500mm (working area 580*430mm, 2 independent heating zones)
power up to 5.7kW
heating up
to 400 ° C counterweights are placed in the front pylon racks and are easily serviced
Frame base
collapsible frame made of rectangular metal profile painted with powder paint (RAL 7035) with the texture of shagreen leather
service panel - aluminum profile painted with powder paint (RAL 5023) with the texture of shagreen leather
adjustable supports
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Muffle furnace MIMP-17M
The furnace can be used as a universal laboratory muffle furnace in metallurgical, jewelry and ceramic production, in orthopedic dentistry, chemical and food laboratories.
Technical specifications
The furnace operates at ambient temperatures from 10 to 35 ° C
and relative humidity up to 80% at 25 ° C.
The designation of the furnace when ordering: muffle furnace MIMP-17M, where 17 indicates the volume of the working chamber of the furnace in liters.
Power consumption - 5000 watts
Dimensions of the working chamber W×D×B – 305×300×185 mm
Dimensions W×D×B – 570×580×550 mm
Weight – 60 kg
MIUS
Tula
Produced in: Tula
EXHAUST HOOD MODELS: LC-600 ZVN, LC-600 ZVP, LC-900 ZVN, LC-900 ZVP
from
12 570 ₽
Designed for local removal of polluted air – for example, from atomic absorption spectrometers installed on laboratory tables. There are two models – for mounting to the wall and for mounting to ceiling structures.
1. LC-600 ZVN
Width - 600
STEEL - 12 570 ₽
2. LC-600 ZVP
Width - 600
STEEL - 13 550 ₽
3. LC-900 ZVN
Width - 1260
STEEL - 14,820 ₽
4. LC-900 ZVP
Width - 1260
STEEL - 16,830 ₽
SpetsBaltMebel
г. Санкт- Петербург
Produced in: Saint Petersburg
Vacuum compression furnace SNVS-4,5.5,5/3-I2PD
Vacuum compression furnace SNVS-4,5.5,5/3-I2PD is designed for drying, degassing in vacuum and under pressure at temperatures up to 300 0C.
Tula-Term
Tula
Produced in: Tula
Metal tripod Sh-20/18, pack.15 pcs, MiniMedProm
from
336 ₽
The tripod is made of aluminum, which allows them to be sterilized at any temperature; this material provides lightness and durability. It can be used in water baths. The tripod has an individual packaging. Designed for storing test tubes.
MiniMed
Suponevo
Produced in: Bryansk region
Industrial Drying Cabinet SNOL (SHS) 4000/3-I2 V
Industrial drying cabinet SNOL (SHS) 4000/3-I2 V is designed for drying, tempering, aging, thermal testing and other types of heat treatment of various materials in an air environment at temperatures up to 350 (optionally up to 500) ° C with forced air convection in stationary conditions.
Tula-Term
Tula
Produced in: Tula
Water bath for six persons LOIP LB-162
Temperature range, °C (Current +5) ... +105
Accuracy of temperature maintenance, °C ± 1
Temperature setting error, °C ± 1
Power consumption from AC 220 V, no more,
1600 W
Number of jobs, pcs 6
The diameter of the workplace, mm 110
Volume of working fluid, l 24
Useful part of the bath / depth, mm 428x300 / 140
Overall dimensions, mm 530x330x220
Weight of the device without liquid is not more than kg 9
LOIP
Saint Petersburg
Produced in: Saint Petersburg
HF-400-4 POZIS Pharmaceutical refrigerator
from
45 352 ₽
Total volume, l.
400
Number of compressors, pcs.
1
Height, mm
1950
Depth, mm
610
Width, mm
600
Weight, kg., no more
74
Rated power consumption, W
250
Maximum rated power,
250 W
Voltage,
220 V
Warranty, years
2
Final report on pre-qualification for compliance with the requirements of Good Practice of the EAEU Distribution: yes
Additional transparent doors that prevent unwanted air exchange between compartments.
Cold storage
Auto refrigerator defrosting system
Temperature in the refrigerator, °C
+2... +15
Accuracy of temperature maintenance
±2°C
Thermal card: yes
Efficiency and energy consumption
Electricity consumption, kWh/day, no more
than 1.39
Climate class
UHL 4.2 (i.e. for moderate and cold climate)
Frequency, Hz
50
Approximate dimensions of the product with packaging
Net weight of the product, kg
74
Gross weight of the product, kg
78.5
Volume of packaging, m3
0.827
The length of the package, m
0.65
The width of the package, m
0.63
Height of the package, m
2.02
POZIS
Зеленодольск
Produced in: Tatarstan, Zelenodolsk
Muffle furnace MIMP-10M
The furnace can be used as a universal laboratory muffle furnace in metallurgical, jewelry and ceramic production, in orthopedic dentistry, chemical and food laboratories.
Technical specifications
The furnace operates at ambient temperatures from 10 to 35 ° C
and relative humidity up to 80% at 25 ° C.
The designation of the furnace when ordering: muffle furnace MIMP-10M, where 10 indicates the volume of the working chamber of the furnace in liters.
Power consumption - 4500 W
Dimensions of the working chamber W×D×B – 205×290×185 mm
Dimensions W×D×B – 460×580×550 mm
Weight – 52 kg
MIUS
Tula
Produced in: Tula
Vacuum chemical-resistant membrane pump PL.HM03.01.45 Primelab
from
90 000 ₽
The chemical-resistant diaphragm pump PL.HM03.01.45 is designed for a wide range of industrial and laboratory tasks, mainly related to pumping vapors/gases. The pumping speed is 38 l/min with a maximum residual pressure of 45 mbar.
The device has fairly compact dimensions. Operates from a standard 220 V power supply. Does not require special preparation before use.
Post-warranty and warranty service is available throughout the Russian Federation.
Characteristics
Valve(s) material
Standard: chloroprene copolymer NO-68-1 (TU 38 0051166-98)
A country
Russia
Power, W
180
Overall dimensions, L×W×H, mm
289x140x200
Protection class acc. to DIN EN60529
IP20
Noise level, dB
no more than 75
Nutrition
220 V/50 Hz
Ultimate vacuum, mbar abs.
45
Excess pressure, bar.
maximum allowable 0.5
Productivity, l/min
38
Fitting, inch (mm)
External diameter, 9 mm.
Maximum current, A
1.2
Device weight, kg
7.6
Working chamber material
PTFE (polytetrafluoroethylene)
Equipment
Vacuum pump, cable, instructions, passport, packaging (vacuum regulator and spare parts are not included in the kit and must be ordered separately).
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Cryothermostat liquid FT-311-80
Technical specifications:
Operating temperature range, °C -80...+100
Accuracy of temperature maintenance, °C ± 0.1
The discreteness of the temperature display, ° C 0.1
Cooling capacity at 20°C,
W 510
Pump capacity in the discharge (suction) circuit, not less than, l/min 8
Volume of working fluid, l 11
Open part of the bath/depth, mm 175x135/200
Power supply, V/Hz 220/50
Power consumption, no more than 4.4 kW
Overall dimensions, mm 535x555x985
Weight without working fluid, kg 80
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Vacuum drying cabinet with automatic adjustment SNVS-40/5
for carrying out heat treatment according to pre-created programs. The presence of remote control and a number of software options allows you to use the product for long-term heat treatment modes.
Vacuum drying cabinets can be used for:
- gentle drying of thermo- and oxygen-sensitive substances, such as food, medicinal, cosmetic products;
- complete removal of residual moisture from heat-sensitive components with a complex shape, such as components of electronic equipment, jewelry, watches and other precision mechanics;
- removal of air when filling the molds with a compound, followed by solidification at a given temperature;
- removing air from the product and replacing it with another necessary gas medium;
- tempering, annealing or aging of metals with the appropriate processing temperature in a vacuum or protective environment;
- drying of products after washing in flammable solvents (special version);
- testing of devices under low pressure conditions under various temperature conditions.
Tula-Term
Tula
Produced in: Tula
Magnetic stirrer with heating for 2 liters PL-RH-atom
from
19 000 ₽
Characteristics
Maximum heating temperature of the working surface, °C
150
A country
Russia
Overall dimensions, L×W×H, mm
165.5x148x64
Protection class acc. to DIN EN60529
IP21
Color
orange
Mixing
150-2000 rpm
Number of mixing places
1
Maximum volume of mixed liquid, l
2
Working surface of the plate (platform)
fireproof glass (glass ceramics)
Slab working surface size, LxW, mm
120x120 mm
Accuracy of maintaining the plate temperature, %
1
Displayed temperature resolution, °C
0.1
External temperature sensor
PT1000
Power consumption, W
300
Device weight, kg
0.9
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
PLP-03 Programmable plate
Laboratory heating plate with two independent heating sections and with the possibility of programming heating modes. The heating platforms are made of duralumin. The size of the total heating surface: 440x284 mm. Heating temperature: 40-400 °C.
TOMANALIT
Tomsk
Produced in: Tomsk
MARK-404 Dissolved Oxygen Analyzer
Measurement of dissolved oxygen concentration (CRC) in aqueous media.
Continuous monitoring of the concentration of dissolved oxygen in the aeration tanks of treatment facilities, monitoring of the condition of water bodies, including fish-breeding open/closed pools.
Warranty of 48 months for deliveries by RFShest channels
Possibility of independent measurements at six points
Automatic thermal compensation Air oxygen calibration
Long-lasting sensor
The service life of the sensor is at least 10 years
The possibility of placing the display unit at a remote distance from the control points
Up to 1000 meters
Communication with external devices
Galvanically isolated 4-20 or 0-20 mA current output and RS-485 port
High contrast LED screen
VZOR
Nizhny Novgorod
Produced in: Nizhny Novgorod
Circulation thermostat LT-424b
The LOIP LT-424b modification device consists of an immersion thermostat-circulator LOIP LT-400 and a working bath with a lean-to hinged lid.
Technical specifications:
Temperature range:
without external cooling, °C
Current+10 ... +200
with tap water cooling °C
Tvods+5 ...+200
Accuracy of temperature maintenance, °C ± 0.01
The error of setting the set temperature, no more than, ° C ± 0.02
Heater power, W 2200
Pump:
max. flow rate, l/min 6...12
pressure, 0.4 bar
Bath volume, l 24
The working fluid is water, silicone oil.
Open part of the bath / depth, mm 360x296/200
Overall dimensions, mm 532x335x400
Weight, kg 15.8
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Metal tripod Sh-40/15 , pack of 5 pcs, MiniMedProm
from
588 ₽
The tripod is made of aluminum, which allows them to be sterilized at any temperature; this material provides lightness and durability. It can be used in water baths. The tripod has an individual packaging. Designed for storing test tubes.
MiniMed
Suponevo
Produced in: Bryansk region