SFP+ CWDM Transceiver

It is designed to measure relative humidity and air temperature in industrial, warehouse and residential premises, in climatic chambers and technological highways, in open areas (weather stations). Technical specifications: Measurement of relative humidity measuring range (10-100) % resolution 0.1% basic measurement error ± 3% Temperature measurement measuring range (-60 ... +300) ° C resolution 0.1 °C measurement error ± (0.5 - 1.5) ° C Power supply network adapter, built-in battery USB 2.0 interface Weight 1.5 kg The verification interval is 1 year

Receiving and transmitting modules for electrical communication lines in SFP metal enclosures with separate optical input/output for an RJ-45 type electrical connector for data transmission over a category 5 twisted pair.

Receiving and transmitting modules for electrical communication lines in SFP metal cases with separate optical input/output for an RJ-45 type electrical connector to transmit the signal over two optical fibres.

A single-fiber converter 100base-FX, single-mode WDM, acSC connector, working distance from 20 to 80 km. The output optical power of the transmitter is -13~ -6 dBm, the sensitivity of the receiver is 36 dBm. Delivery of the product is possible in two versions: Media converters without DIP switch. Media converters that support the LFP (Link Fault Pass Through) (LLCF/LLR) function using the DIP switch. The LLCF/LLR function allows you to instantly receive information when communication problems occur and provide an effective solution for monitoring the network with the possibility of automatic redundancy. The DIP switch disables or enables the use of the LFP function.

Optical transceivers are available in 9-pin plastic cases with a single optical input/output for SC type connectors.

A dual-fiber converter 100base-FX, SC connector, working distance from 2 to 80km Converters MCDM2-10/100 are designed to convert electrical signals in Ethernet networks transmitted over a twisted pair to an optical interface and vice versa. The output optical power of the transmitter is -20~ -12dBm, the sensitivity of the receiver is 31 dBm.

rated output power - 2.0 kW; maximum output power - 2.8 kW; rated supply voltage - DC 400V; Efficiency (depending on frequency) - 95...98%; operating time in CW mode without cooling at an initial temperature of 25°C - 30...60 sec. size with radiator - 310 x 105 x 70 mm; weight with radiator - 3.6 kg. The module has a built-in autonomous temperature protection and RF transistor current protection. There is an input of external blocking of the RF path, which can be used as an input of amplitude modulation. MAG-1K0.LF modules are used to build all Plasma GK series RF generators with frequencies of 0.35...2.0 MHz.

The optical parameters of the media converter are determined by the parameters of the SFP modules installed in the corresponding slot of the media converter. The media converter supports working with various SFP modules with a supply voltage of 3.3 V and a data transfer rate of up to 1250 Mbit/s, that allows you to organize data transmission at distances from 0.5 to 120 km, both over multimode and single-mode fiber in two- or single-fiber communication lines. The analogue of this media converter for the SFP module is Planet GT-805A.

A dual-fiber optical transceiver in a GBIC metal case, 1.25 Gb/s, SC connector, hot-swappable

SFP+ modules are used to organize high-speed duplex channels with data transfer rates up to 10 Gbit/s. WDM SFP+ optical transceivers are designed to organize a duplex communication channel in a single fiber. CWDM SFP+ allows you to organize 10 Gbit/s channels in passive CWDM systems.

The set of devices includes a microwave transmitter module, a microwave receiver module, a set of devices (metal reflecting screens, a refractive prism, an absorbing screen, etc.) to demonstrate the properties of electromagnetic waves (radiation, absorption, reflection, refraction, interference, diffraction). Technical specifications: The wavelength of the microwave transmitter is 3 – 4 cm; The average value of the energy flux density emitted by the microwave transmitter meets the requirements of the SanPiN 2.4/2.1.8.9-36-2002 (no more than 10 MW/ sq. m.). Receiver (transmitter) weight, not more than 0.3 kg Overall dimensions of the receiver (transmitter) 172x25x77 mm The microwave receiver module has a built-in interface for connecting to a personal computer and provides the ability to display the measured information on the PC screen. The kit includes an electronic media with software (CD-ROM) to demonstrate the operation of the equipment on the monitor screen of a personal computer.

XFP (10-Gigabit Small Form Factor Pluggable) is a protocol—independent hot-swappable optical transceiver, usually operating at 850nm, 1310nm or 1550nm wavelengths or wavelengths from the CWDM band at a speed of 10 gigabits per second in SONET/SDH, Fiber Channel, Gigabit Ethernet, 10 Gigabit Ethernet and other applications, including WDM channels.