Design features:

Programmable microprocessor temperature controller;
Three programs of ten steps with the ability to set temperature, temperature change rates and exposure time;
Manual heating mode with timer with sound notification;
Reliable and stable Pt 100 temperature sensor;
Four-sided heating;
Forced air circulation in the working chamber;
Camera material – stainless steel;
Backlit graphic display;
Conveniently located control panel;
Sound and light alarm when the current temperature exceeds the limits of the permissible interval;
Independent overheating protection circuit with separate temperature sensor;
Reliable door closing mechanism;
High-quality silicone sealer;
Highly efficient thermal insulation of the housing;
The case is made of high-quality sheet steel and painted with heat-resistant powder paint;
Number of shelves: standard – 2, maximum – 8.

Technical specifications:

Maximum heating temperature, °C +300
The error of reproducing the set temperature ° C ± 3
Temperature maintenance error, ° C ± 1
Warm-up time to the maximum temperature, no more, min 45
Dimensions of the working chamber, (WxHxD), not less than mm 440x465x430
Overall dimensions, (WxHxD), not more than mm 785x680x745
Rated supply voltage, 220 V
Rated power, W 2200

Industrial Drying Cabinet SNOL (SHS) 4000/3-I2 V

Industrial drying cabinet SNOL (SHS) 4000/3-I2 V is designed for drying, tempering, aging, thermal testing and other types of heat treatment of various materials in an air environment at temperatures up to 350 (optionally up to 500) ° C with forced air convection in stationary conditions.

Tula-Term

Tula

Produced in: Tula

Vacuum drying cabinet with automatic adjustment SNVS-40/5

for carrying out heat treatment according to pre-created programs. The presence of remote control and a number of software options allows you to use the product for long-term heat treatment modes. Vacuum drying cabinets can be used for: - gentle drying of thermo- and oxygen-sensitive substances, such as food, medicinal, cosmetic products; - complete removal of residual moisture from heat-sensitive components with a complex shape, such as components of electronic equipment, jewelry, watches and other precision mechanics; - removal of air when filling the molds with a compound, followed by solidification at a given temperature; - removing air from the product and replacing it with another necessary gas medium; - tempering, annealing or aging of metals with the appropriate processing temperature in a vacuum or protective environment; - drying of products after washing in flammable solvents (special version); - testing of devices under low pressure conditions under various temperature conditions.

Tula

Produced in: Tula

Laboratory drying cabinet SNOL-F-25/500-I2

from 165 061 ₽

The laboratory drying cabinet SNOL-F-25/500-I2 is designed for thermal testing, aging, as well as drying, tempering and other types of heat treatment of various materials in an air environment at temperatures up to 500 ° C with natural or forced air convection in stationary conditions.

Tula

Produced in: Tula

Vacuum drying cabinet with automatic control SNVS-210/5

The series is designed for heat treatment according to pre-created programs. The presence of remote control and a number of software options allows you to use the product for long-term heat treatment modes. Vacuum drying cabinets can be used for: - gentle drying of thermo- and oxygen-sensitive substances, such as food, medicinal, cosmetic products; - complete removal of residual moisture from heat-sensitive components with a complex shape, such as components of electronic equipment, jewelry, watches and other precision mechanics; - removal of air when filling the molds with a compound, followed by solidification at a given temperature; - removing air from the product and replacing it with another necessary gas medium; - tempering, annealing or aging of metals with an appropriate processing temperature in a vacuum or protective environment; - drying of products after washing in flammable solvents (special version); - testing devices under low pressure conditions under various temperature conditions.

Tula

Produced in: Tula

Electric drying cabinet vacuum compression SNVS-4,5.4,0/2-I2PD

The electric drying vacuum compression cabinet SNVS-4,5.4,0/2-I2PD (autoclave) is designed for drying and heating various materials in an air environment, in vacuum, under pressure up to 1.5 atm. and in an inert gas environment at temperatures up to 250 oC.

Tula

vacuum compression furnace

heat

drying cabinet

Produced in: Tula

Electric cabinet vacuum drying SHSV-3,5.3,5.6/2.5-S

This electric vacuum drying cabinet is designed for drying and heating various materials in air and in vacuum at temperatures up to 250 ° C. A viewing window Ø 160 mm is installed in the door. The illumination of the working chamber is provided from the outside. An additional, independent security system is installed in the cabinet, interrupting the supply of the cabinet when operating temperatures exceed.

Tula

Produced in: Tula

Laboratory drying cabinets SHS-40/3,5

The electric drying cabinet SHS-40/3.5 is designed for drying, heating various materials in an air environment at a maximum temperature of 350 ° C. Technical specifications The electric cabinet operates at ambient temperature from 10 to 35 ° C and relative humidity up to 80% at 25 ° C. Operating temperature- 350 ⁰C Power consumption - 2500 W Dimensions of the working chamber WxDxH- 390x360x390 mm Dimensions WxDxH- 600x630x580 mm Weight - 67 kg

Tula

Produced in: Tula

Laboratory drying cabinet SNOL-F-67/350-I2

from 101 925 ₽

The laboratory drying cabinet SNOL-F-67 is designed for thermal testing, aging, as well as drying, tempering and other types of heat treatment of various materials in an air environment at temperatures up to 350 (optionally up to 500) ° C with natural or forced air convection in stationary conditions.

Tula

Produced in: Tula

Industrial Drying Cabinet SNOL (SHS) 1700/3-I2 V

from 1 318 704 ₽

Industrial drying cabinet SNOL (SHS) 1700/3-I2 V is designed for drying, tempering, aging, thermal testing and other types of heat treatment of various materials in an air environment at temperatures up to 350 (optionally up to 500) ° C with forced air convection in stationary conditions.

Tula

Vacuum drying cabinet with manual control SNVS-50/3.5

from 296 236 ₽

The SNVS-50/3.5 vacuum drying cabinet with a volume of 50 liters with manual vacuum adjustment is designed for heat treatment of materials at temperatures up to 350 with air access and in a vacuum controlled by manual valves. Thanks to modern temperature control, it demonstrates excellent performance of heat treatment modes. The measurement system complies with Russian standards and has certificates of entry into the SI State Register. Design for heat treatment in production and clean laboratories. The cabinet can be equipped with a software control device with an automatic timer and a wide selection of additional options.

Tula

Produced in: Tula

Industrial Drying Cabinet SNOL (SHS) 2000/5-I2 V

Industrial drying cabinet SNOL (SHS) 2000/5-I2 V is designed for drying, tempering, aging, thermal testing and other types of heat treatment of various materials in an air environment at temperatures up to 500 ° C with forced air convection in stationary conditions.

Tula

Produced in: Tula

Laboratory vacuum drying cabinets SHSV residual pressure in the chamber 10 mm Hg SHSV-14/2,5

The electric vacuum drying cabinet SHSV-11/2.5 is designed for drying and heating various materials in air and in vacuum at a maximum temperature of 250 ° C. In the model with the index "C", the door is made of heat- resistant glass. Technical specifications The electric cabinet operates at ambient temperature from 10 to 35 ° C and relative humidity up to 80% at 25 ° C Operating temperature- 250 ⁰C Power consumption - 1000 watts Dimensions of the working chamber - 200x350x200 mm Dimensions WxDxH- 450x930x470 mm Weight - 20 kg

Tula

Produced in: Tula

Laboratory drying cabinets SHS-14/2,5-C (glass door)

The electric drying cabinet SHS-14/2.5-C is designed for drying, heating various materials in an air environment at a maximum temperature of 250 ° C. Technical specifications The electric cabinet operates at ambient temperature from 10 to 35 ° C and relative humidity up to 80% at 25 ° C. Operating temperature- 250 ⁰C Power consumption - 1000 watts Dimensions of the working chamber WxDxH- 195x340x195 mm Dimensions WxDxH- 325x600x345 mm Weight - 16 kg

Tula

Produced in: Tula

Vacuum drying cabinet with automatic regulation SNVS-90/5

The series is designed for heat treatment according to pre-created programs. The presence of remote control and a number of software options allows you to use the product for long-term heat treatment modes. Vacuum drying cabinets can be used for: - gentle drying of thermo- and oxygen-sensitive substances, such as food, medicinal, cosmetic products; - complete removal of residual moisture from heat-sensitive components with a complex shape, such as components of electronic equipment, jewelry, watches and other precision mechanics; - removal of air when filling the molds with a compound, followed by solidification at a given temperature; - removing air from the product and replacing it with another necessary gas medium; - tempering, annealing or aging of metals with the appropriate processing temperature in a vacuum or protective environment; - drying of products after washing in flammable solvents (special version); - testing of devices under low pressure conditions under various temperature conditions.

Tula

Produced in: Tula

Laboratory drying cabinets SHS-14/2,5

The electric drying cabinet SHS-14/2.5 is designed for drying, heating various materials in air environment at a maximum temperature of 250 ° C. Technical specifications The electric cabinet operates at ambient temperature from 10 to 35 ° C and relative humidity up to 80% at 25 ° C. Operating temperature- 250 ⁰C Power consumption - 1000 watts Dimensions of the working chamber WxDxH- 195x340x195 mm Dimensions WxDxH- 325x600x445 mm Weight - 16 kg

Tula

Produced in: Tula

Vacuum drying cabinet with manual control SNVS-25/5

from 384 845 ₽

The SNVS-25/5 vacuum drying cabinet with a volume of 25 liters with manual vacuum adjustment is designed for heat treatment of materials at temperatures up to 500 with air access and in a vacuum controlled by manual valves. Thanks to modern temperature control, it demonstrates excellent performance of heat treatment modes. The measurement system complies with Russian standards and has certificates of entry into the SI State Register. Design for heat treatment in production and clean laboratories. The cabinet can be equipped with a software control device with an automatic timer and a wide selection of additional options.

Tula

Produced in: Tula

Industrial Drying Cabinet SNOL 3000/5

High-temperature industrial drying cabinet SNOL 3000/5 with a working chamber volume of 3000 liters and a maximum operating temperature of 500 degrees with software

Tula

Produced in: Tula

May be interested in

Muffle furnace MIMP-17M

The furnace can be used as a universal laboratory muffle furnace in metallurgical, jewelry and ceramic production, in orthopedic dentistry, chemical and food laboratories. Technical specifications The furnace operates at ambient temperatures from 10 to 35 ° C and relative humidity up to 80% at 25 ° C. The designation of the furnace when ordering: muffle furnace MIMP-17M, where 17 indicates the volume of the working chamber of the furnace in liters. Power consumption - 5000 watts Dimensions of the working chamber W×D×B – 305×300×185 mm Dimensions W×D×B – 570×580×550 mm Weight – 60 kg

Tula

Produced in: Tula

EXHAUST HOOD MODELS: LC-600 ZVN, LC-600 ZVP, LC-900 ZVN, LC-900 ZVP

from 12 570 ₽

Designed for local removal of polluted air – for example, from atomic absorption spectrometers installed on laboratory tables. There are two models – for mounting to the wall and for mounting to ceiling structures. 1. LC-600 ZVN Width - 600 STEEL - 12 570 ₽ 2. LC-600 ZVP Width - 600 STEEL - 13 550 ₽ 3. LC-900 ZVN Width - 1260 STEEL - 14,820 ₽ 4. LC-900 ZVP Width - 1260 STEEL - 16,830 ₽

г. Санкт- Петербург

Produced in: Saint Petersburg

Vacuum compression furnace SNVS-4,5.5,5/3-I2PD

Vacuum compression furnace SNVS-4,5.5,5/3-I2PD is designed for drying, degassing in vacuum and under pressure at temperatures up to 300 0C.

Tula

vacuum compression furnace

Materials Science

heat

Produced in: Tula

Metal tripod Sh-20/18, pack.15 pcs, MiniMedProm

from 336 ₽

The tripod is made of aluminum, which allows them to be sterilized at any temperature; this material provides lightness and durability. It can be used in water baths. The tripod has an individual packaging. Designed for storing test tubes.

Suponevo

Produced in: Bryansk region

Industrial Drying Cabinet SNOL (SHS) 4000/3-I2 V

Tula

Produced in: Tula

Water bath for six persons LOIP LB-162

Temperature range, °C (Current +5) ... +105 Accuracy of temperature maintenance, °C ± 1 Temperature setting error, °C ± 1 Power consumption from AC 220 V, no more, 1600 W Number of jobs, pcs 6 The diameter of the workplace, mm 110 Volume of working fluid, l 24 Useful part of the bath / depth, mm 428x300 / 140 Overall dimensions, mm 530x330x220 Weight of the device without liquid is not more than kg 9

Saint Petersburg

Produced in: Saint Petersburg

HF-400-4 POZIS Pharmaceutical refrigerator

from 45 352 ₽

Total volume, l. 400 Number of compressors, pcs. 1 Height, mm 1950 Depth, mm 610 Width, mm 600 Weight, kg., no more 74 Rated power consumption, W 250 Maximum rated power, 250 W Voltage, 220 V Warranty, years 2 Final report on pre-qualification for compliance with the requirements of Good Practice of the EAEU Distribution: yes Additional transparent doors that prevent unwanted air exchange between compartments. Cold storage Auto refrigerator defrosting system Temperature in the refrigerator, °C +2... +15 Accuracy of temperature maintenance ±2°C Thermal card: yes Efficiency and energy consumption Electricity consumption, kWh/day, no more than 1.39 Climate class UHL 4.2 (i.e. for moderate and cold climate) Frequency, Hz 50 Approximate dimensions of the product with packaging Net weight of the product, kg 74 Gross weight of the product, kg 78.5 Volume of packaging, m3 0.827 The length of the package, m 0.65 The width of the package, m 0.63 Height of the package, m 2.02

Зеленодольск

Produced in: Tatarstan, Zelenodolsk

Muffle furnace MIMP-10M

The furnace can be used as a universal laboratory muffle furnace in metallurgical, jewelry and ceramic production, in orthopedic dentistry, chemical and food laboratories. Technical specifications The furnace operates at ambient temperatures from 10 to 35 ° C and relative humidity up to 80% at 25 ° C. The designation of the furnace when ordering: muffle furnace MIMP-10M, where 10 indicates the volume of the working chamber of the furnace in liters. Power consumption - 4500 W Dimensions of the working chamber W×D×B – 205×290×185 mm Dimensions W×D×B – 460×580×550 mm Weight – 52 kg

Tula

Produced in: Tula

Vacuum chemical-resistant membrane pump PL.HM03.01.45 Primelab

from 90 000 ₽

The chemical-resistant diaphragm pump PL.HM03.01.45 is designed for a wide range of industrial and laboratory tasks, mainly related to pumping vapors/gases. The pumping speed is 38 l/min with a maximum residual pressure of 45 mbar. The device has fairly compact dimensions. Operates from a standard 220 V power supply. Does not require special preparation before use. Post-warranty and warranty service is available throughout the Russian Federation. Characteristics Valve(s) material Standard: chloroprene copolymer NO-68-1 (TU 38 0051166-98) A country Russia Power, W 180 Overall dimensions, L×W×H, mm 289x140x200 Protection class acc. to DIN EN60529 IP20 Noise level, dB no more than 75 Nutrition 220 V/50 Hz Ultimate vacuum, mbar abs. 45 Excess pressure, bar. maximum allowable 0.5 Productivity, l/min 38 Fitting, inch (mm) External diameter, 9 mm. Maximum current, A 1.2 Device weight, kg 7.6 Working chamber material PTFE (polytetrafluoroethylene) Equipment Vacuum pump, cable, instructions, passport, packaging (vacuum regulator and spare parts are not included in the kit and must be ordered separately).

Mytishchi

Produced in: Mytishchi, Moscow region

Cryothermostat liquid FT-311-80

Technical specifications: Operating temperature range, °C -80...+100 Accuracy of temperature maintenance, °C ± 0.1 The discreteness of the temperature display, ° C 0.1 Cooling capacity at 20°C, W 510 Pump capacity in the discharge (suction) circuit, not less than, l/min 8 Volume of working fluid, l 11 Open part of the bath/depth, mm 175x135/200 Power supply, V/Hz 220/50 Power consumption, no more than 4.4 kW Overall dimensions, mm 535x555x985 Weight without working fluid, kg 80

Saint Petersburg

Produced in: Saint Petersburg

Vacuum drying cabinet with automatic adjustment SNVS-40/5

Tula

Produced in: Tula

Magnetic stirrer with heating for 2 liters PL-RH-atom

from 19 000 ₽

Characteristics Maximum heating temperature of the working surface, °C 150 A country Russia Overall dimensions, L×W×H, mm 165.5x148x64 Protection class acc. to DIN EN60529 IP21 Color orange Mixing 150-2000 rpm Number of mixing places 1 Maximum volume of mixed liquid, l 2 Working surface of the plate (platform) fireproof glass (glass ceramics) Slab working surface size, LxW, mm 120x120 mm Accuracy of maintaining the plate temperature, % 1 Displayed temperature resolution, °C 0.1 External temperature sensor PT1000 Power consumption, W 300 Device weight, kg 0.9

Mytishchi

Produced in: Mytishchi, Moscow region

PLP-03 Programmable plate

Laboratory heating plate with two independent heating sections and with the possibility of programming heating modes. The heating platforms are made of duralumin. The size of the total heating surface: 440x284 mm. Heating temperature: 40-400 °C.

Tomsk

Produced in: Tomsk

Water purification system SOV-M-10

Minsk

water receiving plant

reverse osmosis

Minsk

Produced in: Belarus, Minsk

MARK-404 Dissolved Oxygen Analyzer

Measurement of dissolved oxygen concentration (CRC) in aqueous media. Continuous monitoring of the concentration of dissolved oxygen in the aeration tanks of treatment facilities, monitoring of the condition of water bodies, including fish-breeding open/closed pools. Warranty of 48 months for deliveries by RFShest channels Possibility of independent measurements at six points Automatic thermal compensation Air oxygen calibration Long-lasting sensor The service life of the sensor is at least 10 years The possibility of placing the display unit at a remote distance from the control points Up to 1000 meters Communication with external devices Galvanically isolated 4-20 or 0-20 mA current output and RS-485 port High contrast LED screen

Nizhny Novgorod

Produced in: Nizhny Novgorod

Circulation thermostat LT-424b

The LOIP LT-424b modification device consists of an immersion thermostat-circulator LOIP LT-400 and a working bath with a lean-to hinged lid. Technical specifications: Temperature range: without external cooling, °C Current+10 ... +200 with tap water cooling °C Tvods+5 ...+200 Accuracy of temperature maintenance, °C ± 0.01 The error of setting the set temperature, no more than, ° C ± 0.02 Heater power, W 2200 Pump: max. flow rate, l/min 6...12 pressure, 0.4 bar Bath volume, l 24 The working fluid is water, silicone oil. Open part of the bath / depth, mm 360x296/200 Overall dimensions, mm 532x335x400 Weight, kg 15.8

Saint Petersburg

Produced in: Saint Petersburg