Catalog
Back to search results
Mobile laboratory for 0.4-10 kV cable lines and cable lines made of cross-linked polyethylene (ETL-10/SNH)
Back to search results
Mobile laboratory for 0.4-10 kV cable lines and cable lines made of cross-linked polyethylene (ETL-10/SNH)
Laboratory equipment for 0.4-10 kV cable lines and cable lines made of cross-linked polyethylene (ETL-10/SNH)
1. Test facility
• – Maximum rectified voltage up to 70 kV;
• – Maximum AC voltage of the industrial frequency of 50 Hz to 50 kV.
2. SNCH test facility
• – Sinusoidal 0-24 kV peak, symmetrical (error ± 1%);
• – Rectangular 0-30 kV peak, symmetrical (error ± 1%);
• – Constant 0-30 kV of both polarities (error ± 1%);
• – Output current 0-30 mA resolution 1 ma (error ±1%);
• – Resistance range 0.1 Mohm -15 Mohm;
• – The frequency of the output signal is 0.01-1 Hz in increments of 0.01 Hz, automatic frequency selection.
3. Burning installation
• – Maximum voltage up to 30 kV;
• – Maximum current up to 80 A;
• – Working hours are not limited;
• – Switching of stages is carried out without breaking the arc at the time of switching;
• – The ability to start working from any stage of burning (when working with low–voltage cables);
- Built-in afterburning.
4. High voltage pulse generator
• – Output voltage 0...12 kV / 0...24 kV;
• – The pulse energy at each stage is 3000 J;
• – Built-in IDM for collaboration with the reflectometer.
5. Reflectometer
– Supports 3 methods of determining the location of damage:
• – By pulse reflectometry;
• – By the method of oscillatory discharge;
• – Pulse-arc method.
6. High-voltage cable detector
• – Determining the location and depth of the cable at a depth of up to 10 m;
• – Tracing at a distance of up to 10 km;
• – Search for live electrical cables;
• – Search for places where the pipeline and cable intersect;
• – Determining the places of damage to cable lines;
• – Site surveys before excavation;
• – Search for places of damage to the external insulation of the cable;
• – GPS\GLONASS coordinates recording and mapping of found communications;
• – Cable selection from the bundle;
• – Search for the place of damage by acoustic method.
7. Autonomous gasoline generator
• – Rated power 7.5 kVA.
1. Test facility
• – Maximum rectified voltage up to 70 kV;
• – Maximum AC voltage of the industrial frequency of 50 Hz to 50 kV.
2. SNCH test facility
• – Sinusoidal 0-24 kV peak, symmetrical (error ± 1%);
• – Rectangular 0-30 kV peak, symmetrical (error ± 1%);
• – Constant 0-30 kV of both polarities (error ± 1%);
• – Output current 0-30 mA resolution 1 ma (error ±1%);
• – Resistance range 0.1 Mohm -15 Mohm;
• – The frequency of the output signal is 0.01-1 Hz in increments of 0.01 Hz, automatic frequency selection.
3. Burning installation
• – Maximum voltage up to 30 kV;
• – Maximum current up to 80 A;
• – Working hours are not limited;
• – Switching of stages is carried out without breaking the arc at the time of switching;
• – The ability to start working from any stage of burning (when working with low–voltage cables);
- Built-in afterburning.
4. High voltage pulse generator
• – Output voltage 0...12 kV / 0...24 kV;
• – The pulse energy at each stage is 3000 J;
• – Built-in IDM for collaboration with the reflectometer.
5. Reflectometer
– Supports 3 methods of determining the location of damage:
• – By pulse reflectometry;
• – By the method of oscillatory discharge;
• – Pulse-arc method.
6. High-voltage cable detector
• – Determining the location and depth of the cable at a depth of up to 10 m;
• – Tracing at a distance of up to 10 km;
• – Search for live electrical cables;
• – Search for places where the pipeline and cable intersect;
• – Determining the places of damage to cable lines;
• – Site surveys before excavation;
• – Search for places of damage to the external insulation of the cable;
• – GPS\GLONASS coordinates recording and mapping of found communications;
• – Cable selection from the bundle;
• – Search for the place of damage by acoustic method.
7. Autonomous gasoline generator
• – Rated power 7.5 kVA.
Trace Searcher Success AG-309.20N
from
161 400 ₽
A trace searching kit for searching underground utilities (cable lines, metal pipelines, and other communications made of conductive materials).
The kit includes a receiver in the form of a monoblock with a large LCD display, which displays an image of the route and automatically calculates the depth of communication up to 10 m, as well as the current in the line, as well as a compact autonomous generator with an output power of up to 20 watts and a range of up to 3 km.
Connection to the desired route is possible both by contact and contactless method.
TEKHNO-AS
Kolomna
Produced in: Kolomna, Moscow region
Mobile electrotechnical laboratory ETL TECHNOAS 2 based on Gazelle Next NN
The purposes of the ETL TECHNOAS 2 laboratory based on Gazelle Next NN are:
• – Testing and searching for damage to cable lines up to 10 kV + SNF (cross–linked polyethylene);
• - Posititioning of the location and depth of underground utilities (power and signal cables);
• – Identifying the nature of the damage and the distance to the damage site without burning the cable insulation;
• – Testing of the cable with alternating high voltage;
• – Tests of power cables and cable sheaths with cross-linked polyethylene insulation;
• – Measurement of insulation resistance of electrical circuits.
ETL TECHNOAS 2 laboratory based on Gazelle Next NN consists of following parts standartly:
1. – Color design;
1. – Laboratory compartment;
1. – Partition between compartments;
1. – Windows: rear side-blind, there is a plastic window with a cable coupling in the rear door;
1. – A 10x10 hatch in the lower right corner for cable output;
1. – Finishing of sidewalls and ceiling;
1. – Floor covering: autolinoleum;
1. – On-duty lighting: standard;
1. – Working lighting: fluorescent lamps;
1. – Furniture: main stand, soft seat.
Electrical safety system of ETL TECHNOAS 2 laboratory based on Gazelle Next NN incledes following parts:
• – MKZ safety control module;
• – Locking switches on the doors of the in/out compartment;
• – Audible alarm;
• – Light alarm;
• – Emergency shutdown button;
• – Input release with visible contact break.
Additional equipment of ETL TECHNOAS 2 laboratory based on Gazelle Next NN includes:
• – 12/220 V voltage converter;
• – Diesel/gasoline generator (for field operation);
• – Laboratory power management system;
• – Additional heater;
• – Air conditioning.
TEKHNO-AS
Kolomna
Produced in: Kolomna, Moscow region
Mobile laboratory for housing and communal services TECHNOAS
• Description of the TECHNOAS Housing and Communal Laboratory
o – Used for hydrodynamic flushing and emergency cleaning of sewage from sludge, sand, grease, household and industrial waste in sewer pipes.
o – Determining the location of underground utilities.
o – Search and tracing of metallic and non-metallic pipelines.
o – Determination of leakage coordinates by acoustic method in underground pressure steel, cast iron and plastic pipelines of heat and water supply systems, regardless of the depth of their laying, the type of soil, determining the exact location of the pipeline and the depth of its occurrence.
o – Search for manholes of wells under a layer of snow, soil, asphalt.
o – Analysis of the technical condition of the internal cavities of pipelines with a diameter of 60-2000 mm.
TEKHNO-AS
Kolomna
Produced in: Kolomna, Moscow region
Mobile laboratory for 0.4-10 kV cable lines based on a trailer (ETL-10)
Laboratory for 0.4-10 kV cable lines based on a trailer (ETL-10) includes:
1. Test facility
– Maximum rectified voltage up to 70 kV;
– Maximum AC voltage of the industrial frequency of 50 Hz to 50 kV.
2. Burning facility
– Maximum voltage up to 30 kV;
– Maximum current up to 80 A;
– Working hours are not limited;
– Switching stages is carried out without breaking the arc at the time of switching;
– The ability to start working from any stage of burning (when working with low–voltage cables);
- Built-in afterburning.
3. High voltage pulse generator
• – Output voltage 0...12 kV / 0...24 kV;
• – The pulse energy at each stage is 3000 J;
• – Built-in IDM for collaboration with the reflectometer.
5. High-voltage cable defects detector
• – Determining the location and depth of the cable at a depth of up to 10 m;
• – Tracing at a distance of up to 10 km;
• – Search for live electrical cables;
• – Search for places where the pipeline and cable intersect;
• – Determining the places of damage to cable lines;
• – Site surveys before excavation;
• – Search for places of damage to the external insulation of the cable;
• – GPS\GLONASS coordinates recording and mapping of found communications;
• – Cable selection from the bundle;
• – Search for the place of damage by acoustic method.
6. Autonomous air heater Planar
– An autonomous air heater Planar with a capacity of 2 kW or an analog with a 7.5 l fuel tank.
TEKHNO-AS
Kolomna
Produced in: Kolomna, Moscow region
Cable finder Success KBI-309M (frost-resistant)
from
95 400 ₽
Description of the cable finder Success KBI-309M
• – A traceroute receiver in the form of a monoblock with a frost-resistant LCD display.
• – Graphical representation of the route on the device screen.
• – Automatic calculation and display of the depth of the communication up to 10 m, as well as the current in the line.
Purpose of the cable finder Success KBI-309M
• – Search for live electrical cables.
• – Search and tracing of underground utilities (gas pipelines, pipelines, power and telephone cables).
• – Determination of the occurrence of underground utilities at a depth of up to 10 m.
Features of the AP-019M receiver
• – Modern digital tracer receiver-monoblock AP-019M.
• – The image of the route on the device screen.
• – Automatic calculation and display of the depth of communication and current in the line.
• – Several options for displaying information on the receiver indicator: "Route", "Graph", "Graph+", "Minimum maximum" and "2-frequencies" allow the operator to use the device's capabilities as efficiently as possible.
• – Additional functions when connecting external sensors.
• – Wide range of operating frequencies (50(60) / 100(120) / 512 / 1024 / 8192 / 32768 Hz, wide band 40...8000 Hz, radio 8...40 kHz).
• – Frost-resistant, working at temperatures up to -30 ° C.
• – Menu in two languages (Russian and English).
TEKHNO-AS
Kolomna
Produced in: Kolomna, Moscow region
Trace Searcher Success AG-408.10
from
160 770 ₽
A trace searching kit for finding underground utilities (cable lines, metal pipelines, and other communications made of conductive materials). Compact stand-alone generator with an output power of up to 20 watts and a range of up to 3 km. Connection to the desired route is possible both by contact and contactless method.
Multifunctional tracer receiver with arrow indicator and audio output to the operator's headphones.
Frost-resistant and lightweight housing. Leak detector/flaw detector function (using an optional acoustic sensor).
TEKHNO-AS
Kolomna
Produced in: Kolomna, Moscow region
Trace searcher Success AG-528.60N
from
225 630 ₽
The trace searching kit is designed to accurately determine the location and depth of underground utilities (power and signal cable lines, reinforced fiber-optic lines, pipelines made of electrically conductive materials), troubleshooting cable lines, and also allows you to conduct a survey of the area in the shortest possible time and with great reliability before excavation and to prevent damage to engineering communications.
The kit includes a digital multifunctional tracking receiver with a large LCD display and audio output both to the built-in speaker and to the operator's headphones.
The generator has increased power up to 180 watts and a range of up to 5 km. Connection to the desired route is possible both by contact and contactless method.
TEKHNO-AS
Kolomna
Produced in: Kolomna, Moscow region
Mobile laboratory for 0.4-10 kV cable lines (ETL-10)
Laboratory for 0.4-10 kV cable lines (ETL-10) consists of:
1. Test facility
• – Maximum rectified voltage up to 70 kV;
• – Maximum AC voltage of the industrial frequency of 50 Hz to 50 kV.
2. Burning facility
• – Maximum voltage up to 30 kV;
• – Maximum current up to 80 A;
• – Working hours are not limited;
• – Switching of stages is carried out without breaking the arc at the time of switching;
• – The ability to start working from any stage of burning (when working with low-voltage cables);
• – Built-in afterburning.
3. High voltage pulse generator
• – Output voltage 0...12 kV / 0...24 kV;
• – The pulse energy at each stage is 3000 J;
• – Built-in IDM for collaboration with the reflectometer.
4. Reflectometer
– Supports 3 methods of determining the location of damage:
• – By pulse reflectometry;
• – By the method of oscillatory discharge;
• – Pulse-arc method.
5. High-voltage cable defects detector
• – Determining the location and depth of the cable at a depth of up to 10 m;
• – Tracing at a distance of up to 10 km;
• – Search for live electrical cables;
• – Search for places where the pipeline and cable intersect;
• – Determining the places of damage to cable lines;
• – Site surveys before excavation;
• – Search for places of damage to the external insulation of the cable;
• – GPS\GLONASS coordinates recording and mapping of found communications;
• – Cable selection from the bundle;
• – Search for the place of damage by acoustic method.
TEKHNO-AS
Kolomna
Produced in: Kolomna, Moscow region
Trace searcher Success AG-309.15N
from
183 540 ₽
The trace searching kit is designed to accurately determine the location and depth of underground utilities (power and signal cable lines, reinforced fiber-optic lines, pipelines made of electrically conductive materials), troubleshooting cable lines, and also allows you to conduct a survey of the area in the shortest possible time and with great reliability before excavation and to prevent damage to engineering communications.
As part of the kit, the receiver is in the form of a monoblock with a large LCD display, which displays an image of the route and automatically calculates the depth of the communication up to 10 m, as well as the current in the line. Connection to the desired route is possible both by contact and contactless method.
TEKHNO-AS
Kolomna
Produced in: Kolomna, Moscow region
Mobile laboratory NEURONET TECHNOAS 4 based on Gazelle Next
Purpose of the NEURONET TECHNOAS 4 Laboratory
• – Universal educational complex of modern educational technologies;
• – Mobile remote and educational office for the working coherence of the subjects of activity.
The use of the NEURONET TECHNOAS 4 laboratory
• – Hardware and software complex based on multifunctional neuro-modular systems of electroencephalographs-recorders "Encephalan-EEGR-19/26";
• – Improving the productivity and profitability of the work of teams with physio-psychological diagnostics and correction, with machine neuro-training on biofeedback;
• – Biophysical individual adjustment of the central nervous system;
• – Conscious development of new reflexive meaningful states, rapid assimilation of new knowledge, skills, skills and actions;
• – Reduction of dangerous influences of the human factor in responsible professions (aviation and others);
• – Improving the effectiveness of educational programs for special education, retraining and advanced training.
NEURONET TECHNOAS 4 Laboratory Support System
• – MKZ safety control module;
• – Mass switches in all compartments;
• – Smart Home system, continuous monitoring of all life support systems with video recording;
• – Audible alarm;
• – Light alarm;
• – An autonomous power source from batteries with a 12/220 V voltage converter;
• – 12 V - 220 V sockets;
• – Hardware and software complex of neuro-modular systems of electroencephalographs-recorders "Encephalan-EEGR-19/26";
• – Hardware and software complexes of modern educational technologies integrated with the Central Control Unit (central control unit).
TEKHNO-AS
Kolomna
Produced in: Kolomna, Moscow region
Mobile laboratory for 0.4-35 kV cable lines (ETL-35)
Laboratory equipment for 0.4-35 kV cable lines (ETL-35)
1. Test facility
• – Maximum rectified voltage up to 70 kV;
• – Maximum AC voltage of the industrial frequency of 50 Hz to 100 kV.
2. Burning facility
• – Maximum voltage up to 30 kV;
• – Maximum current up to 80 A;
• – Working hours are not limited;
• – Switching of stages is carried out without breaking the arc at the time of switching;
• – The ability to start working from any stage of burning (when working with low-voltage cables);
• – Built-in afterburning.
3. High voltage pulse generator
• – Output voltage 0...12 kV / 0...24 kV;
• – The pulse energy at each stage is 3000 J;
• – Built-in IDM for collaboration with the reflectometer.
4. Reflectometer
– Supports 3 methods of determining the location of damage:
• – By pulse reflectometry;
• – By the method of oscillatory discharge;
• – Pulse-arc method.
5. High-voltage cable defects detector
• – Determining the location and depth of the cable at a depth of up to 10 m;
• – Tracing at a distance of up to 10 km;
• – Search for live electrical cables;
• – Search for places where the pipeline and cable intersect;
• – Determining the places of damage to cable lines;
• – Site surveys before excavation;
• – Search for places of damage to the external insulation of the cable;
• – GPS\GLONASS coordinates recording and mapping of found communications;
• – Cable selection from the bundle;
• – Search for the place of damage by acoustic method.
TEKHNO-AS
Kolomna
Produced in: Kolomna, Moscow region
Universal mobile complex for verification and repair of measuring instruments
The complex is equipped with air conditioning, heating and ventilation systems to create and maintain a set temperature level
(20-25) ° C in the container body, at an outdoor temperature from minus 40 ° C to 40 ° C.
Operating conditions
Ambient air temperature from minus 40 to 40 ° C;
Relative humidity up to 95 % at tº= 30 ° C;
Atmospheric pressure from 84.0 to 106.7 kPa (from 630 to 800 mm Hg);
General-purpose power supply: alternating three-phase current with a frequency of (50 ± 1) Hz with a RMS voltage value in each phase (380 ± 38) V.
A set of functionally related working standards, special equipment and automation tools allows you to implement complex metrological maintenance of measuring instruments at automated (automated) and non-automated (RM) workplaces
TEKHNOYAKS
Moscow
Produced in: Moscow
Trace Searcher Success AG-501
from
137 940 ₽
A trace searching kit for finding underground communications (cable lines, metal pipelines, and other communications made of conductive materials) with a digital tracerouting receiver.
The kit is equipped with a compact stand-alone generator with a display and a built-in induction antenna. The output power of the generator is up to 20 watts and the operating range is up to 3 km.
Connection to the desired route is possible both by contact and contactless method.
TEKHNO-AS
Kolomna
Produced in: Kolomna, Moscow region
Cable Finder Success KBI-206
from
82 110 ₽
Multifunctional tracer device with a pointer indicator and audio output to the operator's headphones.
Purpose of the cable finder Success KBI-206
• – Search for live electrical cable lines.
• – Search for places where the pipeline and cable intersect.
• – Determination of the occurrence of underground utilities at a depth of up to 6 m.
• – Survey of the territory before excavation.
Features of the AP-010M receiver
• – Analog traceroute receiver.
• – Arrow indicator of the signal level.
• – Wide range of operating frequencies (50 / 100 / 512 / 1024 / 8928 Hz, "Wide Band" mode), frequency filters.
• – Frost-resistant, working at temperatures up to -30 °C.
• – Possibility to additionally connect an acoustic sensor (leak detector / flaw detector function).
TEKHNO-AS
Kolomna
Produced in: Kolomna, Moscow region
Mobile Laboratory For The Control Of Physical Factors
The companies NTM-Zashchita LLC (Moscow) and Avtospectr-NN (Nizhny Novgorod) have implemented a joint project "Mobile Laboratory for Physical Factors Control", which is a mobile complex equipped with the most modern equipment of well-known Russian and foreign manufacturers, designed to effectively solve the problems of sanitary and hygienic control and labor protection, certification of workplaces and monitoring of the production environment.
NMT-ZASHCHITA
Moscow
Produced in: Moscow
Trace searcher Success AG-308.10N
from
146 400 ₽
A trace searching kit for finding underground utilities (cable lines, metal pipelines, and other communications made of conductive materials).
The kit includes a receiver in the form of a monoblock with LED indication and a compact autonomous generator with an output power of up to 20 watts and a range of up to 3 km.
Connection to the desired route is possible both by contact and contactless method.
TEKHNO-AS
Kolomna
Produced in: Kolomna, Moscow region
Trace Searcher Success AG-309.20N
from
161 400 ₽
A trace searching kit for searching underground utilities (cable lines, metal pipelines, and other communications made of conductive materials).
The kit includes a receiver in the form of a monoblock with a large LCD display, which displays an image of the route and automatically calculates the depth of communication up to 10 m, as well as the current in the line, as well as a compact autonomous generator with an output power of up to 20 watts and a range of up to 3 km.
Connection to the desired route is possible both by contact and contactless method.
TEKHNO-AS
Kolomna
Produced in: Kolomna, Moscow region
Mobile electrotechnical laboratory ETL TECHNOAS 2 based on Gazelle Next NN
The purposes of the ETL TECHNOAS 2 laboratory based on Gazelle Next NN are:
• – Testing and searching for damage to cable lines up to 10 kV + SNF (cross–linked polyethylene);
• - Posititioning of the location and depth of underground utilities (power and signal cables);
• – Identifying the nature of the damage and the distance to the damage site without burning the cable insulation;
• – Testing of the cable with alternating high voltage;
• – Tests of power cables and cable sheaths with cross-linked polyethylene insulation;
• – Measurement of insulation resistance of electrical circuits.
ETL TECHNOAS 2 laboratory based on Gazelle Next NN consists of following parts standartly:
1. – Color design;
1. – Laboratory compartment;
1. – Partition between compartments;
1. – Windows: rear side-blind, there is a plastic window with a cable coupling in the rear door;
1. – A 10x10 hatch in the lower right corner for cable output;
1. – Finishing of sidewalls and ceiling;
1. – Floor covering: autolinoleum;
1. – On-duty lighting: standard;
1. – Working lighting: fluorescent lamps;
1. – Furniture: main stand, soft seat.
Electrical safety system of ETL TECHNOAS 2 laboratory based on Gazelle Next NN incledes following parts:
• – MKZ safety control module;
• – Locking switches on the doors of the in/out compartment;
• – Audible alarm;
• – Light alarm;
• – Emergency shutdown button;
• – Input release with visible contact break.
Additional equipment of ETL TECHNOAS 2 laboratory based on Gazelle Next NN includes:
• – 12/220 V voltage converter;
• – Diesel/gasoline generator (for field operation);
• – Laboratory power management system;
• – Additional heater;
• – Air conditioning.
TEKHNO-AS
Kolomna
Produced in: Kolomna, Moscow region
The equivalent of the Ya6-127 network
NNPO im. M.V.Frunze
Nizhny Novgorod
Produced in: Nizhny Novgorod
Mobile laboratory for housing and communal services TECHNOAS
• Description of the TECHNOAS Housing and Communal Laboratory
o – Used for hydrodynamic flushing and emergency cleaning of sewage from sludge, sand, grease, household and industrial waste in sewer pipes.
o – Determining the location of underground utilities.
o – Search and tracing of metallic and non-metallic pipelines.
o – Determination of leakage coordinates by acoustic method in underground pressure steel, cast iron and plastic pipelines of heat and water supply systems, regardless of the depth of their laying, the type of soil, determining the exact location of the pipeline and the depth of its occurrence.
o – Search for manholes of wells under a layer of snow, soil, asphalt.
o – Analysis of the technical condition of the internal cavities of pipelines with a diameter of 60-2000 mm.
TEKHNO-AS
Kolomna
Produced in: Kolomna, Moscow region
Universal calibrator H4-301/1
Technical specifications:
Voltage reproduction range Uk 200 mV 0.07 + 0.01
DC: from 50 MV to 600 V, Uk 2 V 0.05 + 0.005
sub-bands (UK) 200 MV; 2; 20; 200; 600 V Uk 20 V 0.05 + 0.005
Basic error, ± (% of U + % of Uk): Uk 200 V 0.07 + 0.01
Uk 600 V 0.1 + 0.02
Voltage reproduction range Uk 200 mV 0.2 + 0.05
AC: from 1 mV to 600 V, sv. 20 to 40 kHz 0.2 + 0.1
sub-bands (Uk) 200 mV; 2; 20; 200; 600 V Uk 2; 20 V 0.15 + 0.02
Basic error, ± (% of U + % of Uk): from 20 Hz to 20 kHz 0.15 + 0.02
Uk 200 V; 600 V: 0.2 + 0.05
from 40 Hz to 1 kHz 0.2 + 0.05
DC power reproduction range: from 1 Ma to 200 mA,
sub-bands (Ic) 200 Ma; 2; 20; 200 mA Ic 200 Ma 0.1 + 0.02
Basic error, ± (% of I + % of Ic): Ic 2; 20; 200mA 0.1 + 0.01
Power reproduction range
AC: from 10 Ma to 200 mA,
sub-ranges (Ic) 200 Ma; 2; 20; 200 mA 0.15 + 0.05
Frequency range from 20 Hz to 1 k Hz
Basic error, ± (% of I + % of Ic):
USB interface
Operating temperature range from minus 10 to +50 C
Dimensions; weight 428×327×235× mm; 10 kg
MNIPI
Minsk
Produced in: Belarus, Minsk
Mobile laboratory for 0.4-10 kV cable lines based on a trailer (ETL-10)
Laboratory for 0.4-10 kV cable lines based on a trailer (ETL-10) includes:
1. Test facility
– Maximum rectified voltage up to 70 kV;
– Maximum AC voltage of the industrial frequency of 50 Hz to 50 kV.
2. Burning facility
– Maximum voltage up to 30 kV;
– Maximum current up to 80 A;
– Working hours are not limited;
– Switching stages is carried out without breaking the arc at the time of switching;
– The ability to start working from any stage of burning (when working with low–voltage cables);
- Built-in afterburning.
3. High voltage pulse generator
• – Output voltage 0...12 kV / 0...24 kV;
• – The pulse energy at each stage is 3000 J;
• – Built-in IDM for collaboration with the reflectometer.
5. High-voltage cable defects detector
• – Determining the location and depth of the cable at a depth of up to 10 m;
• – Tracing at a distance of up to 10 km;
• – Search for live electrical cables;
• – Search for places where the pipeline and cable intersect;
• – Determining the places of damage to cable lines;
• – Site surveys before excavation;
• – Search for places of damage to the external insulation of the cable;
• – GPS\GLONASS coordinates recording and mapping of found communications;
• – Cable selection from the bundle;
• – Search for the place of damage by acoustic method.
6. Autonomous air heater Planar
– An autonomous air heater Planar with a capacity of 2 kW or an analog with a 7.5 l fuel tank.
TEKHNO-AS
Kolomna
Produced in: Kolomna, Moscow region
Cable finder Success KBI-309M (frost-resistant)
from
95 400 ₽
Description of the cable finder Success KBI-309M
• – A traceroute receiver in the form of a monoblock with a frost-resistant LCD display.
• – Graphical representation of the route on the device screen.
• – Automatic calculation and display of the depth of the communication up to 10 m, as well as the current in the line.
Purpose of the cable finder Success KBI-309M
• – Search for live electrical cables.
• – Search and tracing of underground utilities (gas pipelines, pipelines, power and telephone cables).
• – Determination of the occurrence of underground utilities at a depth of up to 10 m.
Features of the AP-019M receiver
• – Modern digital tracer receiver-monoblock AP-019M.
• – The image of the route on the device screen.
• – Automatic calculation and display of the depth of communication and current in the line.
• – Several options for displaying information on the receiver indicator: "Route", "Graph", "Graph+", "Minimum maximum" and "2-frequencies" allow the operator to use the device's capabilities as efficiently as possible.
• – Additional functions when connecting external sensors.
• – Wide range of operating frequencies (50(60) / 100(120) / 512 / 1024 / 8192 / 32768 Hz, wide band 40...8000 Hz, radio 8...40 kHz).
• – Frost-resistant, working at temperatures up to -30 ° C.
• – Menu in two languages (Russian and English).
TEKHNO-AS
Kolomna
Produced in: Kolomna, Moscow region
Measuring modules of transmission and reflection coefficients P2-136
NNPO im. M.V.Frunze
Nizhny Novgorod
Produced in: Nizhny Novgorod
Leakage detector with the function of diagnosing shut-off valves Success AT-407ND
from
122 820 ₽
The leakage detector with the function of diagnosing shut-off valves "Success AT-407ND" is designed to detect places of depressurization of underground pipelines of heat, water, gas, oil supply systems at a depth of up to 3 m in channel and without channel laying.
The search for damage sites is carried out by the acoustic method.
The kit includes a set of "ADM-227", consisting of a small-sized acoustic sensor with a magnetic base and an extension pin.
The presence of the ADM-227 kit in the leak detector makes it possible to carry out work on leak detection and monitoring the condition of shut-off valves, both on metal and plastic pipes of small diameter.
The leak detector allows you to detect violations of the tightness of the shut-off valves. If the sealing of the shut-off element is violated, the product (liquid or gas) leaks. Characteristic acoustic leakage noises are detected by the high-quality microphone of the sensor kit "ADM-227".
TEKHNO-AS
Kolomna
Produced in: Kolomna, Moscow region
KRISMARS VT Optical Voltage Measuring Converter
Marsenergo
Saint Petersburg
Produced in: Saint Petersburg
Trace searcher with the function of saving GPS/GLONASS coordinates Success AG-309.60K
from
282 210 ₽
A trace searching kit for finding underground utilities (cable lines, metal pipelines, and other communications made of conductive materials).
As part of the kit, the receiver is in the form of a monoblock with a large LCD display, which displays an image of the route and automatically calculates the depth of communication up to 10 m, as well as the current in the line.
Built-in GPS\GLONASS module for determining and recording the coordinates of the location of communication.
"Probe" mode for tracing NON-METALLIC communications using an in-tube generator (optional).
The generator has increased power up to 180 watts and a range of up to 5 km. Connection to the desired route is possible both by contact and contactless method.
TEKHNO-AS
Kolomna
Produced in: Kolomna, Moscow region
High-frequency signal generators G4-211, G4-212
NNPO im. M.V.Frunze
Nizhny Novgorod
Produced in: Nizhny Novgorod
Cable detector with the ability to control the quality of insulation Athlete TEK-120GAZ-4N
from
505 770 ₽
Multifunctional trace searching kit for finding underground utilities (cable lines, metal pipelines and other communications made of conductive materials).
The presence of an acoustic sensor and a shock mechanism allows tracing NON-METALLIC pipelines, as well as searching for leaks from pipelines and searching for cable damage sites.
The isolation monitoring sensors DKI-117 and the sensor-detector of communication defects DODK-117 search for places of damage to the external insulation of communication.
The kit includes the most powerful multi-frequency generator with a range of up to 10 km. Connection to the desired route is possible both by contact and contactless method.
TEKHNO-AS
Kolomna
Produced in: Kolomna, Moscow region