Catalog
Back to search results
Digital oscilloscope S8-52
Back to search results
Digital oscilloscope S8-52
Designed to study and measure the parameters of electrical signals in the frequency band from 0 to 120 MHz.
Technical specifications:
Number of channels 2
120 MHz bandwidth
Sampling rate 250 MHz
Equivalent sampling rate of 10 GHz
Rise time of PH <= 2.9 ns
Input active resistance (1±0.02) Mom
Input capacitance <= 25 pF
120 MHz bandwidth
2 channels, external synchronization input
Vertical sensitivity 2 mV/div
Sampling rate up to 250 Mbps, in real time
Recording length up to 16K counts in each channel
Color LCD screen with LED backlight
Cursor and automatic measurements
USB and RS-232 interface
Technical specifications:
Number of channels 2
120 MHz bandwidth
Sampling rate 250 MHz
Equivalent sampling rate of 10 GHz
Rise time of PH <= 2.9 ns
Input active resistance (1±0.02) Mom
Input capacitance <= 25 pF
120 MHz bandwidth
2 channels, external synchronization input
Vertical sensitivity 2 mV/div
Sampling rate up to 250 Mbps, in real time
Recording length up to 16K counts in each channel
Color LCD screen with LED backlight
Cursor and automatic measurements
USB and RS-232 interface
Accessories for oscilloscopes C8
from 735 855 ₽
VNIIFTRI
Mendeleevo
Produced in: Moscow region, Mendeleevo
Oscilloscope S1-176
It is intended for the study of periodic electrical signals by visual observation and measurement of their amplitude and time parameters on the scale of the CRT screen in the frequency band 0-50 MHz, as well as for monitoring the parameters of two- and three-pole devices using a component tester.
Technical specifications:
Number of channels 2
Bandwidth 0 - 50 MHz
Deviation coefficients of 2 mV/div - 20 V/div (step1-2-5)
Installation error ± 3%, ± 4% with a 1:10 divider
Rise time of PH <= 7 nsec
Input impedance is 1 mOhm/25 pF, with a divider of 1:10 - 10 mOhm/23 pF
Harsh operating conditions (-10°C to +40°C)
Bandwidth 0 - 50 MHz
Two channels
Indication of deviation and sweep coefficients on LED matrices
Tenfold stretching of the sweep
Calibrator 0.6 V, 1 kHz (± 1%)
X-Y mode
Built-in Component Tester
Screen 80x100 mm
Weight 6,8 kg
MNIPI
Minsk
Produced in: Belarus, Minsk
Digital oscilloscope S8-47/1
Designed to study and measure the parameters of periodic electrical signals in the frequency band from 0 to 100 MHz and single signals in the frequency band up to 10 MHz.
Technical specifications:
Number of channels
Bandwidth of periodic signals
Sampling rate:
2-channel mode
1-channel mode
Rise time of PH
Input impedance
Range of deviation coefficients
Range of scan coefficients
Voltage measurement error
Time interval measurement error
Maximum input voltage
Scan Launch Modes
Synchronization
2
0 – 100 MHz
500 MHz
1 GHz
≤3.5 ns
(1±0.02) MOm, (18 ±3) pF
from 2 mV/div to 10 V/div (step 1-2-5)
from 2 ns/cases to 50 s/cases (step 1-2-5)
≤±3 %
≤±1,5 %
≤300 V
automatic, waiting, one-time
internal on the front/decline, signal strength, duration and condition; external; from the network.
MNIPI
Minsk
Produced in: Belarus, Minsk
Digital storage oscilloscope S8-205/2
from 954 216 ₽
VNIIFTRI
Mendeleevo
Produced in: Moscow region, Mendeleevo
Digital oscilloscopes S8-54
Designed to study and measure the parameters of electrical signals in the frequency band from 0 to 200 MHz.
Description:
200 MHz bandwidth
2 channels, external synchronization input
Vertical sensitivity 2 mV/div
Sampling rate up to 400 Mbps, in real time
Color LCD screen with LED backlight
Saving signals on external media in graphic and text form
Cursor measurements and 22 types of digital measurements
USB and Ethernet interface
Frequency meter function
Logger function.
MNIPI
Minsk
Produced in: Belarus, Minsk
Digital Storage Oscilloscopes S8-203/2
from 735 855 ₽
VNIIFTRI
Mendeleevo
Produced in: Moscow, Mendeleevo
Oscilloscope S1-167/2
Designed for the study of periodic electrical signals by visual observation and measurement of their amplitude and time parameters on the scale of the CRT screen in the frequency band 0 - 25 MHz with a built-in multimeter measuring voltage and DC power, the average square value of voltage and AC power, DC electrical resistance.
Technical specifications:
Vertical deviation
Number of channels 2
Bandwidth 0-25 MHz
Deviation coefficients 2 mV/div-10 V/div (step 1-2-5)
Installation error ± 3%
Rise time of PH <= 14 nsec
Input impedance 1 mOhm/23 pF, with divider 1:10-10 mOhm/12 pF
with open input <=110 V
with closed input <=110 V
with divider 1:10 <= 250 V
range U post. U AC: 1 mV–500 V
Error 0.1% (U post); 0.3% -1% (U perem. 40 Hz–100 kHz)
Range I post., I AC.: 1 mA–2 A
Error: 0.25% (I post.); 0.5% (I perem. 40 Hz–5 kHz)
R Range: 1 Ohm–1 mOhm
Error R: 0.2%
3.5-digit indicator
Automatic selection of limits.
MNIPI
Minsk
Produced in: Belarus, Minsk
Digital oscilloscope S8-56
The oscilloscope is capable of operating both autonomously and as part of automated measuring systems with interfaces such as USB, RS-232, ETHERNET, IE-488 (CPC).
Technical specifications
Number of channels 2
The input impedance of the channels is 50 ohms and 1 mOhm
Channel bandwidth at an input impedance of 50 ohms from 0 to 350 MHz
Channel bandwidth at an input impedance of 1 mOhm from 0 to 200 MHz
Sampling rate 1600 MHz
The ADC bit rate is 9 BITS
Deviation coefficients from 1 mV/div to 50 V/div
Scan coefficients from 1 ns/div to 10 s/div
Startup modes automatic, standby, single
Synchronization internal and external
The basic error of measuring the amplitude is ± 3%
The basic error of measuring time intervals is ± (0.3 – 20)%
Operating temperature range from 5 to 40 °C
AC power supply 220 V, 50 Hz
Power consumption, no more than 75 VA
Overall dimensions, mm 420x213x181
Weight, not more than 7 kg
TEKHNOYAKS
Moscow
Produced in: Moscow
Oscilloscope S1-167/1
Designed for the study of periodic electrical signals by visual observation and measurement of their amplitude and time parameters on the scale of the CRT screen in the frequency band 0 - 25 MHz with a built-in multimeter measuring voltage and DC power, the average square value of voltage and AC power, DC electrical resistance.
Technical specifications:
range U post. U AC: 1 mV–500 V
Error 0.1% (U post); 0.3% -1% (U perem. 40 Hz–100 kHz)
Range I post., I AC.: 1 mA–2 A
Error: 0.25% (I post.); 0.5% (I perem. 40 Hz–5 kHz)
R Range: 1 Ohm–1 mOhm
Error R: 0.2%
3.5-digit indicator
Automatic selection of limits.
MNIPI
Minsk
Produced in: Belarus, Minsk
Digital oscilloscope C8-39
It is designed to study periodic signals in the frequency band 0-50 MHz and single electrical signals by registering them in digital memory with a sampling frequency of up to 50 MHz, observing their shape on a liquid crystal display (LCD), measuring the amplitude and time parameters of the signal under study.
Technical specifications:
Vertical deviation :2
Number of channels 0-50 MHz
Rise time of PH ≤ 7.0 ns
Input impedance 1 ± 0.03 mOhm, 25 pF
Deviation coefficients of 5 mV/div - 2 V/div (step 1-2-5)
The maximum input voltage is 100 V
With a divider of 1:10 250 V
The error of amplitude measurements is a≤ 2 %
5 mV...2 V; 10 ns...2 s/del.
ADC: 2 channels, 50 MHz, 8 bits
Equivalent sampling rate of 2.5 GHz
Marker measurements U: ±2.5%, T: ±1.5%
Pre-launch 8 screens,
post-launch 150 screens
Simultaneous observation of 2 signals
Cursor measurements DU and DT
Averaging modes and automatic DU and DT measurements
LCD screen - 320x240 dots (monochrome)
RS 232C interface
Dimensions, weight 176x280x80 mm, 3 kg
Power supply: +12V, 230B
MNIPI
Minsk
Produced in: Belarus, Minsk
Digital oscilloscope C8-43
It is designed to study periodic signals in the frequency band 0-50 MHz and single electrical signals by registering them in digital memory with a sampling frequency of up to 50 MHz, observing their shape on a liquid crystal display (LCD), measuring the amplitude and time parameters of the signal under study.
Description:
2 mV...10 V/div; 10 ns...100 s/del
ADC: 2 channels, 100 MHz, 8 bits, 64 KB/channel
Equivalent sampling rate of 10 GHz
Marker measurements U: ±2.5%,T: ±1.5%
Pre-start, averaging,filtering
Familiar management interface
High-quality, "live" image
Additional modes in the "MENU"
Low price
Screen 80x100 mm (CRT made in Holland)
Dimensions, weight: 120x300x380 mm, 7 kg
Power supply: ~220V, 80 VA
MNIPI
Minsk
Produced in: Belarus, Minsk
Three-coordinate magnetic antenna AMT-1
NNPO im. M.V.Frunze
Nizhny Novgorod
Produced in: Nizhny Novgorod
Automated complex of metrological maintenance of radio measuring and electrical measuring equipment
NNPO im. M.V.Frunze
Nizhny Novgorod
Produced in: Nizhny Novgorod
Megaohmmeter E6-23
Designed to measure the insulation resistance of electrical circuits that are not under voltage, in the range from 10 kOhm to 100 Gom.
Technical specifications:
Ranges: 10kOhm–100gohm
Measurement error: ±(1.5–2.5)%
Test voltage: 2500 V
3 digit digital indicator
Built-in battery
Dimensions, weight: 150x170x200 mm, 4 kg
Power supply: ~110, ~220, 15 VA, 12V battery
Operating temperature: -20 °C – +50 °C
MNIPI
Minsk
Produced in: Belarus, Minsk
A specialized measuring instrument based on the RIAP-1.8 receiver for monitoring RF radiation
NNPO im. M.V.Frunze
Nizhny Novgorod
Produced in: Nizhny Novgorod
Universal calibrator H4-301
Technical specifications:
Voltage reproduction range Uk 200 mV 0.07 + 0.01
DC: from 50 MV to 600 V, Uk 2 V 0.05 + 0.005
sub-bands (Uk) 200 mV; 2; 20; 200; 600 V Uk 20 V 0.05 + 0.005
Basic error, ± (% of U + % of Uk): Uk 200 V 0.07 + 0.01
Uk 600 V 0.1 + 0.02
Voltage reproduction range UK 200 mV 0.2 + 0.05
AC: from 1 mV to 600 V, Uk 2; 20 V 0.15 + 0.02
sub-bands (Uk) 200 mV; 2; 20; 200; 600 V from 20 Hz to 20 kHz
Basic error, ± (% of U + % of Uk): sv. 20 to 40 kHz 0.2 + 0.1
Uk 200 V; 600 V:
from 40 Hz to 1 kHz 0.2 + 0.05
Power reproduction range Ik 200 Ma 0.1 + 0.02
DC: from 1 Ma to 5 A, Ik 2; 20; 200 mA 0.1 + 0.01
sub-bands (Ik) 200 Ma; 2; 20; 200 mA; 2; 5 A Ik 2 A; 5 A 0.1 + 0.02
Basic error, ± (% of I + % of Ic):
AC power reproduction range: from 10 Ma to 5 A
sub-bands (Ic) 200 Ma; 2; 20; 200 mA; 2; 5 A 0.15 + 0.05
Frequency range from 20 Hz to 1 kHz
Basic error, ± (% of I + % of Ic):
USB interface
Operating temperature range from minus 10 °C to + 50 °C
Dimensions; weight 420×342×184.5 mm; 10 kg
MNIPI
Minsk
Produced in: Belarus, Minsk
Universal calibrator H4-201
Technical specifications:
reproduction of DC voltage from 50 mv to 1000 V
- ranges of 200 mV; 2; 20; 200; 1000 V
- error 0.01 – 0.023 %
reproduction
of the sinusoidal AC voltage from 0.3 mV to 750 V
- ranges of 200 mV; 2; 20; 200; 750 V
- error 0.15 – 0.225 %
- frequency range 20 Hz - 100 kHz (20 Hz - 5 kHz on the range. 200 V; 20 Hz - 2.5 kHz on the range. 750 V)
reproduction of DC power from 0.03 µA to 50 A
- ranges of 200 Ma; 2; 20; 200 mA; 2; 50 A
- error 0.012 – 0.022 %
reproduction of AC power
of sinusoidal shape from 3 µA to 50 A
- ranges of 200 Ma; 2; 20; 200 mA; 2; 50 A
- error 0.062 – 0.23 %
- frequency range 20 - 5000 Hz (45 - 1000 Hz on the range. 50 A)
RS-232C interfaces; USB
operating temperature range from + 5 to +40oC
dimensions 184.5x465x540.5 mm
weight 20 kg
power supply ~ 230 V
MNIPI
Minsk
Produced in: Belarus, Minsk
Universal calibrator H4-301/1
Technical specifications:
Voltage reproduction range Uk 200 mV 0.07 + 0.01
DC: from 50 MV to 600 V, Uk 2 V 0.05 + 0.005
sub-bands (UK) 200 MV; 2; 20; 200; 600 V Uk 20 V 0.05 + 0.005
Basic error, ± (% of U + % of Uk): Uk 200 V 0.07 + 0.01
Uk 600 V 0.1 + 0.02
Voltage reproduction range Uk 200 mV 0.2 + 0.05
AC: from 1 mV to 600 V, sv. 20 to 40 kHz 0.2 + 0.1
sub-bands (Uk) 200 mV; 2; 20; 200; 600 V Uk 2; 20 V 0.15 + 0.02
Basic error, ± (% of U + % of Uk): from 20 Hz to 20 kHz 0.15 + 0.02
Uk 200 V; 600 V: 0.2 + 0.05
from 40 Hz to 1 kHz 0.2 + 0.05
DC power reproduction range: from 1 Ma to 200 mA,
sub-bands (Ic) 200 Ma; 2; 20; 200 mA Ic 200 Ma 0.1 + 0.02
Basic error, ± (% of I + % of Ic): Ic 2; 20; 200mA 0.1 + 0.01
Power reproduction range
AC: from 10 Ma to 200 mA,
sub-ranges (Ic) 200 Ma; 2; 20; 200 mA 0.15 + 0.05
Frequency range from 20 Hz to 1 k Hz
Basic error, ± (% of I + % of Ic):
USB interface
Operating temperature range from minus 10 to +50 C
Dimensions; weight 428×327×235× mm; 10 kg
MNIPI
Minsk
Produced in: Belarus, Minsk
Frequency comparator CHK7-51
Mathematical processing of the measurement makes it possible to determine and display on the indicator board the relative systematic change in frequency, the average relative value of the frequency difference, the RMS relative frequency deviation, the RMS relative two-sample frequency deviation.
NNPO im. M.V.Frunze
Nizhny Novgorod
Produced in: Nizhny Novgorod
Antenna dipole P6-52
The antenna is passive.
It can be operated indoors and outdoors.
NNPO im. M.V.Frunze
Nizhny Novgorod
Produced in: Nizhny Novgorod
Voltmeter V7-82
Technical specifications:
DC voltage ,
Measuring range, 10 mv-1000V
Measurement error, ± 0.01%
AC voltage ,
Measuring range, 1 mV - 700 V
Measurement error, ± 0.4%
Frequency range, 20 Hz- 1 MHz
Direct current ,
Measuring range, 0.2 µA - 10 A
Measurement error, ± 0.15%
MNIPI
Minsk
Produced in: Belarus, Minsk