Laboratory drying cabinets SHS-40/3,5-M (oven fan)

Electric Furnace SNVS-14.20/12- I3B is designed for medium vacuum heat treatment of parts made of carbon, stainless and high-strength steels (such as VT-1-0, OT-4, VT6C, VT-23, etc.), magnetic materials to obtain a light surface of the part, as well as quenching during vacuum cooling. The furnace can be used with the maximum dimensions of the cage: diameter — 1400 mm, height — 2000 mm for annealing particularly precise axisymmetric parts (cones, cylinders, shells of double curvature). • Execution of the electric furnace — shaft. • The type of cage is monoblock or composite. • The loading direction is vertical. • Loading method — universal shop lifting mechanisms. The furnace is controlled by an industrial controller with installed software. The technological parameters of the product, the controls are displayed as a graphical mnemonic on the monitor. With touch control. It provides the setting of thermal parameters, the ability to save programs, the ability to save graphs by date, view and remove the archive to an external USB drive. The technical process will be carried out according to the program entered into the control panel or PC of the vacuum electric furnace, with the ability to adjust the values of temperature, exposure time. The electric furnace provides for operation in automatic and manual modes.

Design features: Special system of air intake and exhaust of combustion products with adjustable thrust; Programmable microprocessor temperature controller; Three programs of ten steps with the ability to set the temperature, heating speed and holding time for each step; Manual heating mode with timer with sound notification and auto-off; Durable ceramic muffle; Semi-open heaters on four sides of the chamber; Backlit graphic display; Conveniently located control panel; Automatic shutdown of heating when opening the door; Sound and light alarm when the current temperature exceeds the limits of the permissible interval; The door opens up and faces the user with the cold side; Highly efficient thermal insulation of the housing; The furnace body is made of high-quality sheet steel and painted with heat-resistant powder paint. Technical specifications: Maximum heating temperature, °C +1300 Temperature stability in steady-state thermal mode, °C ± 10 Warm-up time to maximum temperature, no more than 120 min Dimensions of the working chamber, WxHxD, not less than 200x150x290 mm Overall dimensions, WxHxD, not more than 525x1015x620 mm Rated supply voltage, 220 V Rated power, W 5500

Designation: SNOT-20.26.20/5- I2-In Camera (WxDxH), mm: 2000x2600x2000 Temperature, 0C: 500 Fan: Yes Hearth drive: EL/MECH Door opening: EL/fur Power supply, V: 380 Power, Ru, kW: 130 Class: 2

The series is designed for heat treatment according to pre-created programs. The presence of remote control and a number of software options allows you to use the product for long-term heat treatment modes. Vacuum drying cabinets can be used for: - gentle drying of thermo- and oxygen-sensitive substances, such as food, medicinal, cosmetic products; - complete removal of residual moisture from heat-sensitive components with a complex shape, such as components of electronic equipment, jewelry, watches and other precision mechanics; - removal of air when filling the molds with a compound, followed by solidification at a given temperature; - removing air from the product and replacing it with another necessary gas medium; - tempering, annealing or aging of metals with the appropriate processing temperature in a vacuum or protective environment; - drying of products after washing in flammable solvents (special version); - testing of devices under low pressure conditions under various temperature conditions.

Electric tubular laboratory furnaces are designed for calibration of thermocouples and dilatometers, heat treatment and determination of the melting point of metals, alloys and other work at temperatures up to 1250 ° C in stationary laboratories. SUOL tubular furnaces are used in many industries and agriculture, are indispensable in factory and research laboratories.

Designation SNO 30/17 Rated power Pmax, kW 12 Power supply voltage U, In 3 phases + N+PE 380 Maximum operating temperature T slave, oS 1700

Buffer bath with a volume of 6 liters. Feed pump with magnetic coupling for external closed-type thermostating systems. Cooling capacity 500 W at +20 °C. The operating temperature range is -10...+80 °C. Overall dimensions 320x540x470 mm Weight 37 kg Power consumption 1.5 kW

Technical characteristics: - Platform movement - reciprocating; - The operating frequency range of the platform vibrations is from 20 to 200 kol/min; - The swing of the platform - 10 mm; - Platform dimensions - 315x210 mm; - Platform capacity: flat-bottomed flask 1000 ml - 2 pcs; flat-bottomed flask 500 ml - 2 pcs; flat-bottomed flask 100 ml - 4 pcs; - Maximum power consumption - 120 W; - AC power supply (50 Hz) - 220 ± 10 V; - Overall dimensions - 350x295x150 mm; - Weight - 13.0 kg.

Technical specifications the maximum temperature value in the thermostat is 95 °C. the range of water heating is from the current temperature to 95 ° C. The accuracy of automatic temperature maintenance is 0.5 °C. power supply parameters at which technical characteristics are normalized: type of current – alternating single-phase; voltage , V — 220±22; AC frequency , Hz — 50 ±1; the power consumption when entering the mode should be no more than, kVA — 4; the power consumption while maintaining the temperature should be no more than, kVA - 2. Operating conditions: ambient temperature – from plus 10 to plus 35 ° C.; relative humidity, from 65 to 80%. the electrical insulation resistance between the electrical circuits and the housing at ambient temperature (20 ± 5) ° C and relative humidity (80 ± 3)% is not less than 20 mOhm. electrical insulation between the electrical circuits and the housing under the conditions of clause 2.8. must withstand an AC voltage of 1.5 kV sinusoidal frequency of 50 Hz. overall dimensions not more than, mm: 520x420x480. tank volume – 40 liters. the average service life is at least 10 years. the weight of the thermostat is not more than 26 kg.

Design features: Special system of air intake and exhaust of combustion products with adjustable thrust; Durable ceramic muffle; Closed heaters on four sides of the chamber; Microprocessor temperature controller; Conveniently located control panel and bright LED display; Ease of management and control; LED indicators of heater operation and protection operation; Automatic shutdown of heating when opening the door; The door opens up and faces the user with the cold side; Alarm when the current temperature exceeds the limits of the permissible range; Highly efficient thermal insulation of the housing; The furnace body is made of high-quality sheet steel and painted with heat-resistant powder paint. Technical specifications: Maximum heating temperature, °C +1100 Temperature stability in steady-state thermal mode, °C ± 10 Warm-up time to the maximum temperature, no more than 120 min Dimensions of the working chamber, WxHxD, not less than 200x150x290 mm Overall dimensions, WxHxD, not more than 525x1015x620 mm Rated supply voltage, 220 V Rated power, W 5500

The AVD-50/16 unit consists of a NVD-200 series-connected two-rotor vacuum pump and a 2NVR-60D plate-rotor vacuum pump. The pumps are connected to each other by means of an adapter, which acts as both a pipeline and a support unit. The AVD-50/16 unit can operate continuously at an inlet pressure of no more than 133 Pa (1 mm Hg) or pumping out one or more sealed vessels with a total volume of 3.5 m3 from atmospheric to maximum residual pressure for 8 hours.

Refrigerant 404a Total volume, l. 180 The volume of the freezer / NTO, l. 180 Number of compressors, pcs. 1 Height, mm 870 Height with wheels, mm 940 Depth, mm 720 Width, mm 1310 Weight, kg., no more 80,5 Rated power consumption, W 250 Maximum rated power, W 275 Voltage, 220 V Warranty, 1 year Final report on pre-qualification for compliance with the requirements of Good Practice of the EAEU Distribution: yes Freezer compartment The temperature in the freezer, °C -18...-40 Thermal card: yes Efficiency and energy consumption Electricity consumption at t storage -18°C and t roc +25°C, kWh/day, no more than 0.81 Climate class UHL 4.2 (i.e. for moderate and cold climate) Frequency, Hz 50 Approximate dimensions of the product with packaging Net weight of the product, kg 80,5 Gross weight of the product, kg 93.5 Volume of packaging, m3 0,965 The length of the package, m 0,75 Width of the package, m 1.34 Height of the package, m 0.96

Industrial drying cabinet SNOL (SHS) 2000/5-I2 V is designed for drying, tempering, aging, thermal testing and other types of heat treatment of various materials in an air environment at temperatures up to 500 ° C with forced air convection in stationary conditions.

Characteristics The discreteness of setting the specified speed of rotation of the motor shaft is 10 rpm Resolution of displayed motor shaft rotation speed 10 rpm Resolution of displayed temperature (when using external temperature sensor PT1000) 0.1 °C Maximum armature length 80 mm Power consumption 20 W Connection – external temperature sensor PT1000 (sold separately) Dimensions, weight Overall dimensions, LxWxH 380x220x120 mm Weight 4.4 kg Contents of delivery 1) Primelab PL-R-basic mixer; 2) instruction manual combined with a passport; 3) anchor for the stirrer in a fluoroplastic shell 8*50 mm; 4) power cable with Euro plug. Notes The device controls the speed of rotation of the motor shaft, so the speed of rotation of the armature may differ from the speed of rotation of the motor shaft. The maximum rotation speed of the armature depends on the size of the mixing element, the volume and viscosity of the liquid, the shape of the vessel, etc.

Explosion-proof drying cabinet SNOL-67 is designed for drying, tempering, aging, thermal testing and other types of heat treatment of various materials in an air environment at temperatures up to 240 ° C with natural or forced air convection in stationary conditions. The environment is a potentially explosive mixture of air and gases, vapors, mists of categories IIA and IIB.

It is designed to maintain a set temperature of a liquid coolant circulating both in an internal bath and in external closed-type consumers. Feed pump for external closed-type thermostating systems. All-metal stamped tub with a volume of 10 liters and a depth of 200 mm. The stability and uniformity of the temperature in the inner bath is not worse than ± 0.1 ° C. The operating temperature range is +20...+200 °C. The volume of the bath is 10 liters Overall dimensions 400x275x480 mm The open part of the bath is 120x200 mm Bath depth 200 mm Weight 14 kg Power consumption 2.2 kW

designation - SNOL-F-120/350-I2 volume,l - 120 temperature,oS - 350 Supply voltage, V - 220±10%+PE