SpetsBaltMebel

Suitable for comfortable seating at tables from 750 to 900 mm high. It is possible to replace the standard gas lift with a high one, which will allow changing the height adjustment range of the chair from 570 to 820 mm and using such a chair to work at tables above 900 mm. The permissible load on the product should not exceed 120 kg. Seat size - 455x440 mm, backrest - 410x370 mm.

Designed for analytical and laboratory scales. The table top is mounted on rubber supports that protect the precession mechanisms of the weighing equipment, smoothing the effect of vibrations and shocks. 1.LK-1200 S Width-1200 CHIPBOARD- 5,690 ₽ 2.LK-1500 S Width-1500 CHIPBOARD- 6 370 ₽

1. LK-400 TD-V Width - 400 CHIPBOARD- 7 430 ₽ Steel-11,960 ₽ 2. LK-450 TD-V Width - 450 CHIPBOARD- 7,780 ₽ Steel- 12,670 ₽ 3. LK-600 TD-V Width - 600 CHIPBOARD- 9 200 ₽ Steel- 15 680 ₽ 4. LK-750 TD-V Width - 750 CHIPBOARD- 10 230 ₽ Steel- 17,540 ₽ 5. LK-900 TD-V Width - 900 CHIPBOARD- 10 930 ₽ Steel- 19 220 ₽

1. LK-900 with a high-voltage fuse Width - 960 GRANTEC - 133 610 ₽ LAB HPL- 136 840 ₽ POLYPROPYLENE - 127 470 ₽ 2.LK-1200 with a high-voltage fuse Width - 1260 GRANTEC - 153 570 ₽ LAB HPL- 157 460 ₽ POLYPROPYLENE - 145 000 ₽ 3.LK-1500 with a high-voltage fuse Width - 1560 GRANTEC - 176 510 ₽ LAB HPL- 181 130 ₽ POLYPROPYLENE - 165 550 ₽ 4.LK-1800 with a high-voltage fuse Width - 1860 GRANTEC - 197 670 ₽ 202 970 ₽LAB HPL- 136 840 ₽ POLYPROPYLENE - 184 290 ₽

1. LK-1200 AD-BC Width-1200 CPL- 23 600 ₽ LAB HPL- 36 650 ₽ 2. LK-1500 AD-BC Width-1500 CPL- 28 130 ₽ LAB HPL- 43 190 ₽

The wall-mounted drying rack is designed for drying laboratory utensils. It is possible to use the rack in conditions of high humidity, as well as direct contact with water and other liquids. No part of the product is prone to corrosion. Drying rack Width- -600 POLYPROPYLENE-11,480 ₽

It is an open metal laboratory shelving system with a gray polymer coating. It is possible to choose the depth of the rack from several options - 300, 400, 500 and 600 mm. The basic configuration has 4 shelves, but if necessary, the number of shelves can be increased. The distributed load capacity of a shelf is up to 80 kg, the total load capacity of a shelving system is up to 400 kg. It is possible to connect shelving systems to each other in the section. 1. ST-12-3 Width - 1000 STEEL- 10,370 ₽ 2. ST-12-4 Width - 1000 STEEL-11,480 ₽ 3. ST-12-5 Width - 100 STEEL-12 610 ₽ 4. ST-12-6 Width-1000 STEEL-13,660 ₽

The SHVM fume hood is designed for the installation of muffle furnaces and drying cabinets. It can be equipped with cabinets made of steel. 1. LC-900 SHVM Width - 960 GRANTEC - 72 550 ₽ 2. LC-900 SHVM with protective screen Width - 960 GRANTEC - 88 910 ₽ 3. LC-1200 SHVM Width - 1260 GRANTEC - 83 860 ₽ 4. LC-1200 SHVM with protective screen Width - 1260 GRANTEC - 100 390 ₽ 5. LC-1500 SHVM Width - 1560 GRANTEC - 95 270 ₽ 6. LC-1500 SHVM with protective screen Width - 1560 GRANTEC - 107 690 ₽

Suitable for storing most chemical reagents. It is not intended for storing concentrated acids and alkalis. 1. LK-400 SHR Width - 400 CHIPBOARD- 15 600 ₽ STEEL- 28,910 ₽ 2. LK-600 SHR Width - 600 CHIPBOARD- 20 200 ₽ STEEL- 38 120 ₽ 3.LK-800 SHR Width - 800 CHIPBOARD- 23 530 ₽ STEEL-43 700 ₽

1. LK-400 SHP Width-400 Chipboard-14 250 ₽ Steel-27 630 ₽ 2. LK-600 SHP Width-600 Chipboard-18 080 ₽ Steel-36 890 ₽ 3.LK-800 SHP Width-800 Chipboard-20 110 ₽ Steel-42 650 ₽

1. LK-400 CHA-V Width - 400 CHIPBOARD- 10 700 ₽ Steel-20 420 ₽ 2. LK-450 CHA-V Width - 450 CHIPBOARD- 11 050 ₽ Steel- 20,490 ₽ 3. LK-600 TYA-V Width - 600 CHIPBOARD- 15 120 ₽ Steel- 24 290 ₽

Designed for local removal of polluted air – for example, from atomic absorption spectrometers installed on laboratory tables. There are two models – for mounting to the wall and for mounting to ceiling structures. 1. LC-600 ZVN Width - 600 STEEL - 12 570 ₽ 2. LC-600 ZVP Width - 600 STEEL - 13 550 ₽ 3. LC-900 ZVN Width - 1260 STEEL - 14,820 ₽ 4. LC-900 ZVP Width - 1260 STEEL - 16,830 ₽