Catalog
Back to search results
Set of devices for CRYO-VIS-T-06 the State Standard 20287 method B
Back to search results
Set of devices for CRYO-VIS-T-06 the State Standard 20287 method B
It is used in determining the pour point of petroleum products in accordance with the State Standard 20287 (method B).
Set of devices GOST 11851 method A
It is intended for placement in the BF bath and is used in determining the mass fraction of paraffins in oil in accordance with the method A of the State Standard 11851.
Termeks
Tomsk
Produced in: Tomsk
A set of BNTI devices-05-04- 4K
It is intended for placing vessels with samples in the working baths of the BNTI 05 04 bath when determining the low-temperature properties of petroleum products, if appropriate test vessels are available.
Suitable for placing vessels with samples for the State Standard 20287 (Method A), EN 23015 or ASTM D97.
Termeks
Tomsk
Produced in: Tomsk
A set of CRYO-T devices-05-01- K
It is used in determining the low-temperature characteristics of petroleum products and organic chemical products in accordance with the State Standard 5066 (Method B) and GOST 18995.5.
Termeks
Tomsk
Produced in: Tomsk
Sensor holder LTA-4DSH14
The stopper holder made of Teflon allows you to mount securely the temperature sensor of LTA electronic thermometers with a diameter of 4 mm in the 14/23-inch laboratory glassware.
Termeks
Tomsk
Produced in: Tomsk
A set of CRYO-VT-01-2K devices
It is used for testing in accordance with GOST 12801, GOST 11501, GOST 33136 and GOST 11505.
Termeks
Tomsk
Produced in: Tomsk
Set of devices EN 23015 (ASTM D97)
It is used for determining the turbidity or fluidity temperature of petroleum products in accordance with EN 23015 and ASTM D97.
For testing, additional sets of devices BNTI 05 04 K and BNTI 05 04 3K are required.
Termeks
Tomsk
Produced in: Tomsk
LT-DP Sensor Holder
The spring holder for LT 300 or LT electronic thermometers allows you to simply and securely mount the temperature sensor on the walls of laboratory utensils so that it does not touch either its bottom or the wall.
This allows temperature measurements to be carried out not only conveniently, but also correctly.
Termeks
Tomsk
Produced in: Tomsk
Set of devices for BNTI-05-04 GOST 9090
A set of devices is used to determine the oil content in oil paraffins in accordance with the State Standard 9090 and is intended for placement in a liquid bath BNTI 05 04.
Termeks
Tomsk
Produced in: Tomsk
VIS-T-D3 Viscometer Holder
It is designed for use in CRYO VIS T 05 and CRYO VIS T 05 01 thermostats until 2016.
Termeks
Tomsk
Produced in: Tomsk
Basket VT-ro-3K
It is designed to accommodate six cylinders for hydrometers with a diameter of up to 54 mm in thermostats VT-ro-01, VT-ro-02 or CRYO-VT-ro-03. A basket with a height-adjustable bottom allows the cylinders to be immersed in the coolant to the required depth.
Number of jobs 6
Weight 1.1 kg
Termeks
Tomsk
Produced in: Tomsk
Holder THERMOTEST-D1-16/20
The holder with flat steel springs allows you to install and securely fix up to 6 verifiable thermometers with a diameter of the submerged part from 16 to 20 mm.
It is designed for calibration thermostats THERMOTEST-100 and THERMOTEST-300.
Termeks
Tomsk
Produced in: Tomsk
Set of devices the State Standard 5960
It is used in determining the brittleness temperature of polyvinyl chloride plastic by express method in accordance with the State Standard 5960.
Termeks
Tomsk
Produced in: Tomsk
VIS-T-D2 Viscometer Holder
It is the holder with a screw clip for reference viscometers.
It is designed for use in VIS T 06, VIS T 06 01 and VIS T 11 thermostats
Termeks
Tomsk
Produced in: Tomsk
Spring THERMOTEST holder-DP1-9/16
Allows you to install and securely fix up to 6 verifiable thermometers with a diameter of the submerged part from 9 to 16 mm.
The design of the holder eliminates damage to glass thermometers.
It is designed for calibration thermostats THERMOTEST-100 and THERMOTEST-300.
Termeks
Tomsk
Produced in: Tomsk
Sensor holder LTA-4DSH14
The stopper holder made of Teflon allows you to mount securely the temperature sensor of LTA electronic thermometers with a diameter of 4 mm in the 14/23-inch laboratory glassware.
Termeks
Tomsk
Produced in: Tomsk
Device for lifting and lowering samples LA-220
Designed for immersion of objects in the baths of LOIP LT thermostats and LOIP LB-200 precision thermostatic baths to a predetermined depth. Thermostatable objects are placed on a movable pallet, which can be fixed at any required depth. The device is installed on the casing of thermostats and precision thermostatic baths instead of a hinged lid and is equipped with its own removable lid.
Bath volume, l 17 and 24
Pallet size, mm 260x320
Maximum immersion depth, mm 200
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Bracket for mounting the AE-4/AE-5 disstillator on the wall
from
3 600 ₽
The bracket for mounting the distiller provides the possibility of not only desktop, but also wall-mounted installation of the aquadistillator at the required height.
Livam
Belgorod
Produced in: Belgorod
Discs with high sealing capacity for SVB connections (aluminum) for ISO-F flanges
Vakuummash
Kazan
Produced in: Kazan
Set of devices GOST 11851 method A
It is intended for placement in the BF bath and is used in determining the mass fraction of paraffins in oil in accordance with the method A of the State Standard 11851.
Termeks
Tomsk
Produced in: Tomsk
LB63-32/50K Basket
The height-adjustable bottom allows the tubes to be immersed in the coolant to the required depth.
Overall dimensions 515x310x215 mm
Weight 2.8 kg
Termeks
Tomsk
Produced in: Tomsk
Transitional centering rings (aluminum / stainless steel) with O-ring of circular cross-section
The ISO-KF connection (DIN 28 403 and ISO 2861) allows quick installation and replacement of components in vacuum systems. The connection consists of two symmetrical ISO-KF flanges (1), a centering ring with an O-ring seal (2) and a quick-release clamp (3). High-vacuum ISO-KF connections can be mounted without using a tool by simply turning the nut of the quick-release clamp.
Vakuummash
Kazan
Produced in: Kazan
ISO-F flanges with a side and a locking ring for clamping flange connections (steel)
Vakuummash
Kazan
Produced in: Kazan
Tripod for test tubes LA-208
Number of sockets, pcs 15
Hole diameter, mm 22
Immersion depth, mm 200
Overall dimensions (WxDxH), mm 180x80x215
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Heating element for a 3.5 kW 220 V distiller
from
1 860 ₽
The tank for the 3.5 kW aquadistillator is made of stainless steel.
Livam
Belgorod
Produced in: Belgorod
A set of BNTI devices-05-04- 4K
It is intended for placing vessels with samples in the working baths of the BNTI 05 04 bath when determining the low-temperature properties of petroleum products, if appropriate test vessels are available.
Suitable for placing vessels with samples for the State Standard 20287 (Method A), EN 23015 or ASTM D97.
Termeks
Tomsk
Produced in: Tomsk
Set of VT18-K devices
The set of devices is designed to accommodate thermostatically controlled objects in the inner bath of the VT18 or VT18-2 liquid thermostat when they are immersed to a depth of 40 or 70 mm from the bottom of the inner bath.
Overall dimensions 350x260x70 mm
Weight 2.1 kg
Termeks
Tomsk
Produced in: Tomsk
A set of CRYO-T devices-05-01- K
It is used in determining the low-temperature characteristics of petroleum products and organic chemical products in accordance with the State Standard 5066 (Method B) and GOST 18995.5.
Termeks
Tomsk
Produced in: Tomsk
CF rotating caps
ConFlat (CF) standard connections are used to ensure the connection of components of vacuum systems operating in the field of high and ultra-high vacuum.
Vakuummash
Kazan
Produced in: Kazan
A set of CRYO-VT-01-2K devices
It is used for testing in accordance with GOST 12801, GOST 11501, GOST 33136 and GOST 11505.
Termeks
Tomsk
Produced in: Tomsk
Heating element for 1.5 kW 220 V distiller
from
1 980 ₽
The tank for the 1.5 kW aquadistillator is made of stainless steel.
Livam
Belgorod
Produced in: Belgorod