Technological thermostat STT-40

The fan body and impeller are made of polypropylene, which has a very high chemical resistance, especially to concentrated inorganic acids and their vapors. The design rules out the contact of the transported air with any parts that are prone to corrosion. 1.Autonomous acid-resistant fan 1200 cubic meters per hour Width - 570 POLYPROPYLENE - 48 620 ₽ 2.Autonomous acid-resistant fan 1200 cubic meters per hour (with a frame for wall mounting) Width - 570 POLYPROPYLENE - 52 520 ₽ 3.Autonomous acid-resistant fan 1700 cubic meters per hour Width - 664 POLYPROPYLENE- 52 940 ₽ 4.Autonomous acid-resistant fan 1700 cubic meters per hour (with a frame for wall mounting) Width - 664 POLYPROPYLENE - 56 840 ₽

Capacity: 4.0 (- 10%) l/h Volume of the built -in water collector: 9.0 l Heating elements: TEN 3.0 kW 220V (stainless steel) – 1 pc. The quality of the produced water GOST R 58144-2018 "Distilled water", FS.2.2.0019.18 "Water for injection" Type of current, frequency, voltage: alternating single-phase, 50 Hz, 220 V Power consumption: 2.7 kW Overall dimensions (L×W×C), mm: 290×320×570 Weight: 13.5 kg Warranty period: 24 months from the date of sale Registration certificate for a medical device No. FSR 2010/07649 dated November 01 , 2016 Electrical conductivity of the produced water: 2-2.5 microns/cm The temperature of the produced water is from 70 to 85 °C Source water flow rate (at t of water 10 °C): 30 (±10%) l/h Source water pressure: 0.1-0.4 MPa Version: Desktop with adjustable supports. Wall mounting is possible Coefficient of water purification from radionuclides: at least 4000 Service life: at least 10 years

High-temperature furnaces are capable of heating materials up to 1700 degrees. The scope of their application covers the heat treatment of various materials in an inert medium or vacuum. TULA-TERM furnaces are used for heat treatment of plastics, ceramics, metals, alloys, lacquers and other materials. The equipment allows sintering, annealing, soldering, quenching, drying, burning and molding. In industry, our installations are most often used for quenching parts and sintering hard alloys.

High-temperature industrial drying cabinet SNOL 3000/5 with a working chamber volume of 3000 liters and a maximum operating temperature of 500 degrees with software

Vacuum compression furnace SNVS-4,5.5,5/3-I2PD is designed for drying, degassing in vacuum and under pressure at temperatures up to 300 0C.

Designation SSO-6.18/11 Power, kW 40 Diameter, mm 600 Height, mm 1800

The LI-630 integrated flanged trap is installed inside the diffusion pump instead of the standard oil reflector, without increasing the overall dimensions of the diffusion pump. The LI-630 trap performs the function of an oil reflector, is installed instead of a standard oil reflector in pumps, has an additional number of cooled screens for capturing oil return flow vapors (more than that of the MU trap), covers the entire area of the input high-vacuum flange.

Electric tubular laboratory furnaces are designed for calibration of thermocouples and dilatometers, heat treatment and determination of the melting point of metals, alloys and other work at temperatures up to 1100 ° C in stationary laboratories. SUOL tubular furnaces are used in many industries and agriculture, are indispensable in factory and research laboratories.

The LOIP LT-224a modification device consists of an immersion thermostat-circulator LOIP LT-200 and a working bath with a flat removable lid. Technical specifications: Temperature range: without external cooling, °C Current+10 ... +200 with tap water cooling °C Tvods+5 ...+200 Accuracy of temperature maintenance, °C ± 0.1 The error of setting the set temperature, no more than ° C ± 0.2 Heater power, W 2000 Pump: max. flow rate, l/min 10.5 pressure, 0.27 bar Bath volume, l 24 The working fluid is water, water-glycerin mixture, silicone oil. Open part of the bath / depth, mm 360x296/200 Overall dimensions, mm 535x335x420 Weight, kg 14.2

Vacuum resistance furnaces are necessary for heating products before pressure treatment, for sintering, degassing, quenching, annealing, soldering and chemical-technological processes. Such furnaces among all the variety of thermal equipment are considered the most environmentally friendly – heat treatment is carried out at t up to +2500 ° C in a purified vacuum. Under certain conditions, vacuum furnaces are used to work with neutral gases. The outer part of the furnace is made of stainless steel and is cooled by liquid. The inner part of the working chamber, where the heat treatment of materials is carried out, is made of an alloy of molybdenum and tungsten. The components are characterized by a low inertia force, reduced gas separation. The settings are available on the control panel, where the instruments, automatic and manual control switches are located. At every enterprise of the electronic industry, nuclear power, an explosion-proof vacuum resistance furnace is needed. The same applies to areas where various products undergo heat treatment at the stage of production and preparation for use

Productivity, thousand tab./hour 209 Number of stations 41 Max. pressing force, tn 10 Number of threads 2 Diameter of tablets, mm 6-20 Height of tablets, mm 1.5-9 Matrix filling depth, mm 18 Rotor material steel 40x13 Filling hopper capacity, l 20(30) Stepless rotor speed change The change in the speed of rotation of the feeder is independent Supply voltage 380V, 50Hz Power consumption, kW/hour 5.78 Weight, kg 2400 Dimensions, mm 900x900x1800

Purpose: obtaining distilled water of 3 types according to GOST R 58144-2018 "Distilled water", FS.2.2.0020.18 "Purified water" Capacity: 70.0 (-10%) l/h Heating elements: electrodes The quality of the produced water: GOST R 58144-2018 "Distilled water", FS.2.2.0020.18 "Purified water" Type of current, frequency, voltage: alternating three-phase, 50 Hz, 380 V Power consumption: 42.0 kW Overall dimensions (L×W×C), mm: 740×550×1010 Weight: 64 kg Warranty period: 14 months from the date of sale Registration certificate for a medical device No. FSR 2008/03707 dated December 05 , 2008 Electrical conductivity of the produced water: 3-4.5 microns/cm The temperature of the produced water: 50 °C Source water flow rate (at 10 °C water temperature): 500 (+-10%) l/h Source water pressure: 0.1-0.4 MPa Overall dimensions of the control unit (L×W×C), mm: 400×220×500 Execution: outdoor Coefficient of water purification from radionuclides: at least 4000 Service life: at least 8 years

Blue laser pointers of the KLM-P405-10-3 series with a collimated beam of low divergence radiation are optimal sources for demonstration purposes.

The LOIP LT-111a modification device consists of an immersion thermostat-circulator LOIP LT-100 and a working bath with a flat removable lid. Technical specifications: Temperature range: without external cooling, °C Current+10 ... +100 with tap water cooling °C Water+5 ... +100 Accuracy of temperature maintenance, °C ± 0.1 The error of setting the set temperature, no more than ° C ± 0.2 Heater power, W 1900 Pump: max. flow rate, l/min 7.5 pressure, bar 0.17 Bath volume, l 11 The working fluid is water, water-glycerin mixture. The open part of the bath / depth, mm 160x240/200 Overall dimensions, mm 268x335x420 Weight, kg 10

Buffer bath with a volume of 6 liters. Feed pump with magnetic coupling for external closed-type thermostating systems. Cooling capacity 500 W at +20 °C. The operating temperature range is -10...+80 °C. Overall dimensions 320x540x470 mm Weight 37 kg Power consumption 1.5 kW

Vacuum membrane pump PL.HM02.02.10 Primelab is an effective, compact and powerful device for creating a vacuum or pumping gases. It makes virtually no noise, is suitable for constant use, and does not cause discomfort. Overheating protection is provided. All chambers are made of fluoroplastic, connections are coated with fluoroplastic, and valves are made of FFKM, which guarantees maximum safety of the device. Elements and parts of the device do not react with working substances. Device performance depends on the camera connection method: • Independent. Pumping speed – 38 l/min with a maximum of 45 mbar; • Parallel. Pumping speed – 76 l/min at a maximum pressure of 45 mbar; • Consistent. Pumping speed – 38 l/min at a maximum pressure of 10 mbar.

Portable device for periodic measurement of the volume fraction of oxygen in various gases (hydrogen, natural gas, nitrogen, argon, helium, etc.). Mainly used for monitoring oxygen in the cooling circuit of generators, electrolysis plants, gas pipelines of boilers, monitoring the air of the working area. The warranty is 24 months for deliveries across the Russian Federation. High-precision measurement of oxygen microconcentrations Unique, patent-protected sensor design Exceptional selectivity to oxygen molecules Insensitivity to humidity, carbon dioxide, oil vapor Stable operation in a gas environment of any composition Ease of operation Automatic temperature and barocompensation The duration of measurements is 2-3 minutes Atmospheric air calibration Routine maintenance - no more than 1 time per year Built-in flow stimulator for forced sample delivery High contrast LED indicator IP54 housing case Protection from dust and moisture Built-in long-lasting battery At least 1000 charge/discharge cycles Carrying strap