Volume from 1.0 to 3.0 liters;
case material – quartz glass, base and lid material – stainless steel AISI 304 (AISI 316);
autoclaving sterilization method;
direct-drive agitator, adjustable speed, special form for mixing viscous media, effective mechanical defoamer;
sampling specifically for taking samples with high viscosity;
original sensor sealing system, inputs are compatible with Mettler-Toledo sensors;
control of the fermentation process from the keyboard of a personal computer – control and maintenance of the basic parameters of fermentation, the introduction of an additional substrate (recharge) by various algorithms, in particular, by signals from the pO2 sensor, which can significantly reduce the consumption of substrates;
control and maintenance of pH, pO2, temperature;
easy assembly/disassembly, quick preparation for work in compliance with basic requirements and standards;
fermenters can be combined into complexes of 4 pcs.

Fermenters can be used in the pharmacological, microbiological industries, as well as in scientific research related to the cultivation of microorganisms.

Fermenter FA-10 from 5 to 10 l

Volume from 5.0 to 10.0 l; case material – quartz glass, base and lid material – stainless steel AISI 304 (AISI 316); autoclaving sterilization method; direct-drive agitator, adjustable speed, special form for mixing viscous media, effective mechanical defoamer; sampling specifically for taking samples with high viscosity; original sensor sealing system, inputs are compatible with Mettler-Toledo sensors; control of the fermentation process from the keyboard of a personal computer – control and maintenance of the basic parameters of fermentation, the introduction of an additional substrate (recharge) by various algorithms, in particular, by signals from the pO2 sensor, which significantly reduces the consumption of substrates; control and maintenance of pH, pO2, temperature; easy assembly/disassembly, quick preparation for work in compliance with basic requirements and standards; fermenters can be combined into complexes of 2 pcs. Fermenters can be used in the pharmacological, microbiological industries, as well as in scientific research related to the cultivation of microorganisms.

Prointekh

Pushchino

Produced in: Moscow region, Pushchino

Industrial fermenter from 5 to 1000 l

Volume from 5.0 to 1000.0 l; case material stainless steel AISI 304 (AISI 316); shirt material stainless steel AISI 304; elevator for lifting the lid; illuminated viewing glass; mechanical seal of the agitator shaft by Burgmann or equivalent; speed control; various options for strapping according to the Customer's TOR. Strapping elements of Burkert, Wika, Gemu firms; mechanical and chemical defoaming system; Keofitt sampling; it is possible to complete the steam generator, compressor and other technological systems. agitator with direct drive, adjustable speed, two-tier; control of the fermentation process from the keyboard of a personal computer – control and maintenance of the basic parameters of fermentation, the introduction of an additional substrate (recharge) by various algorithms, in particular, by signals from the pO2 sensor, which significantly reduces the consumption of substrates; control and maintenance of pH, pO2, temperature; easy assembly/disassembly, quick preparation for work in compliance with basic requirements and standards; fermenters with a volume of up to 20 liters can be combined into complexes of 2-4 pcs. Fermenters can be used in the pharmacological, microbiological industries, as well as in scientific research related to the cultivation of microorganisms.

Pushchino

Produced in: Moscow region, Pushchino

Pro-Lab 3-12-liter laboratory fermenter with two culture vessels by BioTechno

One control system continuously collects and analyzes data from multiple culture vessels. Thanks to this, you no longer need to spend time constantly monitoring and analyzing data in several parallel fermentations. The configuration below is an example. You can select the fermenter options you need in the Fermenter Configurator section. 3-12 l total volume; 2-10 l working volume; 0.5-3.0 l minimum volume; Temperature control is carried out by flowing the coolant (water) through the jacket of the culture vessel. The fermenter is equipped with a magnetic seal stirring motor from 100 rpm to 1000 rpm; Spin filter for perfusion processes; Fully customizable cover with standard ports; Fermenter Lid: The fermenter lid is equipped with versatile customizable ports; Made from electropolished 316L stainless steel; Lid ports: Port for inoculation; Port for deep aeration; Port for surface aeration; Condenser port; Temperature sensor port; Port for pH sensor; Port for connecting an O2/CO2 gas analyzer; Port for turbidity sensor; 3-pin port; Port for dip tube; Port for sampling; Fermenter components: Control module and software C-BIO for two vessels; Computer and cables; Heating module (vessel jacket); CO2 mass flow controller; Mass flow controller N2; High-speed fixed-speed peristaltic pump - 2 pcs; High-speed peristaltic pump with variable speed - 2 pcs; Temperature sensor; Turbidity sensor; Gas analyzer O2/CO2; pH sensor; Rushton stirrer; Microbubbler; Sterile sampling system; Condenser 15 l/min; Two 250 ml refill flasks with electropolished stainless steel holder.

Moscow

Produced in: Moscow

May be interested in

PYROLYZER

The pyrolytic gas chromatography method is widely used in the study of polymer materials, plastics, rubbers, rubbers, paints and other high-molecular compounds of natural and artificial origin. The method is based on thermal decomposition of sample samples in an inert medium (without oxygen access), followed by chromatographic separation and analysis of the formed volatile compounds. Thus, the resulting pyrogram allows us to judge the composition of the original sample. Pyrolysis is also used in geochemical studies. Technical specifications The volume of the capsule is 56 ml. Pyrolysis temperature — from 200 to 1000 °C. The error of maintaining the temperature is not more than 1.0 ° C. The heating time of the sample to the pyrolysis temperature is no more than 2 seconds. The cooling time of the capsule when moving from the hot zone to the cold zone after pyrolysis is no more than 10 seconds. The time of continuous operation in the pyrolysis mode is no more than 60 seconds. Electric power supply from the AC network with voltage (220index) V, frequency (50 ± 1) Hz. Power consumption — no more than 100 VA. Overall dimensions of the control unit (width ×depth×height) — 210×190×100 mm. Overall dimensions of the input node (width× depth×height) — 90×135×160 mm. The weight of the control unit is not more than 2.5 kg. The weight of the input node is not more than 0.9 kg.

Yoshkar-Ola

Produced in: Yoshkar-Ola, Mari El

Liquid analyzer "FLUORAT®-02-4M"

Technical specifications: Limit of detection of the control substance (phenol) in water, mg/dm3, not more than 0.005 Measurement range of the mass concentration of the control substance (phenol) in water, mg / dm3 from 0.01 to 25 Measurement range of the directional transmission coefficient, % from 5 to 100 Limits of permissible absolute error of measurements of the directional transmission coefficient, % ±2 Warm-up time, min, not more than 30 Continuous operation time, h, not less than 8 Overall dimensions, mm, no more than 305x320x110 Weight, kg, not more than 6.5 AC power supply: - AC power supply voltage, V - frequency, Hz (220 ±22) (50 ±1) Power consumption, V× A, no more than 36 Operating time for failure, h, no less than 2500

Saint Petersburg

Produced in: Saint Petersburg

Sterilizer for tools Ferroplast-X Premium

Yaroslavl

Produced in: Yaroslavl

Biosafety cabinet BA-Safe 90

Distinctive features of biological safety cabinet of ODO "BELAKVILON" four versions with different working area widths: 90, 120, 150, 180; ease of operation and ease of operation; highly efficient shadowless diffused panoramic illumination of increased brightness (at least 1500 lux) with brightness adjustment for comfortable operation; a stable air barrier and a constant downward flow in the work area ensures maximum protection of personnel and the sample. These conditions are constantly monitored by automation; the front screen is made of 6 mm tempered glass with 2 handles and a tilt angle of 10°, with 20 cm (available 16– 25 cm) working lifting height; the front working glass has no edge, which allows you to observe the working process without interference; availability of all spare parts in stock (including metal body panels and glass).

Minsk

Produced in: Belarus, Minsk

SPINNIX Centrifuge/Vortex, 2800 rpm, with a set of rotors

from 25 000 ₽

The Centrifuge/Vortex combines the functions of a vortex and a centrifuge in one device and is small in size, which saves space on the desktop or in the PCR box. Centrifuge characteristics:

Maximum rotation speed - 2800 rpm;
Maximum capacity - 12×1.5/2 ml (rotor R-1.5M);
vortex mode for one tube only;
timer - no;
covers - no;
operating mode - continuous and pulsed;
available rotors, pcs. - 3;
dimensions, W×D×H, mm – 120×170×120;
weight, kg - 1.4.

Zelenograd

Produced in: Zelenograd

Freeze dryer LS-500

• The frozen product is placed in the dryer in stainless steel trays, or in separate containers with a flat bottom up to 105 mm high (test tubes, ampoules, vials, vials, cones, Petri dishes, glass laboratory glasses, etc.). A low-temperature chamber must be provided for freezing the product. • Drying speed of at least 100 g/h. • Additional devices: - manifold with vacuum taps for drying from flasks; - centrifuge for drying in ampoules; - collector with taps for sealing ampoules in vacuum; - low temperature trap; • The temperature of the condenser is -50 °C (5 ° C), the capacity is 6 kg of ice. • The working pressure in the vacuum chamber of the dryer is 6.67 Pa (5•10-2 mmHg), a vacuum pump with a gas ballast device. • Adjustable shelf temperature from -15°C to +45°C. • Monitoring of vacuum parameters and temperature of the condenser and the product. • Continuous operation time of at least 30 hours. • The dryer is powered by a three-phase 380 V AC mains. The power consumption is 1.3 kW. • External dimensions: 590x660x820 mm, weight 120 kg.

Pushchino

Produced in: Moscow region, Pushchino

WATER PURIFICATION DEVICES: SPECTRUM DEIONIZER

The Spectrum deionizer makes it possible to obtain high–purity deionized water with a specific electrical conductivity of 0.06 - 0.1 mcm/cm and does not require connection to a municipal water supply line. Technical specifications The volume of water poured into the tank is 1.6 liters The specific electrical conductivity of the resulting water is 0.06 – 0.1 mcm/cm Water capacity of at least 6 liters/hour Filter life 700 liters

Yoshkar-Ola

Produced in: Yoshkar-Ola, Mari El

Automatic coagulometer AK-37

Ufa

Produced in: Ufa

Compact magnetic stirrer PL-R-atom USB, 2 liters. Primelab

The speed is set in the range from 150 to 2000 rpm, the timer is up to 99 minutes. Country of origin, Russia Orange color Protection class (according to DIN EN60529), IP21 Number of places for mixing, 1 Maximum volume of mixed liquid, 2 l Range of operating speeds of the motor shaft, 150-2000 rpm Connection – external temperature sensor PT1000 (sold separately) Power: USB port. Dimensions, weight Overall dimensions LxWxH, 160x148x48 mm Diameter of the working surface of the plate, 128 mm Device weight, 0.3 kg Contents of delivery Magnetic stirrer without heating PL-R-atom Operating manual combined with passport Anchor for stirrer in fluoroplastic sheath 5x30 mm; DC power supply, output voltage 9V, rated input voltage ~220V, 50Hz. USB cable

Mytishchi

Produced in: Mytishchi, Moscow region

Device for automatic isolation of nucleic acids COLIBRI

from 2 840 000 ₽

The open system allows you to work with reagents and laboratory plastics from various manufacturers Russian-language software Modifications: - COLIBRI 24 - the ability to select from 1 to 24 samples - COLIBRI 48 - the ability to select from 1 to 48 samples - COLIBRI 96 - the ability to select from 1 to 96 samples Range of working volumes: - COLIBRI 24 - 200 – 5000 mkl - COLIBRI 48 - 30 – 1000 mkl - COLIBRI 96 - 20 – 1000 mkl A unique format of consumable plastic - 8-hole strips and combs Two built-in thermostats The accuracy of temperature maintenance is ± 1 °C Heating/cooling - up to 100 °C / up to 35 °C Universal Thermostat Tube Unit Built-in computer Ready-made allocation protocols The time of one extraction cycle is from 11 minutes Built-in bactericidal UV lamp for interior treatment

Москва

Produced in: Moscow

ORB-2P POZIS Recirculator

from 20 948 ₽

Capacity, m3/h 100 Bactericidal efficiency, % 99.9 Total power of ultraviolet radiation of bactericidal lamps, W, not less 24 Service life of UV lamps, hours 9000 Power consumption, W, 95±15 Adjusted sound power level, no more than 40 dBA Bactericidal UV light lamp LUV 15W, with a power of 15W 5 pcs Dimensions (H*W*D), mm 1015x366x630 mm Weight, kg, no more 10.5 Warranty, years 2 Approximate dimensions of the product with packaging Net weight of the product, kg 10.5 Gross weight of the product, kg 11.1 Volume of packaging, m3 0,140 The length of the package, m 0.92 Width of the package, m 0,41 Height of the package, m 0,37

Зеленодольск

Produced in: Zelenodolsk, Tatarstan

OBN-04-"Ya-FP" UV-Bactericidal Three-Lamp Outdoor Mobile Irradiator

Yaroslavl

Produced in: Yaroslavl

Infrared analyzer "InfraLUM® FT-12" with a wake-up module

Technical specifications: Measurement time, sec. 80 Standard sample volume in a cuvette, 500 ml Spectral range, cm-1 from 8700 to 13200 Spectral resolution, cm-1, not more than 10 The limit of the permissible value of the absolute error of the wavenumber scale, cm-1 ± 0.5 The level of positive and negative pseudo-scattered light caused by the nonlinearity of the photodetector system (relative to the maximum signal), %, not more than ± 0.25 Analyzer warm-up time, min, no more than 30 Continuous operation time of the analyzer, h, not less than 8 Overall dimensions, mm, not more than 530x485x495 Weight, kg, not more than 32 Power supply of analyzers from the AC network: AC power supply voltage, V frequency, Hz (220 ±22) (50 ±1) Power consumption, V× A, not more than 110 Average time to failure, h, not less than 2500

Saint Petersburg

Produced in: Saint Petersburg

Mercury content indicator "SR-1"

Technical specifications: The minimum limit of operation is 3×10-4 mg/m3 (the average daily MPC of a residential premises in accordance with GN 2.1.6.1338-03 of May 21, 2003) The range of set thresholds is from 3×10-4 mg/m3 to 1×10-3 mg/m3 Measurement time, no more than 15 s Output signals ON, READY, DANGEROUS, FAULTY Electrical parameters of the output signal 0-24 V, 0.5 A Operating mode Monitoring Average full service life of 5 years Frequency of maintenance 1 time in 3 months RS-232 digital output Power supply 190-240 V, 50 Hz Power consumption, no more than 30 watts Overall dimensions, no more than 280x420x600 mm Weight, not more than 18 kg

Saint Petersburg

Produced in: Saint Petersburg

Humidity analyzer "ELVIZ-2S"

from 102 000 ₽

Krasnoobsk

Produced in: Novosibirsk region, Krasnoobsk

Biosafety cabinet BA-Safe 180

The Class II Type A2 biological safety cabinets are designed to reduce the risk of infection to the operator during work with dangerous or potentially dangerous microorganisms and to protect the specimen, is the result of the production of biological safety cabinets based on user feedback. Technical specifications Voltage, frequency, 230V ±10%/Hz Engine 1-phase 230 V, 50 Hz, speed 1150 rpm UV lamp TUV UV lamp, UV lamp timer, 6000 hours of operation Wavelength 254 nm Number of LEDs, pcs at least 380 Lighting power, 55 W Work area illumination at least 1500 lux, brightness adjustable, color of luminous flux 6000 K (cold white light) Internal dimension of the working area, at least 1830×504 mm Working height of front screen elevation, 200 mm Max. height of front screen elevation, 510 mm Frontal screen position alarm Audible position warning. Warning appears on display Outer dimension, mm 1968,5х766,2х1506,6 Height of base, mm 690

Minsk

Produced in: Belarus, Minsk

EQUILIBRIUM STEAM DISPENSER DRP-10(DRP-13)

The equilibrium steam dispenser "DRP-10 (DRP-13)" is designed for the introduction of volatile components from matrices into the chromatograph, the introduction of which into the chromatograph is impossible or undesirable. Examples of such matrices are natural, drinking and waste water, soil, biological fluids, food and beverages, various polymers, building materials, pharmaceutical products, etc. The use of DRP-10 (DRP-13) makes it possible to avoid contamination of the evaporator, column and chromatograph detector with non-volatile or non-volatile substances, to avoid the consumption of solvent required for extraction, to increase the reproducibility of analyses. Technical specifications The temperature of the thermostat of containers with a breakdown is from ambient temperature to 150 °C. The error of maintaining the temperature is not more than 0.1 ° C. The volume of the container with the sample is 20 ml, it is possible to use vials from 6 to 40 ml. The number of simultaneously thermostatically controlled containers is 4. The dosed volume of the equilibrium vapor is up to 2 ml. The temperature of the syringe is from ambient temperature to 150 °C. The gas consumption for purging is from 5 to 300 ml/min. Electric power supply from the AC network with voltage (220index) V, frequency (50 ± 1) Hz. Overall dimensions (width × depth × height) — 350×270×170 mm. Power consumption — no more than 360 VA. Weight — no more than 6.5 kg.

Yoshkar-Ola

Produced in: Yoshkar-Ola, Mari El