Catalog
Back to search results
Mobile Laboratory For The Control Of Physical Factors
Back to search results
Mobile Laboratory For The Control Of Physical Factors
The companies NTM-Zashchita LLC (Moscow) and Avtospectr-NN (Nizhny Novgorod) have implemented a joint project "Mobile Laboratory for Physical Factors Control", which is a mobile complex equipped with the most modern equipment of well-known Russian and foreign manufacturers, designed to effectively solve the problems of sanitary and hygienic control and labor protection, certification of workplaces and monitoring of the production environment.
Mobile Substation Laboratory TECHNOAS
The TECHNOAS substation laboratory consists of:
Test facility
• – Maximum rectified voltage up to 70 kV to 90 mA.
• – Maximum AC voltage of the industrial frequency of 50 Hz to 100 kV to 175 mA.
The IDP-10 dielectric loss meter unit is based on the Tangent-2000 meter and includes:
• – Power transformer parameter meter.
• – Measurement of losses and current XX.
• – Measurement of short circuit losses and voltage.
• – Determination of the transformation coefficient and the winding connection group.
• – Measurement of the resistance of the windings to direct current.
• – Formation of the test report.
A milliohmmeter
Measures DC resistance in inductive and non–inductive circuits in the range of 1 µΩ ÷ 10 kΩ at a current of 10A, as well as makes oscillograms of switching the contactor of a high-speed RPN device.
TEKHNO-AS
Kolomna
Produced in: Kolomna, Moscow region
Trace Searcher Success AG-309.20N
from
161 400 ₽
A trace searching kit for searching underground utilities (cable lines, metal pipelines, and other communications made of conductive materials).
The kit includes a receiver in the form of a monoblock with a large LCD display, which displays an image of the route and automatically calculates the depth of communication up to 10 m, as well as the current in the line, as well as a compact autonomous generator with an output power of up to 20 watts and a range of up to 3 km.
Connection to the desired route is possible both by contact and contactless method.
TEKHNO-AS
Kolomna
Produced in: Kolomna, Moscow region
Trace Searcher Success AG-408.10
from
160 770 ₽
A trace searching kit for finding underground utilities (cable lines, metal pipelines, and other communications made of conductive materials). Compact stand-alone generator with an output power of up to 20 watts and a range of up to 3 km. Connection to the desired route is possible both by contact and contactless method.
Multifunctional tracer receiver with arrow indicator and audio output to the operator's headphones.
Frost-resistant and lightweight housing. Leak detector/flaw detector function (using an optional acoustic sensor).
TEKHNO-AS
Kolomna
Produced in: Kolomna, Moscow region
Mobile laboratory for 0.4-10 kV cable lines (ETL-10)
Laboratory for 0.4-10 kV cable lines (ETL-10) consists of:
1. Test facility
• – Maximum rectified voltage up to 70 kV;
• – Maximum AC voltage of the industrial frequency of 50 Hz to 50 kV.
2. Burning facility
• – Maximum voltage up to 30 kV;
• – Maximum current up to 80 A;
• – Working hours are not limited;
• – Switching of stages is carried out without breaking the arc at the time of switching;
• – The ability to start working from any stage of burning (when working with low-voltage cables);
• – Built-in afterburning.
3. High voltage pulse generator
• – Output voltage 0...12 kV / 0...24 kV;
• – The pulse energy at each stage is 3000 J;
• – Built-in IDM for collaboration with the reflectometer.
4. Reflectometer
– Supports 3 methods of determining the location of damage:
• – By pulse reflectometry;
• – By the method of oscillatory discharge;
• – Pulse-arc method.
5. High-voltage cable defects detector
• – Determining the location and depth of the cable at a depth of up to 10 m;
• – Tracing at a distance of up to 10 km;
• – Search for live electrical cables;
• – Search for places where the pipeline and cable intersect;
• – Determining the places of damage to cable lines;
• – Site surveys before excavation;
• – Search for places of damage to the external insulation of the cable;
• – GPS\GLONASS coordinates recording and mapping of found communications;
• – Cable selection from the bundle;
• – Search for the place of damage by acoustic method.
TEKHNO-AS
Kolomna
Produced in: Kolomna, Moscow region
Trace searcher Success AG-309.30N
from
195 600 ₽
The trace searching kit is designed to accurately determine the location and depth of underground utilities (power and signal cable lines, reinforced fiber-optic lines, pipelines made of electrically conductive materials), troubleshooting cable lines, and also allows you to conduct a survey of the area in the shortest possible time and with great reliability before excavation and to prevent damage to engineering communications.
As part of the kit, the receiver is in the form of a monoblock with a large LCD display, which displays an image of the route and automatically calculates the depth of communication up to 10 m, as well as the current in the line.
The kit is equipped with the latest compact autonomous generator AG-107 with built-in batteries, display and built-in induction antenna, for tracing communication in a contactless way.
TEKHNO-AS
Kolomna
Produced in: Kolomna, Moscow region
Trace searcher Success AG-308.10N
from
146 400 ₽
A trace searching kit for finding underground utilities (cable lines, metal pipelines, and other communications made of conductive materials).
The kit includes a receiver in the form of a monoblock with LED indication and a compact autonomous generator with an output power of up to 20 watts and a range of up to 3 km.
Connection to the desired route is possible both by contact and contactless method.
TEKHNO-AS
Kolomna
Produced in: Kolomna, Moscow region
Mobile laboratory NEURONET TECHNOAS 4 based on Gazelle Next
Purpose of the NEURONET TECHNOAS 4 Laboratory
• – Universal educational complex of modern educational technologies;
• – Mobile remote and educational office for the working coherence of the subjects of activity.
The use of the NEURONET TECHNOAS 4 laboratory
• – Hardware and software complex based on multifunctional neuro-modular systems of electroencephalographs-recorders "Encephalan-EEGR-19/26";
• – Improving the productivity and profitability of the work of teams with physio-psychological diagnostics and correction, with machine neuro-training on biofeedback;
• – Biophysical individual adjustment of the central nervous system;
• – Conscious development of new reflexive meaningful states, rapid assimilation of new knowledge, skills, skills and actions;
• – Reduction of dangerous influences of the human factor in responsible professions (aviation and others);
• – Improving the effectiveness of educational programs for special education, retraining and advanced training.
NEURONET TECHNOAS 4 Laboratory Support System
• – MKZ safety control module;
• – Mass switches in all compartments;
• – Smart Home system, continuous monitoring of all life support systems with video recording;
• – Audible alarm;
• – Light alarm;
• – An autonomous power source from batteries with a 12/220 V voltage converter;
• – 12 V - 220 V sockets;
• – Hardware and software complex of neuro-modular systems of electroencephalographs-recorders "Encephalan-EEGR-19/26";
• – Hardware and software complexes of modern educational technologies integrated with the Central Control Unit (central control unit).
TEKHNO-AS
Kolomna
Produced in: Kolomna, Moscow region
Trace searcher Success AG-428.15N
from
160 770 ₽
The trace searching kit is designed to accurately determine the location and depth of underground utilities (power and signal cable lines, reinforced fiber-optic lines, pipelines made of electrically conductive materials), troubleshooting cable lines, and also allows you to conduct a survey of the area in the shortest possible time and with great reliability before excavation and to prevent damage to engineering communications.
The kit includes a digital multifunctional tracking receiver with a large LCD display and audio output both to the built-in speaker and to the operator's headphones.
Compact stand-alone generator with display and built-in induction antenna. The output power of the generator is up to 20 watts and the operating range is up to 3 km.
Connection to the desired route is possible both by contact and contactless method.
TEKHNO-AS
Kolomna
Produced in: Kolomna, Moscow region
Mobile laboratory for housing and communal services TECHNOAS
• Description of the TECHNOAS Housing and Communal Laboratory
o – Used for hydrodynamic flushing and emergency cleaning of sewage from sludge, sand, grease, household and industrial waste in sewer pipes.
o – Determining the location of underground utilities.
o – Search and tracing of metallic and non-metallic pipelines.
o – Determination of leakage coordinates by acoustic method in underground pressure steel, cast iron and plastic pipelines of heat and water supply systems, regardless of the depth of their laying, the type of soil, determining the exact location of the pipeline and the depth of its occurrence.
o – Search for manholes of wells under a layer of snow, soil, asphalt.
o – Analysis of the technical condition of the internal cavities of pipelines with a diameter of 60-2000 mm.
TEKHNO-AS
Kolomna
Produced in: Kolomna, Moscow region
Combined mobile laboratory up to 35 kV (ETL-35K)
The combined laboratory up to 35 kV (ETL-35K) consists of:
1. Test facility
• – Maximum rectified voltage up to 70 kV;
• – Maximum AC voltage of the industrial frequency of 50 Hz to 100 kV.
2. Insulation parameters meter
• – Transformation coefficient;
• – No-load losses at low voltage;
• – Short circuit resistance;
• – Voltage and current;
• – Power factor;
• – Frequency of the measured voltage (current);
• – Phase shift angle between voltage and current;
• – Measurement of the active resistance of the windings.
3. Burning facility
• – Maximum voltage up to 30 kV;
• – Maximum current up to 80 A;
• – Working hours are not limited;
• – Switching of stages is carried out without breaking the arc at the time of switching;
• – The ability to start working from any stage of burning (when working with low-voltage cables);
• – Built-in afterburning.
4. High voltage pulse generator
• – Output voltage 0...12 kV / 0...24 kV;
• – The pulse energy at each stage is 3000 J;
• – Built-in IDM for collaboration with the reflectometer.
5. Reflectometer
– Supports 3 methods of determining the location of damage:
• – By pulse reflectometry;
• – By the method of oscillatory discharge;
• – Pulse-arc method.
6. High-voltage cable defects detector
• – Determining the location and depth of the cable at a depth of up to 10 m;
• – Tracing at a distance of up to 10 km;
• – Search for live electrical cables;
• – Search for places where pipelines and cables intersect;
• – Determining the places of damage to cable lines;
• – Site surveys before excavation;
• – Search for places of damage to the external insulation of the cable;
• – GPS\GLONASS coordinates recording and mapping of found communications;
• – Cable selection from the bundle;
• – Search for the place of damage by acoustic method.
TEKHNO-AS
Kolomna
Produced in: Kolomna, Moscow region
Cable Finder Success KBI-306N
from
75 600 ₽
Description of the cable finder Success KBI-306N
• – Traceroute receiver in the form of a monoblock with LED indication and sound output to the built-in speaker.
• – Automatic calculation and display of the depth of communication up to 10 m.
Purpose of the cable finder Success KBI-306N
• – Search for live electrical cables.
• – Search and tracing of underground utilities (gas pipelines, pipelines, power and telephone cables).
• – Determination of the occurrence of underground utilities at a depth of up to 10 m.
Features of the AP-017N receiver
• – Modern digital traceroute receiver-monoblock.
• – Bright LED indicator.
• – Displays the measured depth value on the screen.
• – Determination of the deviation from the axis of the route by the LED indicator and the sound signal.
• – Wide range of operating frequencies (50 / 100 / 512 / 1024 / 1450 / 8192 / 8928 / 9820 Hz, Wide Band 12...24 kHz).
• – Frost-resistant, working at temperatures up to -40 ° C.
TEKHNO-AS
Kolomna
Produced in: Kolomna, Moscow region
Cable Finder Success KBI-211
from
48 600 ₽
An accessible tracer without a display with an audible indication in the operator's headphones. Extremely easy to use and in a compact, lightweight case.
Purpose of the cable finder Success KBI-211
• – Search for live electrical cable lines.
• – Search for places where the pipeline and cable intersect.
• – Determination of the occurrence of underground utilities at a depth of up to 6 m.
Features of the AP-004 receiver
• – Analog traceroute receiver.
• – Audio indication in the operator's headphones, the real sound is 50 Hz.
• – Frost-resistant, working at temperatures up to -30 °C.
• – Lightweight, compact housing.
TEKHNO-AS
Kolomna
Produced in: Kolomna, Moscow region
Trace Searcher Success AG-308.60N
from
205 800 ₽
A trace searching kit for finding underground utilities (cable lines, metal pipelines, and other communications made of conductive materials).
The kit includes a receiver in the form of a monoblock with LED indication, as well as a generator with increased power up to 180 watts and a range of up to 5 km.
Connection to the desired route is possible both by contact and contactless method.
TEKHNO-AS
Kolomna
Produced in: Kolomna, Moscow region
Cable Finder Success KBI-106
from
54 600 ₽
Digital tracer device with LED scale and audio output to the operator's headphones. Extremely easy to use and in a compact, lightweight case. Designed for:
• – search for live electrical cable lines.
• – search for places where the pipeline and cable intersect.
• – determination of the occurrence of underground utilities at a depth of up to 6 m .
Features of the AP-014 receiver
• – Digital traceroute receiver.
• – Additional LED indication of the signal level.
• – Wide range of operating frequencies (50 / 100 / 512 / 1024 / 8192 / 32768 Hz, Wide Band 50...2000 Hz).
• – Frost-resistant, working at temperatures up to -30 ° C.
• – Lightweight, compact housing.
TEKHNO-AS
Kolomna
Produced in: Kolomna, Moscow region
Mobile laboratory for 0.4-10 kV cable lines based on a trailer (ETL-10)
Laboratory for 0.4-10 kV cable lines based on a trailer (ETL-10) includes:
1. Test facility
– Maximum rectified voltage up to 70 kV;
– Maximum AC voltage of the industrial frequency of 50 Hz to 50 kV.
2. Burning facility
– Maximum voltage up to 30 kV;
– Maximum current up to 80 A;
– Working hours are not limited;
– Switching stages is carried out without breaking the arc at the time of switching;
– The ability to start working from any stage of burning (when working with low–voltage cables);
- Built-in afterburning.
3. High voltage pulse generator
• – Output voltage 0...12 kV / 0...24 kV;
• – The pulse energy at each stage is 3000 J;
• – Built-in IDM for collaboration with the reflectometer.
5. High-voltage cable defects detector
• – Determining the location and depth of the cable at a depth of up to 10 m;
• – Tracing at a distance of up to 10 km;
• – Search for live electrical cables;
• – Search for places where the pipeline and cable intersect;
• – Determining the places of damage to cable lines;
• – Site surveys before excavation;
• – Search for places of damage to the external insulation of the cable;
• – GPS\GLONASS coordinates recording and mapping of found communications;
• – Cable selection from the bundle;
• – Search for the place of damage by acoustic method.
6. Autonomous air heater Planar
– An autonomous air heater Planar with a capacity of 2 kW or an analog with a 7.5 l fuel tank.
TEKHNO-AS
Kolomna
Produced in: Kolomna, Moscow region
Stationary metrological laboratory
The SML is a stationary object located in the existing production premises of the customer or new buildings built according to the project documentation.
The technical basis of the SML is made up of up to ten automated workstations (APM ST) for SI verification (calibration) and up to three workstations (RM ST) for diagnostics, adjustment and repair of SI.
The ARM ST includes software that allows you to perform SI verification according to a given algorithm and document the results.
All SML equipment is placed on standard basic load-bearing structures (BNC).
At present, design documentation has been developed and the production of automated control systems has been mastered for the complete set of SML of almost all types of radio and electrical measuring devices, pressure and vacuum SI, SI geometric quantities and other SI.
If necessary, the specialists of JSC "NPF "Techno-yaks" are ready to train specialists (ARM operators).
Terms and conditions of financing, development, manufacturing, installation, training of specialists are implemented on the basis of contractual relations with customers
TEKHNOYAKS
Moscow
Produced in: Moscow
VD-12NFP Eddy Current Flaw Detector with 2 converters
from
254 000 ₽
The device allows you to detect surface defects like cracks, visualizing the signal from the continuity interruptions on the display. The design of the flaw detector allows to determine with high reliability the exact location and depth of defects even on rough surfaces of flat and curved shape, including under a layer of corrosion or in the presence of a protective coating of the controlled area of the product with a thickness of up to 3 mm.
The principle of operation of the VD-12NFP eddy current flaw detector:
The principle of operation of the VD-12NFP eddy current flaw detector is based on the phenomenon of electromagnetic induction. An alternating magnetic field created in the primary coil of the converter by means of a sinusoidal voltage generator excites eddy currents in the controlled product. A parasitic magnetic field formed by eddy currents at the locations of defects affects the measuring unit (two signal coils connected in series) of the converter, creating an electromotive force in it. The amplitude and phase of the secondary signal carries information about the properties of the defect and the position of the transducer relative to the surface of the controlled product. The output signal from the measuring unit of the converter, after amplification and processing using a microprocessor, is displayed on the readout of the device, and is also stored in the memory block for subsequent transmission to a personal computer. In addition, information about the defects is displayed on a piezoelectric bell used as an audio indicator.
Design, features and advantages of the VD-12NFP eddy current control device:
The VD-12NFP eddy current flaw detector is a portable device capable of working both in a desktop and in a suspended position in a special bag-case. This ensures convenient operation of the device in a variety of conditions: in the laboratory, in the factory shop or during field tests. The flaw detector consists of an electronic unit with controls and display of test results, as well as three replaceable converters with wear-resistant corundum tips connected to the electronic unit using a connector. The choice of the desired converter depends on the magnetic properties of the material. For the control of parts with grooves, a converter with an inclined tip is offered. The device is powered by 4 AA batteries located in the battery compartment of the electronic unit.
The advantages of the flaw detector include:
- a screen for visualizing the signal during measurement;
- light weight and compact dimensions that allow you to use the device in almost any conditions;
- the ability to control the quality of products of various curvature and surface roughness even in the presence of a protective coating or a layer of corrosion;
- wear resistance of converters, which is important when monitoring products with increased surface roughness (up to Rz£320);
- automatic detection of the type of converter when connected, as well as the presence of built-in memory for storing control results;
- the possibility to transfer data to a personal computer for storing or printing control protocols.
Scope of application:
Portability, high productivity, the ability to work with curved and rough surfaces, as well as the fact that the operation of the flaw detector is practically unaffected by humidity, pressure and contamination of the gas environment or the surface of the controlled product with non-conductive substances ensure the versatility of the device for detecting cracks in various materials.
The eddy current flaw detector VD-12NFP is actively used in heavy industry for diagnostics of metal structures, assemblies and mechanisms for various purposes in factory workshops or laboratories, including at enterprises of railway transport, automotive industry, mechanical engineering, pipelines and metal structures.
The VD-12NFP flaw detector can be used with equal success in the field, factory workshops, depots, laboratories and workshops to monitor the current condition, as well as to assess the degree of wear, the possibility and duration of further operation of such products made of metals and alloys as over-spring beams, wagon wheels, auto coupler housings, side frames, wheel couples and others.
Distinctive features:
• control of parts with surface roughness up to Rz320 due to wear-resistant corundum tips;
• assessment of the degree of danger (depth) of the defect;
• automatic detection of the converter type;
• microprocessor control;
• 5 universal programs for saving settings;
• capable of detecting defects with a depth of 0.3 mm
• The angle of deviation of the converter from the normal to the working surface up to 60°
• Operating frequency of 70 kHz;
• Maximum working clearance of 3mm;
• visualization of the signal from the defect;
• built-in memory for storing control results
• Equipped with a Bluetooth 2.0 wireless communication module, which allows you to transmit control results and control the flaw detector at a distance of up to 20m;
• The possibility of forming a control protocol based on the data transmitted to the PC;
• Temperature range from 0°C to +40°C;
• The design allows you to work with the flaw detector without removing it from the bag-case.
Basic kit:
Ia5.173.016: 1 electronic unit
Ia5.125.031: 1 converter, type 1; marked as (•)
Ia5.125.030: 1 converter, type 2; marked as (••)
Ia2.706.002: the KOIDZ-VD set of samples with a passport (consisting of:
Ia8.896.034: 1 piece;
Ia8.896.035: 1 piece;
Ia8.896.035-01: 1 piece) - A certificate of verification.
4 AA batteries
1 charger
1 small-sized phone
1 CD with software
1 special key
1 bag-case
A calibration certificate is issued for the VD-12NFP flaw detector.
1 passport
1 operating manual
1 calibration instruction
RII MNPO SPEKTR
Moscow
Produced in: Moscow
Universal calibrator H4-301
Technical specifications:
Voltage reproduction range Uk 200 mV 0.07 + 0.01
DC: from 50 MV to 600 V, Uk 2 V 0.05 + 0.005
sub-bands (Uk) 200 mV; 2; 20; 200; 600 V Uk 20 V 0.05 + 0.005
Basic error, ± (% of U + % of Uk): Uk 200 V 0.07 + 0.01
Uk 600 V 0.1 + 0.02
Voltage reproduction range UK 200 mV 0.2 + 0.05
AC: from 1 mV to 600 V, Uk 2; 20 V 0.15 + 0.02
sub-bands (Uk) 200 mV; 2; 20; 200; 600 V from 20 Hz to 20 kHz
Basic error, ± (% of U + % of Uk): sv. 20 to 40 kHz 0.2 + 0.1
Uk 200 V; 600 V:
from 40 Hz to 1 kHz 0.2 + 0.05
Power reproduction range Ik 200 Ma 0.1 + 0.02
DC: from 1 Ma to 5 A, Ik 2; 20; 200 mA 0.1 + 0.01
sub-bands (Ik) 200 Ma; 2; 20; 200 mA; 2; 5 A Ik 2 A; 5 A 0.1 + 0.02
Basic error, ± (% of I + % of Ic):
AC power reproduction range: from 10 Ma to 5 A
sub-bands (Ic) 200 Ma; 2; 20; 200 mA; 2; 5 A 0.15 + 0.05
Frequency range from 20 Hz to 1 kHz
Basic error, ± (% of I + % of Ic):
USB interface
Operating temperature range from minus 10 °C to + 50 °C
Dimensions; weight 420×342×184.5 mm; 10 kg
MNIPI
Minsk
Produced in: Belarus, Minsk
INSULATION PARAMETER METER PARMA TENSOR-2
PARMA TENSOR-2 (AC bridge) is designed for automatic measurements of:
· capacitance and tangent of the dielectric loss angle of high-voltage insulation of capacitors, inputs, transformers using an external high-voltage capacitor, both in laboratory and in the "field" conditions
· effective values of the first harmonic of the current and voltage of the industrial frequency
· the angle of phase shift between the signals supplied to the inputs of the device
· network frequencies
* Measurements can be carried out according to the "straight" and "inverse" (inverted) scheme.
* Allocates the vector of the influence current, which makes it possible to dispense with the phase regulator of the test voltage source or devices for compensating the influence current.
PARMA
Saint Petersburg
Produced in: Saint Petersburg
VOLTAMMETER PARMA VAF-A(C)
Scope of application
· operational maintenance of relay protection circuits and power circuits of electrical installations
· phasing during adjustment of differential protection, connection of current and voltage transformers, electric motors
· control of the correct phasing of the connection accounting circuits
· removal of the volt-ampere characteristic and measurement of angles
· monitoring of single- and three-phase circuits in power supply cabinets
PARMA
Saint Petersburg
Produced in: Saint Petersburg
COMBI-02M (ASSISTANT, METEOSCOPE-M, TKA-09)
from
347 000 ₽
A set for measuring sound levels, infrasound, ultra-sound and vibration, measuring microclimatic parameters of the air environment (temperature, humidity, pressure, air velocity), as well as measuring illumination, brightness and pulsation coefficient.
NMT-ZASHCHITA
Moscow
Produced in: Moscow
COMBO-SOUT (Assistant-TOTAL, METEOSCOPE-M + Black ball, VE-meter (50Hz Modification), TKA-LUX, TKA-PKM-13)
from
530 000 ₽
A COMBO-SOUT kit for carrying out a special assessment of working conditions in a reliable, shockproof, moisture- and dust-proof case.
NMT-ZASHCHITA
Moscow
Produced in: Moscow
Kit for measuring coaxial connectors KISK-7M
from
178 000 ₽
VNIIFTRI
Mendeleevo
Produced in: Mendeleevo, Moscow region
Electromagnetic radiation level meter P3-100
Broadband electromagnetic radiation meters P3-100 (hereinafter referred to as meters P3-100) are designed for measurements
energy flux densities (PPE) in the frequency range from 300 MHz to 40 GHz;
electric field strength (NEP) from 9 kHz to 300 MHz;
magnetic field strength (NEP) from 9 kHz to 50 MHz.
NNPO im. M.V.Frunze
Nizhny Novgorod
Produced in: Nizhny Novgorod
Device for measuring attenuation stepwise D1-25
NNPO im. M.V.Frunze
Nizhny Novgorod
Produced in: Nizhny Novgorod
ION-3701 Version "North"
from
77 245 ₽
A small-sized digital magnetometer (gaussmeter, teslameter), a residual magnetization meter ION-3701 version "North" is a modern high-precision device (a variant of the ION-3701 device) and used for a wide range of tasks in areas where it is necessary to determine the magnitude of the magnetic field and residual magnetization in adverse climates, conditions of negative temperatures, the Far North and etc . It is equipped with a three-dimensional magnetic field sensor and has outstanding technical characteristics and extensive functionality.
NPP "ELEKTRONNYE PRIBORY"
Naberezhnye Chelny
Produced in: Tatarstan, Naberezhnye Chelny
