Catalog
Back to search results
Muffle furnace LF-15/13-G1
Back to search results
Muffle furnace LF-15/13-G1
Durable ceramic muffle;
Semi-open heaters on four sides of the chamber;
Microprocessor temperature controller;
Conveniently located control panel and bright LED display;
Ease of management and control;
LED indicators of heater operation and protection operation;
Automatic shutdown of heating when opening the door;
The door opens up and faces the user with the cold side;
Alarm when the current temperature exceeds the limits of the permissible range;
Highly efficient thermal insulation of the housing;
The furnace body is made of high-quality sheet steel and painted with heat-resistant powder paint.
Semi-open heaters on four sides of the chamber;
Microprocessor temperature controller;
Conveniently located control panel and bright LED display;
Ease of management and control;
LED indicators of heater operation and protection operation;
Automatic shutdown of heating when opening the door;
The door opens up and faces the user with the cold side;
Alarm when the current temperature exceeds the limits of the permissible range;
Highly efficient thermal insulation of the housing;
The furnace body is made of high-quality sheet steel and painted with heat-resistant powder paint.
Muffle furnace LF-9/11-V2
Design features:
Special system of air intake and exhaust of combustion products with adjustable thrust;
Programmable microprocessor temperature controller;
Three programs of ten steps with the ability to set the temperature, heating speed and holding time for each step;
Manual heating mode with timer with sound notification and auto-off;
Durable ceramic muffle;
Closed heaters on four sides of the chamber;
Backlit graphic display;
Conveniently located control panel;
Automatic shutdown of heating when opening the door;
Sound and light alarm when the current temperature exceeds the limits of the permissible interval;
The door opens up and faces the user with the cold side;
Highly efficient thermal insulation of the housing;
The furnace body is made of high-quality sheet steel and painted with heat-resistant powder paint.
Technical specifications:
Maximum heating temperature, °C +1100
Temperature stability in steady-state thermal mode, °C ± 10
Warm-up time to the maximum temperature, no more than 120 min
Dimensions of the working chamber, WxHxD, not less than 200x150x290 mm
Overall dimensions, WxHxD, not more than 525x1015x620 mm
Rated supply voltage, 220 V
Rated power, W 5500
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Muffle furnace LF-2/13-G1
Design features:
Durable ceramic muffle;
Semi-open heaters on four sides of the chamber;
Microprocessor temperature controller;
Conveniently located control panel and bright LED display;
Ease of management and control;
LED indicators of heater operation and protection operation;
Automatic shutdown of heating when opening the door;
Alarm when the current temperature exceeds the limits of the permissible range;
Highly efficient thermal insulation of the housing;
The furnace body is made of high-quality sheet steel and painted with heat-resistant powder paint.
Technical specifications:
Maximum heating temperature, °C +1300
Temperature stability in steady-state thermal mode, °C ± 10
Warm-up time to maximum temperature, no more than 120 min
Dimensions of the working chamber, WxHxD, not less than 120x97x195 mm
Overall dimensions, WxHxD, not more than mm 400x535x510
Rated supply voltage, 220 V
Rated power, W 2200
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Muffle furnace LF-15/11-G2
Design features:
Programmable microprocessor temperature controller;
Three programs of ten steps with the ability to set the temperature, heating speed and holding time for each step;
Manual heating mode with timer with sound notification and auto-off;
Durable ceramic muffle;
Closed heaters on four sides of the chamber;
Backlit graphic display;
Conveniently located control panel;
Automatic shutdown of heating when opening the door;
Sound and light alarm when the current temperature exceeds the limits of the permissible interval;
The door opens up and faces the user with the cold side;
Highly efficient thermal insulation of the housing;
The furnace body is made of high-quality sheet steel and painted with heat-resistant powder paint.
Technical specifications:
Maximum heating temperature, °C +1100
Temperature stability in steady-state thermal mode, °C ± 10
Warm-up time to the maximum temperature, no more than 120 min
Dimensions of the working chamber, WxHxD, not less than mm 215x190x330
Overall dimensions, WxHxD, not more than mm 525x655x680
Rated supply voltage, 220 V
Rated power, W 6100
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Vacuum induction electric furnace with an antechamber VIP -20-16- F
The heating method is inducive
VakETO
Mosrentgen
Produced in: Moscow
Vacuum electric resistance furnace VUG-4-18
B – vacuum, 4 – the amount of the working space in dm3, 18 – the maximum operating temperature divided by 100, i.e., 1800 ° C.
VakETO
Mosrentgen
Produced in: Moscow
Muffle furnace LF-2/13-G2
Design features:
Programmable microprocessor temperature controller;
Three programs of ten steps with the ability to set the temperature, heating speed and holding time for each step
Manual heating mode with timer with sound notification and auto-off;
Durable ceramic muffle;
Semi-open heaters on four sides of the chamber;
Backlit graphic display;
Conveniently located control panel;
Automatic shutdown of heating when opening the door;
Sound and light alarms;
Highly efficient thermal insulation of the housing;
The furnace body is made of high-quality sheet steel and painted with heat-resistant powder paint.
Technical specifications:
Maximum heating temperature, °C +1300
Temperature stability in steady-state thermal mode, °C ± 10
Warm-up time to the maximum temperature, no more than 120 min
Dimensions of the working chamber, WxHxD, not less than 120x97x195 mm
Overall dimensions, WxHxD, not more than mm 400x535x510
Rated supply voltage, 220 V
Rated power, W 2200
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Muffle furnace LF-15/11-V2
Design features:
Special system of air intake and exhaust of combustion products with adjustable thrust;
Programmable microprocessor temperature controller;
Three programs of ten steps with the ability to set the temperature, heating speed and holding time for each step;
Manual heating mode with timer with sound notification and auto-off;
Durable ceramic muffle;
Closed heaters on four sides of the chamber;
Backlit graphic display;
Conveniently located control panel;
Automatic shutdown of heating when opening the door;
Sound and light alarm when the current temperature exceeds the limits of the permissible interval;
The door opens up and faces the user with the cold side;
Highly efficient thermal insulation of the housing;
The furnace body is made of high-quality sheet steel and painted with heat-resistant powder paint.
Technical specifications:
Maximum heating temperature, °C +1100
Temperature stability in steady-state thermal mode, °C ± 10
Warm-up time to the maximum temperature, no more than 120 min
Dimensions of the working chamber, WxHxD, not less than mm 215x190x330
Overall dimensions, WxHxD, not more than 525x1045x680 mm
Rated supply voltage, 220 V
Rated power, W 6100
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Vacuum electric furnace VZG-260-14
Vacuum electric furnace for heat treatment with accelerated cooling and precision soldering
VakETO
Mosrentgen
Produced in: Moscow
Muffle furnace LF-9/11-G1
Design features:
Durable ceramic muffle;
Closed heaters on four sides of the chamber;
Microprocessor temperature controller;
Conveniently located control panel and bright LED display;
Ease of management and control;
LED indicators of heater operation and protection operation;
Automatic shutdown of heating when opening the door;
The door opens up and faces the user with the cold side;
Alarm when the current temperature exceeds the limits of the permissible range;
Highly efficient thermal insulation of the housing;
The furnace body is made of high-quality sheet steel and painted with heat-resistant powder paint.
Technical specifications:
Maximum heating temperature, °C +1100
Temperature stability in steady-state thermal mode, °C ± 10
Warm-up time to maximum temperature, no more than 120 min
Dimensions of the working chamber, WxHxD, not less than 200x150x290 mm
Overall dimensions, WxHxD, not more than 525x625x620 mm
Rated supply voltage, 220 V
Rated power, W 5500
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Muffle furnace LF-15/11-G1
Design features:
Durable ceramic muffle;
Closed heaters on four sides of the chamber;
Microprocessor temperature controller;
Conveniently located control panel and bright LED display;
Ease of management and control;
LED indicators of heater operation and protection operation;
Automatic shutdown of heating when opening the door;
The door opens up and faces the user with the cold side;
Alarm when the current temperature exceeds the limits of the permissible range;
Highly efficient thermal insulation of the housing;
The furnace body is made of high-quality sheet steel and painted with heat-resistant powder paint.
Technical specifications:
Maximum heating temperature, °C +1100
Temperature stability in steady-state thermal mode, °C ± 10
Warm-up time to the maximum temperature, no more than 120 min
Dimensions of the working chamber, WxHxD, not less than mm 215x190x330
Overall dimensions, WxHxD, not more than mm 525x655x680
Rated supply voltage, 220 V
Rated power, W 6000
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Muffle furnace LF-9/13-G2
Design features:
Programmable microprocessor temperature controller;
Three programs of ten steps with the ability to set the temperature, heating speed and holding time for each step;
Manual heating mode with timer with sound notification and auto-off;
Durable ceramic muffle;
Semi-open heaters on four sides of the chamber; and
Backlit graphic display;
Conveniently located control panel;
Automatic shutdown of heating when opening the door;
Sound and light alarm when the current temperature exceeds the limits of the permissible interval;
The door opens up and faces the user with the cold side;
Highly efficient thermal insulation of the housing;
The furnace body is made of high-quality sheet steel and painted with heat-resistant powder paint.
Technical specifications:
Maximum heating temperature, °C +1300
Temperature stability in steady-state thermal mode, °C ± 10
Warm-up time to maximum temperature, no more than 120 min
Dimensions of the working chamber, WxHxD, not less than 200x150x290 mm
Overall dimensions, WxHxD, not more than 525x625x620 mm
Rated supply voltage, 220 V
Rated power, W 5500
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Vacuum electric furnace VOZH-2,5—20 for annealing
Composite material of the carbon-carbon system of different densities
VakETO
Mosrentgen
Produced in: Moscow
Muffle furnace LF-5/11-V1
Design features:
Special system of air intake and exhaust of combustion products with adjustable thrust;
Durable ceramic muffle;
Closed heaters on four sides of the chamber;
Microprocessor temperature controller;
Conveniently located control panel and bright LED display;
Ease of management and control;
LED indicators of heater operation and protection operation;
Automatic shutdown of heating when opening the door;
Alarm when the current temperature exceeds the limits of the permissible range;
Highly efficient thermal insulation of the housing;
The furnace body is made of high-quality sheet steel and painted with heat-resistant powder paint.
Technical specifications:
Maximum heating temperature, °C +1100
Temperature stability in steady-state thermal mode, °C ± 10
Warm-up time to the maximum temperature, no more than 120 min
Dimensions of the working chamber, WxHxD, not less than 200x110x190 mm
Overall dimensions, WxHxD, not more than mm 505x955x565
Rated supply voltage, 220 V
Rated power, W 2800
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Induction vacuum electric furnace IVP-1-22
a massive copper mold was used in the furnace, as well as a printed crucible made of stabilized (calcium oxide) zirconium dioxide. The furnace has been working for several years at one of the non-ferrous metallurgy enterprises in the production of platinum ingots according to GOST
VakETO
Mosrentgen
Produced in: Moscow
Muffle furnace LF-7/13-G2
Design features:
Programmable microprocessor temperature controller;
Three programs of ten steps with the ability to set temperature, temperature change rates and exposure time;
Manual heating mode with timer with sound notification and auto-off;
Durable ceramic muffle;
Semi-open heaters on four sides of the chamber;
Backlit graphic display;
Automatic shutdown of heating when opening the door;
Sound and light alarm when the current temperature exceeds the limits of the permissible interval;
Highly efficient thermal insulation of the housing;
The furnace body is made of high-quality sheet steel and painted with heat-resistant powder paint.
Technical specifications:
Maximum heating temperature, °C +1300
Temperature stability in steady-state thermal mode, °C ± 10
Warm-up time to the maximum temperature, no more than 120 min
Dimensions of the working chamber, WxHxD, not less than 200x110x285 mm
Overall dimensions, WxHxD, not more than 505x565x655 mm
Rated supply voltage, V 3300
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Vacuum electric furnace VZG-120-15
Vacuum electric furnace with accelerated argon cooling system for heat treatment
VakETO
Mosrentgen
Produced in: Moscow
Vacuum membrane pump PL.HM01.01.8 Primelab
from
150 000 ₽
1 supp.
The Primelab vacuum diaphragm pump PL.HM01.01.8 has excellent performance - up to 38 l/min at a maximum vacuum of 8 mbar. Suitable for a wide range of industrial and laboratory applications. It is used for working with chemically active substances due to the use of high-quality materials in its design that do not react with toxic reagents. The chambers are made of fluoroplastic, all parts have a fluoroplastic coating. Complies with IP20 protection class. Supplied complete with equipment sufficient for quick assembly and operation of the device. Namely this: vacuum pump, cable, instructions, passport, packaging (vacuum regulator and spare parts are not included in the kit and must be ordered separately).
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
HF-140-2 POZIS Pharmaceutical refrigerator
from
25 734 ₽
Total volume, l.
140
The volume of the refrigerator compartment, l.
140
Number of compressors, pcs.
1
Height, mm
910
Depth, mm
610
Width, mm
600
Weight, kg., no more
40
Rated power consumption, W
150
Maximum rated power, W
165
Voltage,
220 V
Warranty, years
2
Final report on pre-qualification for compliance with the requirements of Good Practice of the EAEU Distribution: yes
Cold storage
Auto refrigerator defrosting system
Temperature in the refrigerator, °C
+2... +15
Accuracy of temperature maintenance
±2°C
Thermal card: yes
Efficiency and energy consumption
Electricity consumption, kWh/day, not more
than 0.52
Climate class
UHL 4.2 (i.e. for moderate and cold climate)
Frequency, Hz
50
Approximate dimensions of the product with packaging
Net weight of the product, kg
40
Gross weight of the product, kg
43.5
Volume of packaging, m3
0,397
The length of the package, m
0.65
The width of the package, m
0.63
Height of the package, m
0.97
POZIS
Зеленодольск
Produced in: Zelenodolsk, Tatarstan
Monoblock liquid cooling unit MCHV-5
from
216 640 ₽
Designation
MCHV-5
Cooling capacity at Two.water= +15C, Tcond=+45C, Current.cp.=+30C, kW
5
Required pump capacity, m3/h
1,2
Pressure loss in the heat exchanger, kRa
30
Tula-Term
Tula
Produced in: Tula
VT12 Liquid thermostat
It is designed to maintain a set temperature of a liquid coolant circulating both in an internal bath and in external closed-type consumers.
Feed pump for external closed-type thermostating systems.
All-metal stamped tub with a volume of 12 liters and a depth of 150 mm.
The stability and uniformity of the temperature in the inner bath is not worse than ± 0.1 ° C.
The operating temperature range is +20...+200 °C.
Bath volume 12 l
Overall dimensions 420x330x430 mm
The open part of the bath is 150x260 mm
Bath depth 150 mm
Weight 14 kg
Power consumption 2.2 kW
Termeks
Tomsk
Produced in: Tomsk
Liquid low-temperature thermostat CRYO-T-05-01
The stability and uniformity of the temperature in the working bath is not worse than ± 0.01 ° C.
Bath volume 15 l
Overall dimensions 790x500x1180 mm
The open part of the bath is 125x190 mm
Bath depth 250 mm
Weight 119 kg
Power consumption 4.2 kW
Termeks
Tomsk
Produced in: Tomsk
Debinding furnace SNOL-25/2,5-I2VP-D
Designation
SNOL-25/2,5-I2VP-D
Volume, l
25
Temperature,oS
250
Supply voltage, V
380±15%+N+PE
Tula-Term
Tula
Produced in: Tula
Laboratory Drying cabinet SNOL-4.4,4.3,4/2,0 AND-SAT
from
878 840 ₽
The furnace SNOL-4.4,4.3,4/2,0 And-SB is designed to determine the aging of bitumen under the influence of high temperature and air at temperatures up to 200 ° C in accordance with GOST 33140-2014, DIN EN 12607-1, ASTM 2872-12 with forced air convection in stationary conditions. The furnace can be equipped with an air humidity sensor for other types of tests.
Tula-Term
Tula
Produced in: Tula
Collection for storage of purified water S-240
from
97 000 ₽
Designed for collecting, storing and distributing purified water obtained by various purification methods, with a capacity of 240 liters and 100% stainless steel, which allowed for a long service life.
Dimensions in terms of 690x660 mm
Weight 24 kg
Livam
Belgorod
Produced in: Belgorod
Liquid low-temperature thermostat CRYO-VIS-T-06-01
Operating temperature range -30...+100 °C
Four places for glass viscometers or a basket for determining the pour point of petroleum products.
The stability and uniformity of the temperature in the working bath is not worse than ± 0.02 ° C.
Bath volume 15 l
Overall dimensions 440x710x620 mm
The open part of the bath is 140x170 mm
Bath depth 320 mm
The size of the viewing window is 104x270 mm
Weight 56 kg
Power consumption 3.5 kW
Termeks
Tomsk
Produced in: Tomsk
Shaft furnace industrial SSHO-4.8/11
Designation
SSO-4.8/11
Power, kW
42
Diameter, mm
400
Height, mm
400
Tula-Term
Tula
Produced in: Tula
Circulation thermostat LT-117a
The LOIP LT-117a modification device consists of an immersion thermostat-circulator LOIP LT-100 and a working bath with a flat removable lid.
Technical specifications:
Temperature range:
without external cooling, °C
Current+10 ... +100
with tap water cooling °C
Tvods+5 ...+100
Accuracy of temperature maintenance, °C ± 0.1
The error of setting the set temperature, no more than ° C ± 0.2
Heater power, W 1900
Pump:
max. flow rate, l/min 7.5
pressure, 0.17 bar
Bath volume, l 17
The working fluid is water, water-glycerin mixture.
Open part of the bath / depth, mm 360x296/150
Overall dimensions, mm 535x335x370
Weight, kg 13
LOIP
Saint Petersburg
Produced in: Saint Petersburg
DIGITAL MICROSCOPE
The educational microscope is designed to observe transparent agents in transmitted light in a bright field, when studying natural sciences in schools of 2nd - 3rd stages and other educational institutions, as well as for various studies in laboratory practice.
Feodosia Optical Plant (FOZ)
Feodosia
Produced in: Crimea, Feodosia
Laboratory electric furnace CHO-10
from
153 403 ₽
Designation
SNO-10
Volume, l
10
The material of the working chamber
is ceramic
Heating
4 sides
Power consumption, W, max
4500
Minimum operating temperature, 0C
100
Tula-Term
Tula
Produced in: Tula
P-400 Flow Vacuum Trap
The LP-400(R) flow-through water trap is installed on the inlet flange of the diffusion pump and is designed to reduce the flow of working fluid vapors into the pumped volume by condensing them on the cooled elements of the freezing device.
Vakuummash
Kazan
Produced in: Kazan
LB23-Sh Laboratory bath
It is intended for thermostating samples in glasses, flasks and other laboratory utensils in cases when high accuracy of temperature maintenance is not required and good uniformity of the temperature field in the working volume is not needed.
The operating temperature range is Current +5...+200 °C.
Two workstations with a diameter of 110 mm with five steel O-rings, tripods and feet with a clip.
Stamped steel tub with a volume of 7 liters and a depth of 160 mm.
The volume of the bath is 7 liters
Overall dimensions 515x360x710 mm
The open part of the bath is 295x145 mm
Bath depth 160 mm
Weight 7.5 kg
Power consumption 2.5 kW
Termeks
Tomsk
Produced in: Tomsk
Muffle furnace LF-9/11-V2
Design features:
Special system of air intake and exhaust of combustion products with adjustable thrust;
Programmable microprocessor temperature controller;
Three programs of ten steps with the ability to set the temperature, heating speed and holding time for each step;
Manual heating mode with timer with sound notification and auto-off;
Durable ceramic muffle;
Closed heaters on four sides of the chamber;
Backlit graphic display;
Conveniently located control panel;
Automatic shutdown of heating when opening the door;
Sound and light alarm when the current temperature exceeds the limits of the permissible interval;
The door opens up and faces the user with the cold side;
Highly efficient thermal insulation of the housing;
The furnace body is made of high-quality sheet steel and painted with heat-resistant powder paint.
Technical specifications:
Maximum heating temperature, °C +1100
Temperature stability in steady-state thermal mode, °C ± 10
Warm-up time to the maximum temperature, no more than 120 min
Dimensions of the working chamber, WxHxD, not less than 200x150x290 mm
Overall dimensions, WxHxD, not more than 525x1015x620 mm
Rated supply voltage, 220 V
Rated power, W 5500
LOIP
Saint Petersburg
Produced in: Saint Petersburg