Liquid low-temperature thermostat CRYO-T-05-01

The Primelab vacuum diaphragm pump PL.HM01.01.8 has excellent performance - up to 38 l/min at a maximum vacuum of 8 mbar. Suitable for a wide range of industrial and laboratory applications. It is used for working with chemically active substances due to the use of high-quality materials in its design that do not react with toxic reagents. The chambers are made of fluoroplastic, all parts have a fluoroplastic coating. Complies with IP20 protection class. Supplied complete with equipment sufficient for quick assembly and operation of the device. Namely this: vacuum pump, cable, instructions, passport, packaging (vacuum regulator and spare parts are not included in the kit and must be ordered separately).

Total volume, l. 140 The volume of the refrigerator compartment, l. 140 Number of compressors, pcs. 1 Height, mm 910 Depth, mm 610 Width, mm 600 Weight, kg., no more 40 Rated power consumption, W 150 Maximum rated power, W 165 Voltage, 220 V Warranty, years 2 Final report on pre-qualification for compliance with the requirements of Good Practice of the EAEU Distribution: yes Cold storage Auto refrigerator defrosting system Temperature in the refrigerator, °C +2... +15 Accuracy of temperature maintenance ±2°C Thermal card: yes Efficiency and energy consumption Electricity consumption, kWh/day, not more than 0.52 Climate class UHL 4.2 (i.e. for moderate and cold climate) Frequency, Hz 50 Approximate dimensions of the product with packaging Net weight of the product, kg 40 Gross weight of the product, kg 43.5 Volume of packaging, m3 0,397 The length of the package, m 0.65 The width of the package, m 0.63 Height of the package, m 0.97

Designation MCHV-5 Cooling capacity at Two.water= +15C, Tcond=+45C, Current.cp.=+30C, kW 5 Required pump capacity, m3/h 1,2 Pressure loss in the heat exchanger, kRa 30

It is designed to maintain a set temperature of a liquid coolant circulating both in an internal bath and in external closed-type consumers. Feed pump for external closed-type thermostating systems. All-metal stamped tub with a volume of 12 liters and a depth of 150 mm. The stability and uniformity of the temperature in the inner bath is not worse than ± 0.1 ° C. The operating temperature range is +20...+200 °C. Bath volume 12 l Overall dimensions 420x330x430 mm The open part of the bath is 150x260 mm Bath depth 150 mm Weight 14 kg Power consumption 2.2 kW

Designation SNOL-25/2,5-I2VP-D Volume, l 25 Temperature,oS 250 Supply voltage, V 380±15%+N+PE

The furnace SNOL-4.4,4.3,4/2,0 And-SB is designed to determine the aging of bitumen under the influence of high temperature and air at temperatures up to 200 ° C in accordance with GOST 33140-2014, DIN EN 12607-1, ASTM 2872-12 with forced air convection in stationary conditions. The furnace can be equipped with an air humidity sensor for other types of tests.

Designed for collecting, storing and distributing purified water obtained by various purification methods, with a capacity of 240 liters and 100% stainless steel, which allowed for a long service life. Dimensions in terms of 690x660 mm Weight 24 kg

Operating temperature range -30...+100 °C Four places for glass viscometers or a basket for determining the pour point of petroleum products. The stability and uniformity of the temperature in the working bath is not worse than ± 0.02 ° C. Bath volume 15 l Overall dimensions 440x710x620 mm The open part of the bath is 140x170 mm Bath depth 320 mm The size of the viewing window is 104x270 mm Weight 56 kg Power consumption 3.5 kW

Designation SSO-4.8/11 Power, kW 42 Diameter, mm 400 Height, mm 400

The LOIP LT-117a modification device consists of an immersion thermostat-circulator LOIP LT-100 and a working bath with a flat removable lid. Technical specifications: Temperature range: without external cooling, °C Current+10 ... +100 with tap water cooling °C Tvods+5 ...+100 Accuracy of temperature maintenance, °C ± 0.1 The error of setting the set temperature, no more than ° C ± 0.2 Heater power, W 1900 Pump: max. flow rate, l/min 7.5 pressure, 0.17 bar Bath volume, l 17 The working fluid is water, water-glycerin mixture. Open part of the bath / depth, mm 360x296/150 Overall dimensions, mm 535x335x370 Weight, kg 13

The educational microscope is designed to observe transparent agents in transmitted light in a bright field, when studying natural sciences in schools of 2nd - 3rd stages and other educational institutions, as well as for various studies in laboratory practice.

Designation SNO-10 Volume, l 10 The material of the working chamber is ceramic Heating 4 sides Power consumption, W, max 4500 Minimum operating temperature, 0C 100

The LP-400(R) flow-through water trap is installed on the inlet flange of the diffusion pump and is designed to reduce the flow of working fluid vapors into the pumped volume by condensing them on the cooled elements of the freezing device.

It is intended for thermostating samples in glasses, flasks and other laboratory utensils in cases when high accuracy of temperature maintenance is not required and good uniformity of the temperature field in the working volume is not needed. The operating temperature range is Current +5...+200 °C. Two workstations with a diameter of 110 mm with five steel O-rings, tripods and feet with a clip. Stamped steel tub with a volume of 7 liters and a depth of 160 mm. The volume of the bath is 7 liters Overall dimensions 515x360x710 mm The open part of the bath is 295x145 mm Bath depth 160 mm Weight 7.5 kg Power consumption 2.5 kW

Design features: Special system of air intake and exhaust of combustion products with adjustable thrust; Programmable microprocessor temperature controller; Three programs of ten steps with the ability to set the temperature, heating speed and holding time for each step; Manual heating mode with timer with sound notification and auto-off; Durable ceramic muffle; Closed heaters on four sides of the chamber; Backlit graphic display; Conveniently located control panel; Automatic shutdown of heating when opening the door; Sound and light alarm when the current temperature exceeds the limits of the permissible interval; The door opens up and faces the user with the cold side; Highly efficient thermal insulation of the housing; The furnace body is made of high-quality sheet steel and painted with heat-resistant powder paint. Technical specifications: Maximum heating temperature, °C +1100 Temperature stability in steady-state thermal mode, °C ± 10 Warm-up time to the maximum temperature, no more than 120 min Dimensions of the working chamber, WxHxD, not less than 200x150x290 mm Overall dimensions, WxHxD, not more than 525x1015x620 mm Rated supply voltage, 220 V Rated power, W 5500